Mircom FX-2003-12NDS Network Fire Alarm Control Panel Owner’s Manual

Mircom FX-2003-12NDS Network Fire Alarm Control Panel

Description

Mircom’s FleX-Net Series is a powerful intelligent networkable fire alarm solution designed with many levels of flexibility to meet virtually any application of detection, control, notification and emergency communications. Features such as fire detection & alarm, audio/voice evacuation, BACnet, Boolean logic, networking and graphical work stations allow this modular solution to accommodate the simplest systems up to the most complex solutions

With the addition of the Advance Protocol (AP), Fire/CO detection and 520 Hz support on both the addressable loop and through the audio/voice evacuation, Mircom’s FleX-

Net is poised to take you even farther into the future with expanded capabilities..
Designed for peer-to-peer network communications, the FX-2003-12NDS allows for a maximum of 63 nodes, while providing reliability, flexibility and expandability.

Each base panel consists of one intelligent signaling line circuit (SLC) capable of supporting 159 analog Sensors and 159 addressable modules. In addition the base panel includes Four Style Z/Y (Class A/B) Notification Appliance Circuits and an easy to read and use, large 4 x 20 back-lit alphanumeric LCD display.

The network configuration allows the FX-2003-12NDS control panel to be connected to a Mircom network to provide additional input circuits, visual zones, programmable notification appliance circuits, and relays. The network interface module allows the panels to communicate on a peer-to-peer network via a Proprietary Arcnet Network Communications protocol.

Features

Fire Alarm Control

• 1 SLC loop expandable up to 9
• Each SLC Loop is capable of supporting 159 Analog Sensors and 159 Addressable Modules which can be wired in Style 6 or 7 (Class A) or Style 4 (Class B)
• Four Style Z/Y (Class A/B) Notification Appliance Circuits rated at 1.7 Amps each
• System has the ability to mix CLIP and AP devices on the same loop
• Large easy to use and readable 4 by 20 character Back-lit LCD Display
• English, French, Arabic and Hebrew language support (*supported by RAXN-LCDG Annunciator in place of main display)
• Correlatable Switch Inputs which allow for multi-functional outputs
• Four Status Queues for Alarm, Supervisory, Trouble and Monitor
• Auxiliary relay contacts for Common Alarm, Supervisory and Trouble
• Group bypass with built-in false alarm prevention technology
• RS-232 output for remote system printer or CRT
• Two Event History Logs; one for Alarm-related events and one for all events.
• Supports 3 configuration files with “hot swap” support
• Conventional Hardwire Adder Module expandability
• Built-in Walk Test operation
• Canadian Two Stage operation
• Provision for two programmable modules
• Configurable for Coded Operation
• Intelligent Smoke Detector sensitivity levels
• 3D graphical monitoring and control using Mircom’s Open Graphic Navigator™
• BACnet support
• Advanced (Boolean) logic functions
• Built-in Ethernet port
• Remote diagnostics via a built-in web server
• Audio/Voice Evacuation with 520Hz capability
• UL listed for Smoke Control
• HVAC Fan and Damper Control

Network Features

• Up to 63 nodes
• Peer-to-peer network communications
• Style 4 (Class B) or Style 6 or 7 (Class A) wiring configuration
• Proprietary Arcnet Network Communications protocol
• Supports copper and/or fiber optic network cable

FleX-NetTM FX-2003-12NDS Network Series Fire Alarm Control Panels

FX-2003-12NDS Compact Network Main Control Unit The FX-2003-12NDS Compact Network Main Control Unit complete with one Intelligent Signaling Line Circuit (Style 4, 6 or 7), Four Style Z/Y (Class A/B) Notification Appliance Circuits rated at 1.7 Amps each, a 4 line by 20 character back-lit LCD display and a 12 Amp Power Supply. The FX-2003-12NDS provides space for the FNC-2000 Network Controller Module, two internal adder modules and two programmable modules.

Adder Loop Controller Modules

ALCN-792MISO Isolated Quad Loop Controller Module
The ALCN-792MISO Isolated Quad Loop Controller Module provides two Signaling Line Circuits (SLC) to the FleX-Net system consisting of 159 Analog Sensors and 159 Addressable Modules per loop. The ALCN-792MISO can be expanded with the use of the ALCN-792D Daughter Board Module. The ALCN-792MISO occupies one module slot.

