KERN CFS-A03 Signal Lamp Instructions

: June 9, 2024
: KERN

Table of Contents

KERN CFS-A03 Signal Lamp
BALANCES & TEST SERVICE 2023
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KERN CFS-A03 Signal Lamp

KERN CFS-A03 Signal Lamp product Signal lamp
KERN CFS-A03
Signal lamp for visual support of weighing with tolerance range. Three-colour LED, red, green, yellow. Power supply via balance using RS-232. Total dimensions W×D×H 100×180×300 mm
Suitable for series BFB, BFN, BID, CKE, CPB-N, GAB-N, GAB-P, IFB, IFS, IOC, KFB-TM,
KFN-TM, KIB-TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN

BALANCES & TEST SERVICE 2023

KERN PICTOGRAMS

Internal adjusting:
Quick setting up of the balance‘s accuracy with internal adjusting weight (motor driven)
Adjusting program CAL:
For quick setting up of the balance‘s accuracy. External adjusting weight required
Easy Touch:
Suitable for the connection, data transmission and control through PC or tablet.
Memory:
Balance memory capacity, e.g. for article data, weighing data, tare weights, PLU etc.
Alibi memory:
Secure, electronic archiving of weighing results, complying with the 2014/31/EU standard.
KERN Universal Port (KUP):
allows the connection of external KUP interface adapters, e.g. RS-232, RS-485, SB, Bluetooth, WLAN, Analogue, Ethernet etc. for the exchange of data and control commands, without installation effort
Data interface RS-232:
To connect the balance to a printer, PC or network
RS-485 data interface:
To connect the balance to a printer, PC or other peripherals. Suitable for data transfer over large distances. Network in bus topology is possible
USB data interface:
To connect the balance to a printer, PC or other peripherals
*Bluetooth data interface:**
To transfer data from the balance to a printer, PC or other peripherals
WiFi data interface:
To transfer data from the balance to a printer, PC or other peripherals
Control outputs (optocoupler, digital I/O):
To connect relays, signal lamps, valves, etc.
Analogue interface:
to connect a suitable peripheral device for analogue processing of the measurements
Interface for second balance:
For direct connection of a second balance
Network interface:
For connecting the scale to an Ethernet network KERN Communication Protocol (KCP): It is a standardized interface command set for KERN balances and other instruments, which allows retrieving and controlling all relevant parameters and functions of the device. KERN devices featuring KCP are thus easily integrated with computers, industrial controllers and other digital systems
GLP/ISO log:
The balance displays weight, date and time, independent of a printer connection
GLP/ISO log:
With weight, date and time. Only with KERN printers.
Piece counting:
Reference quantities selectable.
Display can be switched from piece to weight
Recipe level A:
The weights of the recipe ingredients can be added together and the total weight of the recipe can be printed out
Recipe level B:
Internal memory for complete recipes with name and target value of the recipe ingredients. User guidance through display
Totalizing level A:
The weights of similar items can be added together and the total can be printed out
Percentage determination: Determining the deviation in % from the target value (100 %)
Weighing units:
Can be switched to e.g. nonmetric units. See balance model. Please refer to KERN‘s website for more details
Weighing with tolerance range:
(Check weighing) Upper and lower limiting can be programmed individually, e.g. for sorting and dosing. The process is supported by an audible or visual signal, see the relevant model
Hold function:
(Animal weighing program) When the weighing conditions are un stable, a stable weight is calculated as an average value
Protection against dust and water splashes IPxx:
The type of protection is shown in the pictogram.
Suspended weighing:
Load support with hook on the underside of the balance
Battery operation:
Ready for battery operation. The battery type is specified for each device
Rechargeable battery pack: Rechargeable set
Universal plug-in power supply:
with universal input and optional input socket adapters for
- EU, CH, GB
- EU, CH, GB, USA
- EU, CH, GB, USA, AUS
Plug-in power supply:
230V/50Hz in standard version for EU, CH. On request GB, USA or AUS version available
Integrated power supply unit:
Integrated in balance. 230V/50Hz standard EU. More standards e.g. GB, USA or AUS on request
Weighing principle: Strain gauges Electrical resistor on an elastic deforming body
Weighing principle: Tuning fork
A resonating body is electromagnetically excited, causing it to oscillate
Weighing principle: Electromagnetic force compensation
Coil inside a permanent magnet.
For the most accurate weighing’s
Weighing principle: Single cell technology:
Advanced version of the force compensation principle with the highest level of precision
Verification possible:
The time required for verification is specified in the pictogram
Dark’s calibration possible (DKD):
The time required for Dark’s calibration is shown in days in the pictogram
Factory calibration (ISO):
The time required for Factory calibration is shown in days in the pictogram
Package shipment:
The time required for internal shipping preparations is shown in days in the pictogram
Pallet shipment:
The time required for internal shipping preparations is shown in days in the pictogram