TERADEK Bolt 4K LT HDMI Wireless Video Receiver Owner’s Manual

TERADEK Bolt 4K LT HDMI Wireless Video Receiver

6GHz Mode is only legal in certain regions See the latest regions to support 6 GHz here

What you need to Upgrade:

• 7x New 6GHz Antennas (2dBi 4.9-7.3Ghz RP-SMA)
• The latest Bolt 4K LT HDMI Firmware Free Download Here

Upgrade Process

STEP 1

1. Install new Antennas
2. Download Bolt Manager for Mac or PC
3. Connect your Bolt 4K LT HDMI TX via USB-C (Thunderbolt cable will not work)
4. Get the latest Bolt 4K firmware
5. Install all three FW versions
6. Repeat process for Bolt 4K LT HDMI RX

STEP 2

Your TX and RX should now have 6GHz mode. The default will still be 5GHz mode. There are two ways to enable 6GHz Mode. You will need to enable it on both the TX and RX (this is not automatic between the two).

1. On-Device Display: Main Menu > Wireless Settings > Band > 6GHz
2. Bolt Manager App (iOS and Android): Status / Configuration > Select Unit > Menu (three dots in the top right of the app) > Wireless Settings > Band > 6GHz

You will also need to pair all RX units again after switching to 6GHz mode.

Now you are ready to use the new 6GHz spectrum. Check out the Spectrum Analyzer in the Bolt Manager App (iOS and Android) to see what frequencies may have interference in your area!

• If you have gone through this process and still do not see 6GHz Mode, but believe you are in a region where 6 GHz is legal, please contact Teradek’s Support Team to request a region change.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>