ALCN-792D Daughter board for Isolated Quad Loop Controller Module
The ALCN-792D Daughter Board provides an additional two SLC loops when connected to the ALCN-792MISO Isolated Quad Loop Controller Module. The daughter board mounts on top of the ALCN-792MISO.

UB-1024DS Universal Backbox
The UB-1024DS Universal backbox houses the FX-2003-12NDS and provides space to mount up to 17 AH batteries. A DOX-1024DS(R) door is ordered separately. Dimensions (minus built-in trim ring): 26”H x 14.5”W x 4.2”D

DOX-1024DS(R) Door
The DOX-1024DS mounts on the UB-1024DS backbox. The door features the universal CAT-30 lock and is available in a white (DOX-1024DS) or red exterior (DOX-1024DSR).

Fire Network Controller Modules

FNC-2000 Fire Network Controller Module
The FNC-2000 provides network capability to the FX-2003-12NDS panels. One Fire Network Controller Module is required per network node panel. In addition the FNC-2000 provides an interface for adding an optional FOM-2000-SP Fiber Optic Network Adder Module. The FNC-2000 mounts in the FX-2003-12NDS.

FOM-2000-SP Fiber Optic Network Adder Module
The FOM-2000-SP Fiber Optic Network Adder Module allows for the use of fiber optic cabling on the FleX-Net Series panels. It seamlessly connects to the interface on the FNC-2000 Fire Alarm Network Controller Module.

Electrical Specifications

Adder Hardwire Modules

DM-1008A Eight Initiating Circuit Module
The DM-1008A provides 8 Style B (Class B) or 4 Style D (Class A) Initiating Circuits configurable for Alarm, Supervisory or Trouble zones. The DM-1008A occupies one module slot in the FX-2003-12NDS.

SGM-1004A Four Notification Appliance Circuit Module
The SGM-1004A provides 4 Style Z/Y(Class A/B) Notification Appliance Circuits configurable as Silenceable or Non-Silenceable. Each NAC circuit is rated at 1.7 Amps. The SGM-1004A occupies one module slot in the FX-2003-12NDS.

RM-1008A Eight Relay Circuit Module
The RM-1008A provides the FX-2003-12NDS with eight individual configurable relays per module. Each relay provides one Form C contact rated at 28 VDC @1 Amp (resistive load) as well as a Green LED to indicate that the relay is active. The RM-1008A occupies one module slot in the FX-2003-12NDS.

Graphics Software

Open Graphic Navigator (OpenGN)
Open Graphic Navigator (OpenGN) is a centralized fire alarm management system that provides building or campus monitoring. As a powerful integration tool, OpenGN allows operators to monitor remote sites from multiple workstations or smart phones located anywhere in the world. OpenGN displays monitored buildings and campuses in both 2D and 3D representations, and is highly customizable.

Adder Auxiliary Modules

UDACT-300A Digital Alarm Communicator Module
The UDACT-300A Digital Alarm Communicator Module allows the FX-2003-12NDS to transmit addressable point information to a central station. The UDACT-300A occupies one module slot in the FX-2003-12NDS.

PR-300 Polarity Reversal/City Tie Module
The PR-300 Polarity Reversal/City Tie Module provides the system with a supervised City Tie (24 VDC/200 mA max.) and Polarity Reversal connection (24 VDC (open circuit), 8 mA max. (shorted)). The PR-300 occupies one module slot in the FX-2003-12NDS.

Programmable Modules

FDX-008W Fan Damper Control Module
The FDX-008W Fan Damper Control Module provides individually programmed circuits which can be used for fan or damper control. The FDX-008W connects to the main panel or the RAXN-LCD and occupies one display position in the FX-2003-12NDS, BB-1000 or BB-5000 Series enclosures.

IPS-2424DS/IPS-4848DS Programmable Input Switches Module
The IPS-2424DS/IPS-4848DS provides 24/48 programmable switches that can be configured for ancillary functions such as zone bypass or added common control functions. The IPS-2424DS/IPS-4848DS connects to the main panel or the RAXN- LCD when mounted remotely. The IPS-2424DS/IPS-4848DS occupies one display position in the FX-2003-12NDS, BB-1000 or BB-5000 Series enclosures.

