westfalia 859193 Electric Grain Mill Instruction Manual

westfalia 859193 Electric Grain Mill

Original Instructions

Feed Mill
Article No. 85 91 93

Dear Customers
Instruction manuals provide valuable hints for using your new device.
They enable you using all functions, and they help you avoiding misunderstandings and preventing damage.
Please take the time to read this manual carefully and keep it for future reference.

Overview

Safety Notes

Please mind the following safety notes to avoid malfunction, damages or physical injuries:

• Read and understand the safety instructions of the manual. Do not operate the feed mill if you have not understood the manual.
• Make sure the operating voltage stated on the type label corresponds to the power mains available in your area.
• Persons with limited physical, sensorial or mental abilities are not allowed to use the unit, unless they are supervised and briefed for their safety by a qualified person.
• The unit is not a toy and does not belong in the hands of children. Never leave the unit unsupervised when in use. Keep it out of reach of children or persons in need of supervision. Children should be supervised to ensure that they do not play with the unit.
• The unit is not intended for continuous professional operation. The unit is intended to be used in closed rooms only and in similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments. The use in any other way is not considered as intended use.
• Wear hearing protection during operation.
• Use the feed mill according to this manual and only for the intended application, for grinding grist, pulses and other ingredients for animal feed.
• Do not mill any other items, ingredients or hazardous materials in the feed mill.
• Never operate the feed mill without ingredients.
• Keep all parts of the feed mill and the work area clean.
• Only operate the feed mill on a firm and safe ground.
• Operate the feed mill only under supervision.
• Check the feed mill and the electrical connections for damage and do not use the feed mill, if the motor or the cable is damaged.
• Ensure that the feed mill is switched off before disconnecting the power plug from the wall outlet.
• Do not use the feed mill when your reactivity is affected by alcohol consumption, medication, drugs, illness or tiredness.
• Do not move or transport the feed mill while operation.
• Do not expose the feed mill to moisture and do not immerse the feed mill in water or other liquids.
• Keep the feed mill away from potentially explosive locations.
• Consider the slow-down time of the feed mill after switching off.
• Check the feed mill and the electrical connections for any damage and do not use the tool if the feed mill or the cable is damaged.
• Switch off the feed mill when the unit is not in use, after finishing work and before undertaking maintenance and then disconnect the power cord from the mains supply.
• In the event of an electrical or mechanical malfunction, immediately switch off the feed mill and do not use it further.
• Do not carry the feed mill by the power cord. Keep the power cord away from hot, sharp edges and moving parts.
• Do not wear jewellery and loose clothing. Tie up long hair.
• Do not disassemble the feed mill and do not try to repair it yourself. Have the unit repaired by a professional or contact our customer support service. Always use original replacement parts.
• The unit is intended for use up to 2000 m above sea level.

Operation

Setting-up the Feed Mill

• Select a suitable and dry work place for operating the feed mill. Only operate the feed mill on a hard and level ground.
• Make sure the feed mill is positioned at a sufficient distance from walls and other objects during operation.
• Keep the feed mill dry at any time. The ambient working temperature should be from 0 – 40° C.
• Carefully unpack the feed mill and keep packaging materials out of range of children. There is danger of suffocation!

Hints

• Only use pure grist for milling without dirt and stones. Otherwise the grinder might be damaged.
• Do not operate the feed mill when empty.
• Only mill dry grist.
• Do not mill already milled animal food a second time.

Safety Switches

Attention! The motor unit is equipped with two contact safety switches.
If the contact safety switches are not fully pressed down, the motor will not start up.
The safety switches are fully pressed down when the wing screws of the sieve are tightly screwed on the unit.

Make sure the contact safety switches are not blocked by dust and dirt. If necessary clean the safety switched before use.

Assembling and Operating

1. Turn the motor unit (3) upside down and mount the desired mash (6, 7 or 8) on the motor unit by using the wing screws.
   Simultaneously screw the wing screws on the unit and make sure the wing screws are tightly fastened. By doing this the contact safety switches will be fully pressed down.

2. Now turn around the motor unit and place the motor unit on the collecting bin (5).

3. Lock both parts together with the quick locks (4).

4. Place the filling bin (1) on the motor unit. Lock the filling bin with the included mounting material (washer, retainer ring, wing nut).

5. Fill the grist into the filling bin and cover the filling bin with the dust cover, in order to avoid spilling during operation.

6. Insert the power plug into a wall socket and press the ON/OFF switch (2) to switch on the feed mill. During operation wear hearing protection.
   If the motor does not function, please check if the wing screws are tightly screwed on the unit, so the contact safety switches are activated.

7. After finishing work switch off the motor unit and remove the milled animal food.
   Consider the slow-down time of the motor unit after switching off.

Cleaning

• First unplug the power plug before cleaning the feed mill.
• Always clean all parts of the feed mill after each use and before each operation.
• Do not clean the feed mill with water or aggressive cleaner but only with a dry cloth resp. a damp cloth or a soft brush.
• Store the feed mill in a dry place and protect it from dust and dirt. Keep it away from direct sunlight.
• Keep the feed mill out of reach of children and persons in need of supervision.

Technical Data

Milling Capacity 1,5 mm Mesh
3,0 mm Mesh
4,0 mm Mesh|

70 kg/h
130 kg/h
180 kg/h

Degree of Protection| IPX3

EU Declaration of Conformity

We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen,
declare by our own responsibility that the product
Feed Mill
Article No. 85 91 93
is according to the basic requirements, which are defined in the European Directives and their amendments.

• 2014/30/EU
  • Electromagnetic Compatibility (EMC)
  • EN 55014-1:2017+A11, EN 55014-2:1997+AC+A1+A2,
  • EN 61000-3-2:2014, EN 61000-3-3:2013
• 2006/42/EC
  • Machinery
  • EN 60335-1:2012+AC+A11+A13+A1+A14+A2+A15,
  • EN 62233:2008+AC
• 2011/65/EU
  • Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)

The technical documentations are on file at the QA department of the Westfalia Werkzeug-company.
Hagen, 07th of April, 2022

Thomas Klingbeil,
QA Representative

Customer Services
Deutschland
Westfalia
Werkzeugstraße 1
D-58093 Hagen
Telefon: (0180) 5 30 31 32
Telefax: (0180) 5 30 31 30
Internet: www.westfalia.de

Schweiz
Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch

Österreich
Westfalia
Moosham 31
A-4943 Geinberg OÖ
Telefon: (07723) 4 27 59 54
Telefax: (07723) 4 27 59 23
Internet: www.westfalia-versand.at

Disposal

Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled.
Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.

References

• Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>