BLACK DECKER BHFEV182B Cordless Hand And Stick Vacuum Cleaner Instruction Manual

: June 17, 2024
: Black Decker

Table of Contents

BLACK DECKER BHFEV182B Cordless Hand And Stick Vacuum Cleaner
Product Information
Product Usage Instructions
Intended use
Safety instructions
Using your appliance
Additional safety instructions
Electrical safety
Cleaning and emptying the vacuum
Trouble shooting
Technical Data
Guarantee
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACK DECKER BHFEV182B Cordless Hand And Stick Vacuum Cleaner

$BLACK-DECKER-BHFEV182B-Cordless-Hand-And-Stick-Vacuum-Cleaner-FIG- $2$$

Product Information

Specifications

Model: BHFEV182B, BHFEV182C, BHFEV1825C, BHFEV182CP, BHFEV1825CP
Language: English
Intended Use: Vacuum cleaning purposes
Power: 6V, 12V, 18V

Product Usage Instructions

Safety Instructions

Failure to follow the warnings and instructions listed below may result in electric shock, fire, and/or serious injury.

Read all safety warnings and instructions carefully.
The intended use is described in this manual. Do not use any accessory or attachment or perform any operation other than those recommended in this instruction manual as it may present a risk of personal injury.
Retain this manual for future reference.

Using Your Appliance

Do not use the appliance to pick up liquids or any materials that could catch fire.
Do not use the appliance near water or immerse it in water.
Never pull the charger lead to disconnect the charger from the socket. Keep the charger lead away from heat, oil, and sharp edges.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities if they have been given supervision or instruction concerning the safe use of the appliance.
Children should not play with the appliance or perform cleaning and user maintenance without supervision.

Inspection and Repairs

Before use, check the appliance for damaged or defective parts. Do not use the appliance if any part is damaged or defective. Have any damaged or defective parts repaired or replaced by an authorized repair agent. Regularly check the charger lead for damage and replace it if necessary. Never attempt to remove or replace any parts other than those specified in this manual.

Additional Safety Instructions

Unplug the charger before cleaning the charger or charging base.
Store the appliance in a dry place when not in use.
Ensure that children do not have access to stored appliances.

FAQ (Frequently Asked Questions)

Q: Can I use this vacuum cleaner to pick up liquids?
A: No, the appliance is not designed to pick up liquids or any materials that could catch fire.
Q: Can children use this vacuum cleaner?
A: This appliance can be used by children aged 8 years and above if they have been given supervision or instruction concerning the safe use of the appliance. However, children should not play with the appliance or perform cleaning and user maintenance without supervision.
Q: Can I repair or replace damaged parts myself?
A: No, it is recommended to have any damaged or defective parts repaired or replaced by an authorized repair agent. Never attempt to remove or replace any parts other than those specified in the manual.

Intended use

Your BLACK+DECKER BHFEV182B, BHFEV182C, BHFEV182CP, BHFEV1825C and BHFEV1825CP 4 in 1 cordless vacuum cleaners have been designed for vacuum cleaning purposes. These appliances are intended for household use only.

Read all of this manual carefully before operating the appliance.

Safety instructions

Warning! Read all safety warnings and all instructions
Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.

The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
Retain this manual for future reference.

Using your appliance

Do not use the appliance to pick up liquids or any materials that could catch fire.
Do not use the appliance near water.
Do not immerse the appliance in water.
Never pull the charger lead to disconnect the charger from the socket. Keep the charger lead away from heat, oil and sharp edges.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.

Inspection and repairs

Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

Do not use the appliance if any part is damaged or defective.
Have any damaged or defective parts repaired or replaced by an authorized repair agent.
Regularly check the charger lead for damage. Replace the charger if thelead is damaged or defective.
Never attempt to remove or replace any parts other than those specified in this manual.

Additional safety instructions

After use

Unplug the charger before cleaning the charger or charging base.
When not in use, the appliance should be stored in a dry place.
Children should not have access to stored appliances.

Residual risks

Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: u Injuries caused by touching any rotating/moving parts.

Injuries caused when changing any parts, blades or accessories.
Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks.
Impairment of hearing.
Health hazards caused by breathing dust developed when using your tool (for example:- working with wood, especially oak, beech and MDF.)

Chargers

Your charger has been designed for a specific voltage. Always check that the mains voltage corresponds to the voltage on the rating plate.
Warning! Never attempt to replace the charger unit with a regular mains plug.

