ring Indoor Cam User Guide

: June 13, 2024
: Ring

Table of Contents

Quick Start
PRODUCT SPECIFICATIONS
RECYCLING YOUR DEVICE PROPERLY
FOR USERS IN THE UNITED STATES
FOR USERS IN CANADA
Documents / Resources

User Guide
**Indoor Cam

**

Quick Start

Open the Ring app and select Set Up a Device.
Then follow the in-app instructions.
Scan this code.
This identifies your Ring device to make setup fast and easy.

Power it up.
First, plug the included power cable into the back of your Indoor Cam.
Then, plug the power supply into an outlet.

ring Indoor Cam - power supply

Download the Ring App.
The Ring App walks you through setting up and managing your Ring Cam.
Search for “Ring” in one of the app stores below, or visit ring.com/app

Set up your Indoor Cam in the Ring app.
In the Ring app, select Set Up a Device.
When prompted, select Security Cams and follow the in-app instructions.
Blue light flashing?
If the light on the front of your Indoor Cam is flashing after setup, it’s updating its software.
Do not unplug your Indoor Cam while the light is flashing!

Install your Indoor Cam.
Indoor Cam is happy just about anywhere inside. It comes ready to sit on a flat surface like a table or shelf, but can also be mounted to a wall or ceiling.
Choose a spot where it can provide the view you want, within reach of a power outlet.
How to install Indoor Cam on a table of shelf:
It’s all ready, already! Place it at your chosen location, then plug it in. Your Indoor Cam is now ready to protect you.
Once you’re done, check out the live video in the Ring app to make sure you have the view you want.

How to install Indoor Cam on a wall:
Remove the base. Unscrew it using a standard Phillips-head screwdriver (not included). Re-attach the base. Screw it into the back of your Indoor Cam with the “UP” arrow on the bracket pointing upwards. Remove the mounting bracket. Slide it down. It’ll come right off the base. Drive the screws. Hold the plate against your wall, making sure the “UP” arrow is pointing up, and mount it with the included screws. Mount your Cam. Guide the grooves in the base onto the hooks on the bracket. Slide Indoor Cam down to secure it to the wall. Plug it in. Once secure, plug the power cord into your Indoor Cam, then plug the adapter into a power outlet.
Adjust the view. Now check out the live video in the Ring app to make sure you have the view you want. How to install Indoor Cam on a ceiling:
Remove the mounting bracket. Slide it down. It’ll come right off the base. Drive the screws. Hold the plate against your ceiling, and mount it with the included screws. Mount your Cam. Guide the grooves in the base onto the hooks on the bracket. Slide Indoor Cam down to secure it to the ceiling. Plug it in. Once secure, plug the power cord into your Indoor Cam, then plug the adapter into a power outlet.

Adjust the view. In the Ring App, select your Indoor Cam, then go to Device Settings, select Video Settings, and tap Rotate Video.
Now check out the live video in the Ring app to make sure you have the view you want.
Review, share and download.
Your new device comes with a free 30-day trial of our Ring Protect video recording service.
To continue your subscription and save your videos, please visit ring.com /protect-plans

What is Ring Protect?
Ring Protect is a subscription service that stores videos from your Ring devices.
Why do I want it?
Ring lets you interact with visitors and monitor your property in real time, while Ring Protect allows you review and share those videos anytime.
How much does it cost?
Ring Protect starts at $3 USD/month or $30 USD/year per Ring doorbell or camera.
How do I sign up?
Simply log into your Ring account at ring.com/protectplans, and follow the on- screen instructions.
$4 AUD, $4.50 NZD, $5 CAD per month or
$40 AUD, $45 NZD, $50 CAD per year

IMPORTANT PRODUCT INFORMATION
Safety and Compliance Information
Use Responsibly. Read all instructions and safetinformation before use.
SAFETY INFORMATION
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONSCOULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE
Ring Indoor Cam and its accessories are for indoor use only.
Do not expose your device or adapter to liquids. Ifyour device or adapter gets wet, carefully unplugall cables without getting your hands wet andwait for the device and adapter to dry completelbefore plugging them in again. Do not attemptto dry your device or adapter with an externalheat source, such as a microwave oven or a hairdryer. If the device or adapter appear damaged,discontinue use immediately. Use only accessoriessupplied with the device to power your devicTo avoid risk of electric shock, do not touch yourdevice or any wires connected to your devicduring a lightning storm.

PRODUCT SPECIFICATIONS

Model Number: 8SN1S9
Electrical Rating: 100-240 VAC, 50/60 Hz
(using included power supply)
Operating Temperature: 23°F to 113°F
(-5°C to 45°C)

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to amazon.com/devicesupport.
TERMS OF SERVICE AND WARRANTY
Use of the product is subject to your registration with Ring and your agreement with the Terms of Service found at ring.com/terms. To review your warranty coverage, please refer to the enclosure inside this box or visit ring.com/warranty.

FOR USERS IN THE UNITED STATES

FCC Compliance Statement (for products subject to Part 15)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by inputting such Product’s FCC ID (which can be found on the device) into the FCC ID Search form available at fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is Ring LLC, 1523 26th Street Santa Monica, CA 90404.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

FOR USERS IN CANADA

Innovation, Science and Economic Development
Canada (ISED) Compliance
This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s license- exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Information Regarding Exposure to Radio Frequency Energy This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

For additional help, visit
ring.com/help
Or give us a call
US 1 800 656 1918
Canada 1 855 300 7289
Worldwide +1 310 929 7085
For a list of all our customer
support numbers, visit
ring.com/callus
For information on our warranty, theft
protection, and Ring Protect Plans, see
ring.com/legal
© 2021 Ring LLC or its affiliates.
Ring and all related marks are trademarks
of Ring LLC or its affiliates.