Mircom SP-Series 4 Inch Bright White Speakers Owner’s Manual
- June 9, 2024
- Mircom
Table of Contents
Mircom SP-Series 4 Inch Bright White Speakers
Description
Mircom’s SP-Series 4” Speakers are designed for broadcasting high quality tone
signals and are ideal for alarm signaling in hotels, malls, apartments and
other areas where attractive appearance and dependable performance are prime
concerns.
The SP-Series 4” Speakers consist of a loudspeaker, 6 oz. magnet, a low
profile constant voltage line matching transformer, a D.C. blocking capacitor
and an all steel speaker baffle finished in a bright white colour. The 25 and
70 volt transformers are of the matching type and include output power taps of
¼, ½, 1 and 2 watt(s). Tap selection is made by wiring into the appropriate
slot on the speaker’s terminal block. The SP-Series speakers install easily
using the surface or flush backboxes.
Mircom fire alarm speakers are specially designed for high quality emergency
fire alarm signals and voice communication. These units be can be used with
Mircom’s QX-5000 Voice Evacuation System or any voice alarm equipment approved
by Underwriters Laboratories of Canada (ULC).
Features
- 25 & 70 volt line matching transformers
- High dBA output (over 90 dBA at 10 feet @ 2 watts)
- D.C. blocking capacitor for line supervision
- Terminal block connection for speaker tap/output selection
- Multiple output taps. Selection for ¼, ½, 1 or 2 watts
- Moisture resistant
- Fire retardant cone material
- Factory assembled and tested
- Each speaker is equipped with a ground wire
- Bright white speaker baffle
- Round or square baffles
Wiring Instructions
Desired wattage is selected by wiring into the corresponding terminal on the speaker terminal block.
NOT TO BE USED FOR INSTALLATION PURPOSES.
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE
THE PRODUCTS TECHNICALLY.
Speaker Specifications
MODEL NUMBER
| ****
SPEAKER VOLTAGE
| SPEAKER dBA 10 FT.| MOUNTING CONFIGURATIONS| ****
BAFFLE SHAPE
|
---|---|---|---|---|---
WATT TAP TYPICAL dBA|
FLUSH| SURFACE|
¼ WATT| ½ WATT| 1 WATT| 2 WATT|
SP-104A-25W| 25| 77| 81| 83| 86| IB-104| N/A| ROUND|
SP-104A-70W| 70| 77| 81| 83| 86| IB-104| N/A| ROUND|
SP-204A-25W| 25| 78| 82| 85| 87| IB-204| IB-404W| SQUARE|
SP-204A-70W| 70| 78| 82| 85| 87| IB-204| IB-404W| SQUARE|
dBA Sound Pressure Level is measured using the transformer tap shown at a
distance of 10 feet (3 meters).
This measurement is obtained in accordance with ULC Standard CAN/ULC-S541-M87.
NOTE: All Secutron enclosures are equipped with a ground screw hole. Each
speaker unit is equipped with a ground wire.
Installation Instructions
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO
DESCRIBE THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This
document contains intellectual property of Mircom. The information is subject
to change by Mircom without notice. Mircom does not represent or warrant
correctness or completeness.
Canada
25 Interchange Way Vaughan, Ontario L4K 5W3 Telephone:
905-660-4655 Fax:
905-660-4113
www.mircom.com
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655 Fax Toll Free:
888-660-4113
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>