Use your BLACK+DECKER charger only to charge the battery in the appliance with which it was supplied. Other batteries could burst, causing personal injury and damage.
Never attempt to charge non-rechargeable batteries.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorized BLACK+DECKER Service Centre to avoid a hazard.
Do not expose the charger to water.
Do not open the charger.
Do not probe the charger.
The appliance/battery must be placed in a well-ventilated area when charging.

Electrical safety

Symbols on the charger

Read all of this manual carefully before using the appliance.
This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.
The charging base is intended for indoor use only.

Labels on appliance
The following symbols appear on this appliance along with the date code

Read all of this manual carefully before using the appliance
BHFEV182B, BHFEV182C, BHFEV182CP use charger S0102400040 / SSC-250040

Features
This tool includes some or all of the following features. $BLACK-DECKER- BHFEV182B-Cordless-Hand-And-Stick-Vacuum-Cleaner-FIG- $3$$

On/Off button
3 speed power switch
Beater bar activation button
State of charge indicator
Filter sense
18V Battery (available with units BHFEV182C, BHFEV182CP, BHFEV1825C, BHFEV1825CP)
18V cup charger and charging station (available with units BHFEV182C, BHFEV182CP, BHFEV1825C, BHFEV1825CP)
Lift away dust canister with filter agitator
Dust canister door
Floor head
Extension tube
2 in 1 Accesssory tool (available to order through the service department)
Crevice tool (available with units BHFEV182B, BHFEV182C, BHFEV182CP, BHFEV1825C, BHFEV1825CP)
Accessory storage clip
Pet hair tool (available with units BHFEV182CP, BHFEV1825CP)
Wide mouth dust brush (available to order through the service department)
Charge port

Charging a Battery

BLACK+DECKER chargers are designed to charge BLACK+DECKER battery packs.
Note : To ensure maximum performance and life of lithium-ion battery packs:

Charge the battery pack fully before first use.
Recharge discharged batteries as soon as possible after every use.
Do not discharge batteries fully.
The supplied charger offers three possible ways to charge your battery.

Standard cup charging only
Wall-mounted cup charging
Wall-mounted suspended charging

Standard cup charging (Fig. A) $BLACK-DECKER-BHFEV182B-Cordless-Hand-And- Stick-Vacuum-Cleaner-FIG- $4$$

Plug the charger (5) into an appropriate outlet before inserting the battery pack (4).
Insert the battery pack into the cup charger.
When using the the cup charger a green LED will flash indicating that the battery is being charged.
The completion of charge is indicated by the green LED remaining on continuously. The pack is fully charged and may be used at this time or left on the charger.
The cup charger can be inserted into the charging station (5a) as shown in figure A.

Wall-mounted battery charging

Mark the location of the charging station (5a) screw holes on the wall (within reach of an electrical outlet) for charging the vacuum while it is on the charging station.3
Fix the charging station (5a) to the wall using appropriate screws and plugs for the type of wall, and weight of the appliance.
Install the cup charger (5) into the charging station (5a). Ensure it is locked into place before proceeding.
Note : To remove the cup charger from the charging base pull out on the retaining tabs and lift the cup charger out.
Plug the charger into an appropriate outlet before inserting the battery pack.
Slide the battery pack onto the charging station

Wall-mounted vacuum storage and battery charging

The product can be attached to a wall to provide a convenient storage and charging point for the appliance. When mounting to a wall, make sure the mounting method is suitable for the wall type and is appropriate to the weight of the appliance.

Mark the location of the charging station screw holes on the wall (within reach of an electrical outlet for charging the vacuum while it is on the charging station.
Fix the charging station to the wall using appropriate screws and plugs for the type of wall, and weight of the appliance.
Install the cup charger into the charging station. Ensure it is locked into place before proceeding.
Note : To remove the cup charger from the charging base pull out on the retaining tabs and lift the cup charger out.
Plug the charger into an appropriate outlet.
With the battery installed on the vacuum, slide the charge port (15), located on the vacuum base, onto the rails of the charging station (5a).
The white LED (3) on the vacuum will flash indicating that the battery is being charged.
The LED sections increase as the battery is charged – when fully charged the LEDS go out. The pack is fully charged and may be used at this time or left on the charger

Leaving the battery in the charger
The charger and battery pack can be left connected with the green LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

To install battery pack (fig. B)

Insert battery (4) into tool until an audible click is heard as shown in figure B.
Ensure battery pack is fully seated and fully latched into position.

