MGC-CONFIG-KIT4 Fire Panel Configuration Kit User Manual
- June 9, 2024
- MGC
Table of Contents
FIRE PANEL CONFIGURATION KIT
MGC-CONFIG-KIT4
Description
The MGC-CONFIG-KIT4 includes all necessary cables and connectors to configure
most Mircom and Secutron Fire Alarm Control Panels and Voice Evacuation
Systems.
This kit is also used for connecting the FleX-Net™ MP Upgrade Wizard to a
FleX-Net™ / MMX.
Features
- For configuring the following panels:
- FleX-NetTM, FA-300, FX-350, FX-2000, FX-3500, FX-3318, QX-5000, UDACT-300, MR-2300, MR-2350, MMX
- For use with the FleX-Net™ MP Upgrade Wizard
- Includes one replacement 10 pin cable
Contents of MGC-CONFIG-KIT4
Contents of MGC-CONFIG-KIT4
UIMA4 interface
| • For configuring the following panels:
• FleX-Net™
• FA-300
• FX-350
• FX-2000
• FX-3500
• FX-3318
• QX-5000
• UDACT-300
• MR-2300
• MR-2350
• MMX
• For use with the FleX-Net™ MP Upgrade Wizard
• Includes 1 replacement 10 pin cable
UIMA4
---|---
9 pin male to female serial cable
| • For use with the FleX-Net™ MP Upgrade Wizard to connect the UIMA4
interface to FleX-Net™, MMX, and RAXN-LCD(G)
MD-508
MGC-CONFIG-KIT4 Instructions| • Refer to this manual for instructions on
using the MGC-CONFIG-KIT4
LT-6230
10 to 8 Pin Adapter
| • For use with the FleX-Net™ MP Upgrade Wizard to connect the
UIMA4 interface to ANC-5000 or ALCN-792M
RPL-MD-1211
USB A to B Male Cable
| • For use with the following products:
• FX-3500
• FX-3318
• QX-mini
• AUDMAX-MASTER
• ALCN-792MISO
• ALCN-960MISO
MD-813
UIMA4 Driver Installation
Instructions| • Refer to this manual for instructions on installing the
drivers for the
UIMA4 interface LT-6231
FleX-Net™ MP Upgrade Wizard Manual| • Refer to this manual for instructions on
using the FleX-Net™ MP
Upgrade Wizard LT-6232
Ordering Information
| Model | Description |
|---|---|
| MGC-CONFIG-KIT4 | Fire Panel Configuration Kit4 with UIMA |
| UIMA4 | Interface for Configuring MGC Fire Panels |
| RPL-WC-25022 | Replacement Ribbon Cable for UIMA4 (Pack of 3) |
Canada
25 Interchange Way Vaughan, ON L4K 5W3
Telephone: 905-660-4655 | Fax:
905-660-4113
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655 | Fax Toll
Free: 888-660-4113
www.mircom.com
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE
THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This
document contains intellectual property of Mircom. The information is subject
to change by Mircom without notice. Mircom does not represent or warrant
correctness or completeness.
CATALOG NUMBER
9519 Rev. 0
firealarmresources.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>