Milesight GD11 Docking Station Kit User Guide
- June 9, 2024
- Milesight
Table of Contents
Milesight GD11 Docking Station Kit
Safety Precautions
Mile sight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide.
- The device must not be disassembled or remodeled in any way.
- Do not place the device outdoors where the temperature is below/above operating range. Do not place the device close to objects with naked flames, heat source (oven or sunlight), cold source, liquid and extreme temperature changes.
- The device must never be subjected to shocks or impacts.
- Do not power off the device when it’s upgrading or formatting, or it will cause operations stem error.
Copyright © 2011-2023 Milesight.
All rights reserved. All information in this guide is protected by copyright
law. Whereby, no organization or individual shall copy or reproduce the whole
or part of this user guide by any means without written authorization from
Xiamen Milesight IoT Co., Ltd.
For assistance, please contact Milesight technical support: Email:
iot.support@milesight.com Support Portal: support
.milesight-iot.com Tel: 86-592-5085280 Fax: 86-592-5023065 Address: Building
C09, Software Park III, Xiamen 361024, China
Revision History
| Date | Doc Version | Description |
|---|---|---|
| Jan. 17, 2023 | V 1.0 | Initial version |
Product Introduction
Overview
Docking station kit GD11 is mainly designed for DS7610 IoT Display to achieve interactive collaboration with screen operations.
Features
Plug-and-play Type-C power supply and bidirectional power supply available Provides easy installation, flexible mounting options, and specialized design to hide wires Support extra DI/DO/RS485 industrial serial ports via optional docking station Provide SDKs to develop and install 3rd-Party Android applications on DS7610 to allows to customize systems Built-in LED indicator to know working status
Specifications
Data Interfaces
IO|
Ports| 1 × DI + 1 × DO
Connector| 3.5 mm Terminal Block
Digital Input| Dry contact, Galvanic Isolation
Digital Output| SPDT Relay Contact Rating: 3A@DC Max: 30 V or AC Max: 250V
Serial Port
Port| 1 × RS485
Connector| 3.5 mm Terminal Block
Terminal Resistor| 1 × 120 Ω Resister Switch
Baud Rate| 1200~115200 bps
Mode| DTU Transparent
USB
Ports| 2 × Type-C Ports
USB Port 1| 1 Power supply connecto
USB Port 2| Data transmission between docking station and DS7610
2. Bidirectional power supply connector
Others
Reset Button| 1 × Reset Button (Internal)
LED Indicator| 1 × Power
Physical Characteristics
Power Supply| 5 VDC by USB Type-C Port
Color & Material| Black, PC+ABS
Ingress Protection| IP30
Operating Temperature| -20°C to +50°C (-4℉ to +122℉)
Relative Humidity| 0% ~ 95% (non-condensing) at 25°C/77℉
Dimensions| 70 × 45 × 13 mm (2.75 × 1.77 × 0.51 in)
Installation| Desktop, Wall Mounting
Hardware Introduction
Packing List
If any of the above items is missing or damaged, please contact your sales Representative
2 Hardware Overview
120 Ω Terminal Resistor Switch: the device will add a 120Ω termination resistor to avoid data corrupting reflections if RS485 data rate is high
Dimensions(mm)
Power Supply
Docking station can be powered via both Type-C ports. Choose one of the following methods to power up the IoT Display
-
Powered by a POWER Type-C port
Connect type-C(POWER) port to 5VDC power supply.
In this way, the docking station can alsobeused to power DS7610 via another -
Powered by DS7610
Connect DS7610 to docking station via type-C port (communication) to provide the power supply
Installation
The docking station can be placed on a desktop or mounted onto a wall.
-
Take off the back cover, and fix the wall plugs into the wall according to the drilling position as referred
-
Screw the cover on the mounting positions and install back the device
App Development
Milesight provides Developer API document to allow DS7610 to use this docking
station:
https://github.com/Milesight-IoT/DS7610-SDK
Before using docking station kit on DS7610, ensure the DS7610 firmware version
is 72.0.0.5 r2and later.