Mircom FOM-2000-UM Single-Mode or Multi-Mode Fiber Module Owner’s Manual
- June 9, 2024
- Mircom
Table of Contents
Mircom FOM-2000-UM Single-Mode or Multi-Mode Fiber Module
Description
The FOM-2000-UM allows for single-mode or multi-mode fiber optic communication
on a FleX-Net™ network.
Plug-in optical modules allow for cost-effective network configurations made
of fiber only or a mix of wires, single-mode fibers and multi-mode fibers.
Single mode fiber links can be up to 10 km in length and multi-mode links can
be up to 1.5 km.
The FOM-2000-UM is compatible with LC Duplex terminated fiber pairs or patch
cords.
Installation in a FleX-Net™ network requires FNC-2000 network interface
controllers.
-
FOM-CONN-MM
-
FOM-CONN-SM
-
FOM-2000-UM
Features
- Compatible with LC Duplex terminated fibre pairs or patch cords
- No system configuration changes or special firmware needed
- 2 bays for optical modules
- Optical isolation prevents ground loops
- For use with FleX-Net panels
- Multi-mode & single-mode can be used with fibre pairs that are the same type
- Max of 63 nodes can be connected
Specifications
Single-Mode
Fiber type| Single-mode 9/125 µm
Connection type| LC Duplex
Input rating| Alarm: 16 mA @ 24 VDC
Standby: 16 mA @ 24 VDC
Optical link budget| 9.8 dB
Wavelength| 1310 nm
Temperature range| 0ºC to 49ºC ambient, 93% relative humidity (non-condensing)
Maximum length| 10 km
Multi-Mode
Fiber type| Multi-mode
(50/125 µm or 62.5/125 µm)
Connection type| LC Duplex
Input rating| Alarm: 42 mA @ 24 VDC
Standby: 42 mA @ 24 VDC
Optical link budget| 6.6 dB
Wavelength| 1310 nm
Temperature range| 0ºC to 49ºC ambient, 93% relative humidity (non-condensing)
0| 1.5 km
Ordering Information
| Model | Description |
|---|---|
| FOM-2000-UM | Allows for single-mode or multi-mode fibre optic communication on |
a Flex-Net network. Add FOM-CONN-SM and FOM-CONN-MM
FOM-CONN-SM| Fibre Optic Connector Single Mode (pack of 2). Must use a
FOM-2000-UM
FOM-CONN-MM| Fibre Optic Module Connector Multi-mode (pack of 2). Must use a
FOM-2000-UM
FNC-2000| Fibre Network Controller (Connects to the FOM-2000-UM)
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE
THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This
document contains intellectual property of Mircom. The information is subject
to change by Mircom without notice. Mircom does not represent or warrant
correctness or completeness.
Customer Support
Canada
25 Interchange Way Vaughan, ON L4K 5W3
Telephone: 905-660-4655 | Fax:
905-660-4113
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655 | Fax Toll
Free: 888-660-4113
www.mircom.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>