theben SYN 169 s Time Switch Instruction Manual
- June 9, 2024
- theben
Table of Contents
theben SYN 169 s Time Switch
MOUNTING INSTRUCTIONS
Safety information: Electrical devices should only be connected and mounted by an electrical specialist. Manipulations and modifications on the switch will result in loss of warranty. The national specifications and appli- cable safety regulations must be observed.
SYN 169 s
230 V / 50 Hz
SUL 189 s
Quartz * R = 3d (72h) 230 V / 45 – 60 Hz
Theben AG
Hohenbergstraße 32
72401 Haigerloch
Deutschland
Fon +49 (0) 74 74 / 6 92-0
Fax +49 (0) 74 74 / 6 92-150
Service
Fon +49 (0) 74 74 / 6 92-369
Fax +49 (0) 74 74 / 6 92-207 hotline@theben.de
Adresses, telephone numbers etc. at www.theben.de
24 h-Programm
Programm auto
Manual Control ON/OFF (Override Control)
Turn the control axis ❶ in direction of arrow by one notch; ON= or OFF = The manual control is automatically annuled by the following counteracting command of the automatic program sequence.
Programm permanent ON / OFF
Permanent Control ON/OFF
Set the hand lever ❷ to »perm« = permanent control; turning the control axis ❶ in direc-tion of arrow, the required permanent control ON or OFF can now be adjusted. Turning the hand lever to »Auto« = Automatic Control, the permanent control is terminated. The actual switch position is maintained until the next counteracting command of the auto-matic program sequence is triggered. An immediate correction can be carried out by means of the manual control (override control).
EMV / CEM / EMC / ETY
The time switches are in accordance with the European directives 73/23/EEC. (Low-Vol-tage Directive) and 89/336/EEC (EMC-Directive). If the time switches are used together with other devices in an installation, take care that the complete installation does not cause a radio interference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>