Remote LCD Annunciators

RAXN-LCD Remote LCD Annunciator
The RAXN-LCD Remote LCD Annunciator is equipped with a 4 line x 20 character back-lit LCD display that provides the same functions as the main display on the fire alarm control panel. The RAXN-LCD occupies one display position in the BB-1000 or BB-5000 Series enclosures.

Remote LED Annunciators

RAM-1032TZDS Main Remote LED Annunciator
The RAM-1032TZDS Main Remote LED Annunciator provides common annunciator functions and 32 points of LED annunciation. The RAM-1032TZDS has indicators for A.C. On, Common Trouble and Signal Silence and controls for System Reset, Lamp Test, Fire Drill, Buzzer Silence and Signal Silence. The RAM-1032TZDS occupies one display position in the BB-1000 or BB-5000 enclosures.

Graphic Annunciator Driver Modules

MGD-32 Master Graphic Driver Module
The MGD-32 Master Graphic Driver Module provides common control inputs for the common control switches such as System Reset, Signal Silence, Auxiliary Disconnect, Fire Drill, Lamp Test, Acknowledge and General Alarm. The MGD-32 can also drive up to 32 supervised outputs. These output points are capable of driving LEDs or incandescent lamps. The MGD-32 mounts in a graphic annunciator wallbox or in the BB-5000 enclosures. An external power supply is required for incandescent lamps and lamp test.

RAXN-LCDG Remote Graphic LCD Annunciator
The RAXN-LCDG Remote Graphic LCD Annunciator is equipped with a 24 line x 40 character back-lit graphical LCD display that is used to display 9 events per page. Each event is displayed over 2 lines with 40 characters per line allowing emergency information to be displayed in an easy to read format. The RAXN-LCDG occupies one display position in the BB-1000 or BB-5000 Series enclosures.

RAX-1048TZDS Programmable LED Annunciator Module
The RAX-1048TZDS Programmable LED Annunciator Module provides 48 programmable bi-colored LEDs. The RAX-1048TZDS connects to the main panel or either the RAXN-LCD or RAM-1032TZDS when mounted remotely. The RAX-1048TZDS occupies one display position in the FX-2003-12NDS,BB-1000 or BB-5000 Series enclosures.

AGD-048 Adder Graphic Driver Module
The AGD-048 Adder Graphic Driver Module can be used with the MGD-32 to support an additional 48 supervised outputs. The AGD-048 mounts in a graphic annunciator wallbox or in the BB-5000 enclosures.

Dimensions for Annunciator Module Enclosures

Typical FleX-NetTM FX-2003-12NDS Networked System Configuration

Current Consumption

2 zone active: 0.170

4 zone active: 0.275

6 zone active: 0.370

8 zone active: 0.465

SGM-1004A| 4 Notification Appliance Circuit Module| 0.060| 0.258
RM-1008A| 8 Relay Circuit Module| 0.025| 0.150
FDX-008W| Fan Damper Control Module| 0.015| 0.035
UDACT-300A| Dialer Module| 0.045| 0.120
PR-300| City Tie Module| 0.035| 0.300
RAX-1048TZDS| Adder Annunciator Chassis| 0.022| 1 zone active: 0.026

2 zone active: 0.030

3 zone active: 0.035

4 zone active: 0.039

48 zone active: 0.262

RAM-1032TZDS| Adder Annunciator Chassis| 0.050| 32 zone active: 0.300
MGD-32| Main Graphic Driver Module| 0.035| 1.6
AGD-048| Adder Graphic Driver Module| 0.035| # of LEDs x 4mA
IPS-2424DS| Programmable Input Switches Module| 0.010| 0.015
IPS-4848DS| Programmable Input Switches Module| 0.010| 0.022

