westfalia 960809 18 V Li-Ion Battery Powered Belt Sander WABF18 User Manual
- June 9, 2024
- Westfalia
Table of Contents
18 V Li-Ion Battery Powered Belt Sander WABF18
Art. 96 08 09
Original Instructions
- Battery Bay
- Power switch
- Sanding belt
- Tensioner
- Vacuum adaptor
- Clamping screw
- Drive wheel
- Release button of the tensioner
Dear Customers,
Instruction manuals provide valuable hints for using your new device. They
enable you to use all functions, and they help you avoid misunderstandings and
prevent damage. Please take the time to read this manual carefully and keep it
for future reference.
1 Unbox device
2 Insert the battery*
3 Swivelling the grinding arm
4 Switch on the device
5 Dismounting the vacuum adapter
6 Replacing and tensioning the sanding belt
* Not included
TECHNICAL DATA
Nominal speed 460 m/min
Dimensions 430 x 80 x 90 mm
Weight (Device) approx. 800 g
Belt Dimensions 13 x 457 mm
∅ Vacuum Adaptor 36 mm
Battery voltage 18 V
SAFETY NOTES
Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury.
Please also observe the safety notes in the manuals for battery and charger.
- Please read this manual carefully and use the unit only according to this manual.
- When using the tool, use safety equipment including safety glasses and ear protection. If operating the tool causes discomfort in any way, stop immediately and review your method of use.
- Dispose of used packaging material carefully or store it out of the reach of children. There is a danger of suffocation!
- Persons with limited physical, sensorial or mental abilities are not allowed to use the unit, unless they are supervised and briefed for their safety by a qualified person.
- Only use the appliance for dry sanding. Do not work on damp materials or damp surfaces. The sander is not suitable for wet sanding. Do not use the appliance for any other purpose.
- Always wear protective goggles and a dust mask when sanding. Wear suitable clothing. Take off jewellery and tie up long hair before working. Wear ear protection.
- Use the dust extraction adapter for all sanding work, especially when working on materials that produce dust that is hazardous to health.
- Ensure adequate ventilation when working on plastics, paints, varnishes, etc. Materials containing asbestos must not be processed. Harmful/toxic dusts are produced when sanding e.g. lead-containing paints, some types of wood and metals. Dust and chips produced can be hazardous to health, flammable or explosive. Take suitable protective measures.
- Secure the workpiece against slipping away.
- Always hold the tool firmly on the insulated gripping surface during work.
- Always guide the tool switched on against the workpiece. Lift the unit off the workpiece after machining and only then switch it off.
- Always remove the battery from the unit during breaks, before carrying out any work on the unit (e.g. changing the abrasive belt) and when not in use.
- The unit is designed for use up to 2000 m above sea level.
- Do not use the unit if it is not working correctly or has been damaged by falling. Do not disassemble the unit or attempt to repair it yourself.
- Periodically check all nuts, bolts and other fixings and tighten where necessary.
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
| Batteries do not belong in the household garbage.
For battery disposal please check with your local council.| 
---|---|---
EC DECLARATION OF CONFORMITY
We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen,
declare by our own responsibility that the product
18 V Li-Ion Battery Powered Belt Sander WABF18
Article No. 96 08 09
is according to the basic requirements, which are defined in the European Directives and their amendments.
2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and
electronic Equipment (RoHS)
2006/42/EC
Machinery
EN 62745-2-4:2009+A11
2014/30/EU
Electromagnetic Compatibility (EMC)
EN 55014-1:2017+A1, EN 55014-2:1997+A1+A2+AC
The technical documentations are on file at the QA department of the Westfalia Werkzeug company.
Hagen, 30th of March, 2022
Thomas Klingbeil,
QA Representative
CUSTOMER SERVICES
DEUTSCHLAND
Westfalia
Werkzeugstraße 1
D-58093 Hagen
Telefon: (0180) 5 30 31 32
Telefax: (0180) 5 30 31 30
Internet: www.westfalia.de
SCHWEIZ
Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch
ÖSTERREICH
Westfalia
Moosham 31
A-4943 Geinberg OÖ
Telefon: (07723) 4 27 59 54
Telefax: (07723) 4 27 59 23
Internet: www.westfalia-versand.at
DISPOSAL
Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in
mind that many of its components consist of valuable materials, which can be
recycled. Please do not discharge it in the rubbish bin, but check with your
local council for recycling facilities in your area.
Gestaltung urheberrechtlich geschützt ©Westfalia 3/22
References
- Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
- Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
- Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr