DIGITUS DS-33003 PCI Serial Interface Card Installation Guide

June 4, 2024
DIGITUS

DIGITUS - logo

DS-33003 PCI Serial Interface Card
Installation GuideDIGITUS DS-33003 PCI Serial Interface
Card

Features and Benefits

  • Compliant with PCI Local Bus Specification, Revision 2.3
  • Supports 2x UART serial ports
  • Easy Plug and Play
  • Automatically selects IRQ & I/O address
  • Built-in 16C450/550 compatible UART
  • On-chip 256-byte FIFOs in transmit and receive path of each serial port
  • Serial data transfer rate up to 115200bps
  • Bus PCI 32-bit
  • Connectors 2x DB9 male serial connectors

System Requirements

  • Windows®10/8/7/Vista/XP/2000, Linux
  • Available PCI slot

Package Contents

  • 1 x 2-Port Serial PCI Card
  • 1 x Driver CD
  • 1 x User’s Manual

Hardware Installation

  1. Turn Off the power to your computer.
  2. Unplug the power cord and remove your computer’s cover.
  3. Remove the slot bracket from an available PCI slot.
  4. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly. Replace the slot bracket’s holding screw to secure the card.

Replace the computer cover and reconnect the power cord.

Driver Installation

For Windows®

  1. Don’t insert the PCI card into the PCI slot.
  2. Select CD ROM: \PCI setup.exe
  3. Press the “Install” button to install the drivers.
  4. Click the “Exit” button to complete the driver installation.
  5. Shut down the PC.
  6. Place the PCI card into the PCI slot then power on the system.
  7. Once the system gets booted Windows will automatically start installing the device driver software.

To Verify Windows® Driver Installation
Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. You should see two
High-Speed PCI Serial Port … installed under Ports (COM & LPT) item. Hereby ASSMANN Electronic GmbH declares that this device is in compliance with the requirements of Directive 2014/30/EU and Directive 2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested by post under the below-mentioned manufacturer address.

Warning:
This device is a class B product. This equipment may cause some radio interference in the living environment. In this case, the user can be requested to undertake appropriate measures to prevent interference.

www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid Germany

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals