INSIGNIA NS-AC501 600mA AC Adapter Set User Guide
- June 13, 2024
- Insignia
Table of Contents
NS-AC501 600mA AC Adapter Set
User Guide
Final
flat size: 228.6 x 114.3 mm
Final fold size: 57.15 x 114.3 mm
Quick Setup Guide | NS-AC501 / NS-AC501-C
600mA AC Adapter Set
PACKAGE CONTENTS
- Universal AC adapter
- 7 adapter tips
- Quick Setup Guide
FEATURES
Before using your new product, please read these instructions to
prevent any damage.
Check
out these important safety instructions to keep yourself and your devices
safe.
Warning: Identifying the correct voltage and polarity settings and adjusting the product is the user’s responsibility.
- This adapter should only be used with a 120V power outlet. Follow all necessary safety precautions.
- Not recommended for use by children.
- Failure to adjust the adapter settings to match your connected device’s requirements can result in damage to the device.
COMPATIBILITY
Your device is compatible with this adapter if:
- The correct tip is available
- Your device’s voltage is between 3 and 12 V DC
- Your device’s input does not require more than 600mA (0.6A) of current
- Your device has a positive polarity
CHOOSING A TIP
Carefully test the tips by gently inserting them into the DC jack of your
device. Choose a tip that fits snugly, but do not force it to fit.
Note: If you have your old adapter, you can compare the connector of the
old adapter to the available tips.
SETTING UP YOUR ADAPTER
You can find your device’s input, polarity, and voltage on the device itself,
on its old adapter, or in its manual.
Contact the manufacturer if you cannot find this nformation. Using incorrect
settings could damage your device.
- Check the input of the device you are connecting to your adapter. Do not use this adapter if your device requires more than 600mA (0.6A) of current.
- Check the voltage of your device, then slide the voltage selector on your adapter to the same voltage. Do not use this adapter if your device’s voltage is not between 3 and 12 V DC.
- Check the polarity of the device you are connecting to your adapter.
-
If your device has a positive polarity, connect the chosen tip to the adapter’s connector.
POSITIVE POLARITY
-
If your device has negative polarity, do NOT use this adapter to power your device.
USING YOUR ADAPTER
Warning: If your device does not work, immediately unplug the adapter.
- Connect the adapter to your device, then connect it to a power outlet. Use or charge your device as usual.
TROUBLESHOOTING
My device isn’t working.
- Immediately unplug the adapter.
- Check the polarity of your adapter and make sure it matches the polarity of the device you want to charge.
- Make sure that your device requires less than 600mA (.6A) of current.
- Make sure that the voltage selector is set to the correct voltage.
- Make sure that you have selected the correct tip.
My adapter is hot.
- It is normal for an adapter to feel warm during use. Make sure that it is placed in a well-ventilated area.
- If your adapter feels abnormally hot, check your adapter’s settings and make sure that it is compatible with your device.
SPECIFICATIONS
- Input: 120V AC
- Output: 3, 4.5, 6, 7.5, 9, or 12V DC 600mA
LEGAL NOTICES
FCC Statement
Caution: Changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Canadian Notice
CAN ICES-3 B/NMB-3 B
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>