To remove battery pack
Depress the battery release button and pull battery pack (4) out of the tool.

Assembly (Fig. C)

Align the top of the extension tube (9) with the vacuum inlet (16) as shown in figure C.
Push the extension tube (9) onto the vacuum inlet (16) soit locks into position.
Align the bottom of the extension tube (9) with the floor head (8) as shown in figure C.
Push the bottom of the extension tube (9) onto the floor head (8) so it locks into position.
To remove an accessory, press the accessory release latch located on the accessory and pull it off

USE
This vacuum cleaner can be used in one of four ways.

With the extension tube (9) and the floor brush (8) as shown in figure C.
With the floor brush (8) and the vacuum inlet (16) as shown in figure D.
With the extension tube (9) and an accesssory tool (10), (11), (13) or (14) as shown in figure E.
With an accesssory tool (10), (11), (13) or (14) and the vacuum inlet (16) as shown in figure E.
Accessories not supplied with your unit can be ordered through service department.

Switching ON and OFF (Fig. F) $BLACK-DECKER-BHFEV182B-Cordless-Hand-And- Stick-Vacuum-Cleaner-FIG- $5$$

To switch ON, press the On/Off button (1).
For increased power, slide the variable power switch (2) forward.
Note : The floor brush (8) will power on when it is attached to the vacuum or extension tube (it can be switched off by pressing the button 2a on the display). The LED worklights on the front of the floor head will illuminate whenever the beater bar activation button (2a) is switched ON (they can be switched off by pressing the button again).

Note : The state of charge indicator LEDs (3) will illuminate while the vacuum is ON or during the charging process.

To switch OFF, press the On/Off button (1).
Return the product to the charger immediately after use so that it will be ready and fully charged for the next use. Ensure that the product is fully engaged with the charger plug.

Using an Accessory tool (Fig. G)
Your vacuum may come with some of the following tools.

2 in 1 Accesssory tool (10)
Crevice tool (11).
Pet hair tool (13).
Wide mouth dust brush (14).
The accessory tool (10), (11), (13) or (14) can be fitted either directly to the extension tube ( 6 ) or to the vacuum inlet (5) as shown in Fig. J.
Align the top of the accessory tool (10), (11), (13) or (14) with the vacuum inlet (16) or extension tube connection (9a) and push into place so it locks into position as shown in figure G.

All available through service department

Cleaning and emptying the vacuum

Filter sense
Whenever a filter is Blocked and needs cleaning, the red filter LED (3) in the chassis will illuminate.

Filter agitator (Fig. H)

With the lift away dust canister (6) off the chassis (17) , rotate the filter agitator wheel 5 – 10 times to remove excessive dust from the filter thus increasing its performance.
Note : It is recommended that you agitate when the unit is emptied and the prefilter removed.
Note : Maximum dust collection will only be obtained with clean filters and an empty dust canister.
If dust begins to fall back out of the product after it is switched off, this indicates that the dust canister is full and requires emptying.

To empty the dust canister (Fig. I, J)

Lift and remove the lift away dust canister (6) from thechassis (17) as shown in figure I.
Place the dust canister over a dust bin and press the dust canister lid release button (6a) to empty the dust canister as shown in figure J.
Close the dust canister lid (7), until it “clicks” firmly into position.
Install the lift away dust canister (6) back onto the chassis (17).

Removing pre-filter (Fig. K)

Lift and remove the lift away dust canister (6) from the chassis (17) as shown in figure I.
Place the dust canister over a trash bin and press the dust canister lid release button (6a) to empty the dust canister as shown in figure J.
Use your index finger and thumb to pinch the pre-filter(18), pull the pre-filter (18 ) from the dust canister (6) as shown in figure K.
Note : The filter housing fits snuggly in the dust canister and may be difficult to remove at first
Empty the dust canister.
Install the pre-filter (18) into the dust canister (6) ensuring the dust canister tab (20) aligns with the prefilter slot (19) as shown in figure K.
Install the dust canister onto the vacuum, until it “clicks” firmly into position

Removing filter (Fig. L) $BLACK-DECKER-BHFEV182B-Cordless-Hand-And-Stick- Vacuum-Cleaner-FIG- $6$$

Lift and remove the lift away dust canister (6) from the chassis (17) as shown in figure I.
Place the dust canister over a trash bin and press the dust canister lid release button (6a) to empty the dust canister as shown in figure J.
Grasp the agitator wheel housing (21) and pull up to remove.
Remove the filter (22), from the agitator wheel housing (21) as shown in figure L.
Shake off or lightly brush any loose dust from the filter.
Install the the filter (22), into the agitator wheel housing (21).
Install the agitator wheel housing (21) onto the dust canister, until it “clicks” firmly into position.