Ordering Information

Model                                    Description

Network Fire Alarm Control Panel
FX-2003-12NDS| Network Compact Main Control Unit with 12 Amp power supply. Mounts in the UB-1024DS backbox.
UB-1024DS| Universal black backbox. Requires DOX-1024DS(R) door.
DOX-1024DS| White door for UB-1024DS backbox
DOX-1024DSR| Red door for UB-1024DS backbox
Network Controller Modules
FNC-2000| Fire Network Controller Module
FOM-2000-SP| Fiber Optic Network Adder Module
Adder Loop Controller Modules
ALCN-792MISO| Network Isolated Quad Loop Controller Module
ALCN-792D| Daughter board for ALC-792MISO Isolated Quad Loop Controller Module
Adder Hardwire Modules
DM-1008A| Eight Class B (Style B) or 4 Class A (Style D) Initiating Circuit Module
SGM-1004A| Four Class A/B (Style Z/Y) Notification Appliance Circuit Module (Rated at 1.7 Amps per circuit)
RM-1008A| Eight Relay Circuit Module c/w eight form C relays (Rated for 28 VDC @ 1 Amp max. per relay)
Adder Auxiliary Modules
UDACT-300A| Digital Alarm Communicator Transmitter/Dialer Module
PR-300| Polarity Reversal and City Tie Module
Remote Annunciators
RAXN-LCD| Remote LCD Annunciator
RAXN-LCDG| Remote Graphic LCD Annunciator
RAM-1032TZDS| Main Remote LED Annunciator c/w 32 Bi-Colored LEDs
RAX-1048TZDS| Programmable LED Annunciator Module c/w 48 Bi-Coloured LEDs and 48 Trouble LEDs
Programmable Modules
IPS-2424DS| Programmable Input Switches Module c/w 24 selector switches and 24 bi-coloured LEDs
IPS-4848DS| Programmable Input Switches Module c/w 48 selector switches and 48 bi-coloured LEDs
FDX-008W| Fan Damper Control Module
Enclosures for Remote Annunciators / Programmable Modules
BB-1001D| Remote Enclosure. Houses one module. Add suffix “R” for red, “S” for stainless steel, and “B” for black door.
BB-1002D| Remote Enclosure. Houses two modules. Add suffix “R” for red, “S” for stainless steel, and “B” for black door.
BB-1003D| Remote Enclosure. Houses three modules. Add suffix “R” for red, “S” for stainless steel, and “B” for black door.
BB-1008D| Remote Enclosure. Houses eight modules. Add suffix “R” for red and “B” for black door.
BB-1012D| Remote Enclosure. Houses twelve modules. Add suffix “R” for red and “B” for black door.
Graphic Driver Modules
MGD-32| Main Graphic Driver Module c/w 32 Supervised Outputs
AGD-048| Adder Graphic Driver Module c/w 48 Supervised Outputs
Graphics Software
OGN-FLSLIC-ONE| Single Fire Alarm Control Panel License (Price per connection)

Requires: OGN-KEY (sold seperately) Contact us for non-Mircom panel connections

OGN-FLSLIC-EXP| Fire Alarm Control Panel License for 2-9 Connections (Price per connection) Requires: OGN-KEY(sold seperately) Contact us for non-Mircom panel connections
OGN-FLSLIC-STD| Fire Alarm Control Panel License for 10-99 Connections (Price per connection) Requires: OGN-KEY (sold seperately) Contact us for non-Mircom panel connections
OGN-FLSLIC-ENT| Fire Alarm Control Panel License for 100+ Connections (Price per connection) Requires: OGN-KEY (sold seperately) Contact us for non-Mircom panel connections
---|---
OGN-KEY| OGN License Key Stick
Accessories
UIMA4| Interface for Configuring MGC Fire Panels
MGC-CONFIG-KIT4| Fire Panel Configuration KIT with UIMA4.

THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance, installation, testing and certification, refer to technical literature. This document contains intellectual property of Mircom. The information is subject to change by Mircom without notice. Mircom does not represent or warrant correctness or completeness.

Canada
25 Interchange Way Vaughan, Ontario L4K 5W3 Telephone: 905-660-4655 Fax: 905-660-4113 www.mircom.com

U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655 Fax
Toll Free: 888-660-4113

firealarmresources.com

References

• Fire Alarm Resources | Download fire alarm documents
• Mircom - Smart Buildings. Smarter Solutions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>