CENTSYS CP84SM Charger Manual Insert User Manual
- June 4, 2024
- CENTSYS
Table of Contents
CP84SM charger manual insert
The CP84SM is a switch-mode charging unit with an output of between 1A and 2.2A (dependent on input voltage) used to provide a stable charge to batteries used in D5-Evo gate motors and SECTOR II traffic barrier.
**** Important Safety Instructions
- Do not install this product near any sensitive electrical components.
- All installation, repair, and service work to this product must be done by a suitably qualified person.
- Do not in any way modify the components of the system.
- Do not install the equipment in an explosive atmosphere: the presence of flammable gas or fumes is a serious danger to safety.
- Do not leave packing materials (plastic, polystyrene, etc.) within reach of children as such materials are potential sources of danger.
- Dispose of all waste products like packing materials, according to local regulations.
- Centurion Systems (Pty) Ltd does not accept any liability caused by improper use of the product, or for use other than that for which the system was intended.
- This product was designed and built strictly for the use indicated in this documentation. Any other use, not expressly indicated here, could compromise the service life/operation of the product and/or be a source of danger.
- Anything not expressly specified in these instructions is not permitted.
Technical Specifications
| Power supply input | 110 – 265V AC (50 / 60Hz) |
|---|---|
| Output | 14.3V DC Max @ 1.5 – 1.7A (+/- 5%) |
| IP rating | IP20 |
1178.D.01.0001_18082022
Centurion Systems (Pty) Ltd
www.centsys.com
Documents / Resources
|
CENTSYS CP84SM Charger Manual
Insert
[pdf] User Manual
CP84SM, Charger Manual Insert, CP84SM Charger Manual Insert
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>