Cleaning the filters

Once the filter and pre-filter are removed from the dust canister shake off or lightly brush any loose dust from the pre-filter and filter.
Rinse out the dust canister (6) with warm soapy water.
Wash the filters with warm soapy water.
Ensure the filters are completely dry (24 hrs) before refitting.
Follow the instructions in the “Removing pre-filter and Removing filter” sections for assembly instructions.
Note : Maximum dust collection will only be obtained with clean filters and an empty dust canister. If dust begins to fall back out of the product after it is switched off, this indicates that the dust canister is full and requires emptying or that there is a blockage somewhere.
Wash the filters regularly using warm, soapy water and ensure that it is completely dry before using again. The cleaner the filter is, the better the product will perform.
The filters must be completely dry and correctly in position before use.

Removing and clearing the rotary brushes (Fig. M)
Warning! To reduce the risk of injury from moving parts, disconnect battery before cleaning or servicing.

To remove the rotary brush (23) from the floor head (8) depress the release button (24) as shown in figure M.
Lift the rotary brush from its locked position.
The rotary brush (23) can now be removed.
Clean the rotary brush, and reinstall. Ensure it is secured in its locked position before operating.

Storage
The unit can be safely stored using the charging station (5a) as shown in figure N.

Maintenance

Your BLACK+DECKER cordless appliance has been designed to operate over a long period with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless appliances:

Remove the battery.
Unplug the charger before cleaning it. Your charger does not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/ charger using a soft brush or dry cloth.
Regularly clean the motor housing, using a damp cloth. Do not use any abrasive or solvent-based cleaner.

Replacing the filters
The filters should be replaced every 6 to 9 months and whenever worn or damaged.
Replacement filters are available from your BLACK+DECKER dealer.

Remove the old filters as described above.
Fit the new filters as described above.

Trouble shooting

Problem	Possible Cause	Possible solution

Unit will not start.

| Battery pack not charged.| Check battery pack charging requirements.

Blockage.

| Check floorhead tube.
Check extension tube.
Check between exten- sion tube and bowl

Beater bar stops working.

| ****

Obstruction.

| The unit is equipped with a beater bar over- load protection feature. Remove and clean the beater bar of all debris and obstructions

Battery pack will not charge.

| ****

Charger not plugged in.

| Plug charger into a working outlet. Refer to Important Charging Notes for more details.
Surrounding air temperature too hot or too cold| Move charger and battery pack to a

4 °C or below +40 °C.

Protecting the environment

Separate collection. Products and batteries marked with this symbol must not be disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled reducing the demand for raw materials. Please recycle electrical products and batteries according to local provisions. Further information is available at www.2helpU.com

Technical Data

	BHFEV182B*	BHFEV182C	BHFEV182CP
Voltage	18	18	18
Watt Hours		36	36
Weight	2.8	3.17	3.23
Battery		BL2018	BL2018
Charger	S0102400040 / SSC-250040	S0102400040 / SSC-250040

S010**2400040

/ SSC-250040**

Approx charge time| | 5h| 5h
| BHFEV1825C| BHFEV1825CP
---|---|---
Voltage| 18| 18
Watt Hours| 45| 45
Weight| 3.23| 3.23
Battery| BL2518| BL2518
Charger| S0102400040 / SSC- 250040| S0102400040 / SSC-250040
Approx charge time| 7.5h| 7.5h

BHFEV182B is a bare unit and does not come supplied with a battery or a charger.

Guarantee

Black & Decker is confident of the quality of its products and offers consumers a 24-month guarantee from the date of purchase. This guarantee is in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
To claim on the guarantee, the claim must be by Black&Decker Terms and Conditions and you will need to submit proof of purchase to the seller or an authorized repair agent.
Terms and conditions of the Black&Decker 2 year guarantee and the location of your nearest authorized repair agent can be obtained on the Internet at www.2helpU.com, or by contacting your local Black & Decker office at the address indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and receive updates on new products and special offers

Tel. +971 4 8863030
Fax +971 4 8863333
Black & Decker 270 Bath RoadSlough, Berkshire SL1 4DX
Middle East & Africa
www.blackanddecker.ae
service.mea@sbdinc.com
United Kingdom & Republic Of Ireland
www.blackanddecker.co.uk
emeaservice@sbdinc.com

België/Belgique/Luxembourg| Stanley Black & Decker Belgium BVBA| Tel. NL| +32 15 47 37 65
---|---|---|---
www.blackanddecker.be| Egide Walschaertsstraat 16| Tel. FR| +32 15 47 37 66
enduser .be@sbdinc.com| 2800 Mechelen| Fax.| +32 15 47 37 99
Danmark| Black & Decker Roskildevej 22

2620 Albertslund

| kundeservice.dk@sbdinc.com www.blackanddecker.dk
Deutschland| Stanley Black & Decker Deutschland Gmbh| Tel. 06126 21-0
www.blackanddecker.de infobfge@sdbinc.com| Black & Decker Str. 40, D – 65510 Idstein| Fax 06126 21-2980
Ελλάδα| Stanley Black & Decker (ΕΛΛΑΣ) Ε.Π.Ε| Τηλ. 210-8981616
www.blackanddecker.gr

greece.service@sbdinc.com

| ΓΡΑΦΕΙΑ:Στράβωνος 7 & Βουλιαγμένης 166 74 Γλυφάδα – Αθήνα| Φαξ 210-8983570
SERVICE:| Ημερος Τόπος 2 -Χάνι Αδάμ 193 00 Ασπρόπυργος – Αθήνα| Τηλ. Service 210-8985208

Φαξ 210-5597598

España| Stanley Black & Decker Ibérica, S.C.A.| Tel. 934 797 400
www.blackanddecker.es

respuesta.posventa@sbdinc.co

| Parc de Negocis “Mas Blau”

Edificio Muntadas, c/Bergadá, 1, Of. A6 08820 El Prat de Llobregat (Barcelona)

| Fax 934 797 419
France| Black & Decker (France) S.A.S.| Tel. 04 72 20 39 20
www.blackanddecker.fr| 5 allée des Hêtres

B.P. 30084

69579 Limonest Cédex

enduser .nl@sbdinc.com

| Holtum Noordweg 35, 6121 RE BORN

Postbus 83, 6120 AB BORN

| Fax +31 164 283 200
Norge| Black & Decker Postboks 4613, Nydalen

0405 Oslo

| kundeservice.no@sbdinc.com www.blackanddecker.no
Österreich| Stanley Black & Decker Austria GmbH| Tel.               01 66116-0
www.blackanddecker.at service.austria@sbdinc.com| Oberlaaerstraße 248, A-1230 Wien| Fax               01 66116-614
Portugal| Black & Decker Limited SARL| Tel.               214667500
www.blackanddecker.pt resposta.posvenda@sbdinc.com| Quinta da Fonte – Edifício Q55 D. Diniz

Rua dos Malhões, 2 e 2A – Piso 2 Esquerdo 2770 – 071 Paço de Arcos

| Fax 214667580
Suomi| Black & Decker PL47

00521, Helsinki

| asiakaspalvelu.fi@sbdinc.com www.blackanddecker.fi
Sverige| Black & Decker AB

Box 94, 431 22 Mölndal

| kundservice.se@sbdinc.com www.blackanddecker.se
Türkiye| STANLEY BLACK & DECKER TURKEY ALET| Tel. +90 216 665 29 00
www.blackanddecker.com.tr| ÜRETİM SAN TİC. LTD. ŞTİ. AND Kozyatağı

– İçerenköy Mah. Umut Sok. AND Ofis. Sit. No: 10-12/82-83-84 Ataşehir/İstanbul

| Fax. +90 216 665 29 01

info-tr@sbdinc.com

United Kingdom &| Black & Decker| Tel. 01753 511234
Republic Of Irelandwww.blackanddecker.co.uk emeaservice@sbdinc.com| 270 Bath Road

Slough, Berkshire SL1 4DX

| Fax 01753 512365
Middle East & Africa| Black & Decker| Tel. +971 4 8863030
www.blackanddecker.ae

service.mea@sbdinc.com

| P.O.Box – 17164

Jebel Ali Free Zone (South), Dubai,

UAE

| Fax +971 4 8863333
N909304 REV-0| | 03/2021

www.blackanddecker.eu