aivituvin AIR06-B Outdoor Rabbit Hutch Instruction Manual
- June 9, 2024
- aivituvin
Table of Contents
aivituvin AIR06-B Outdoor Rabbit Hutch
NOTICE
Please retain these instructions for future reference.
- Firmly secure all bolts,screws and knobs before use.
- Reconfirm that all bolts,screws,and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- Be aware that moving parts can injure,crush and cut.
- If any parts are missing,broken,damaged,or worn,stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’ s instructions as this could void the product warranty.
TOOLS REQUIRED
HARDWARE
PARTS
PRODUCT ASSEMBLY
INSTALLATION INSTRUCTION
- Attach back panel up Part H and down Part E by P4x4. Screw the ramp suppor Part R to the down Part E by P8x2 according to the predrill screw holes.
- Attach two side panel Part A and Part B to the whole back panel by P2x10.
- Attach the wooden feeder Part L, M and Part N by P3x4.
- Screw the wooden feeder into Part C from inner by P2x2.
- Attach the front panels Part C and Part D to the sides by P1x8.
- Put down supporting bars 2pcs of Part F.
- Screw the ramp Part J to the supporting bars by P5x2.
- Slide in the middle tray Part K and bottom tray Part O.
- Put in the divider Part G as show on picture. Put in the chewing toy P7 in the cage wherver you want.
- Screw two casters without brake Part P to the front of hutch legs by P3x4 each.
- Screw two brake casters Part Q to the back of hutch legs by P3x4 each.
- Attach the roof Part I to the back panel of hutch by P5x6.
- Screw the roof hinge P6 to connect the roof and side panel by P5x4 each side.
References
Read User Manual Online (PDF format)
Loading......