Mircom SD SERIES Photoelectric Smoke Detectors Owner’s Manual
- June 9, 2024
- Mircom
Table of Contents
Mircom SD SERIES Photoelectric Smoke Detectors
Description
The SD Series photoelectric smoke detectors are engineered to meet strict UL fire safety codes and effectively respond to a wide spectrum of fires. The SD Series smoke detectors are suitable for use in commercial, industrial, institutional and residential occupancies. The sleek low-profile design of thedetectors emphasizes ease of installation and field maintenance. The SD Series consists of six models: SD-2WP / SD-2WT / SW-2WP-LED / SD-2WT-LED The SD-2WP is a two-wire photoelectric smoke detector for use with electrically compatible fire alarm control units. The SD-2WT is a two-wiresmoke detector that uses photoelectric technology in conjunction with a fixed temperature heat sensor to further extend its sensing capabilities. Additional two wire models (SD-2WP-LED and SD-2WT-LED) are available with a remote LED output. SD- 4WP / SD-4WT The SD-4WP is a four-wire photoelectric smoke detector. The SD- 4WT is a four-wire photoelectric smoke detector with a fixed temperature heat sensor.
Features
- Two and four wire models
- Photoelectric smoke sensing technology
- Uses a smoke sensor in conjunction with a fixed-temperature heat sensor to extend reliability
- Durable sensor head, no need for replacement
- Remote LED output on select 2-wire models
- N/C (normal close) or N/O (normally open) selectable relay output
- Easy installation and maintenance
- Attractive sleek housing
- UL listed
All SD Series smoke detectors come equipped with a sleek low-profile design and durable sensor head. Utilizing advanced detection and discrimination algorithms, the SD Series smoke detectors provide quality and reliability.
Installation Diagram
NOT TO BE USED FOR INSTALLATION PURPOSES.
Mircom reserves the right to make changes at any time without notice in
prices, colours, materials, components, equipment, specifications and models
and also to discontinue models.
Electrical Specifications
Model
| ****
2/4 wire
| Heat Sensor| Voltage DC| Standby Current (Max.)| Alarm Current (Max.)| Surge Current (Max.)| Star-Up Time (Max.)| Permissible Current (Max.)| ****
Frequency
| Alarm contact
---|---|---|---|---|---|---|---|---|---|---
SD-4WT| 4| 135°F| 12/24V| 370μA| 35mA| | 60
Seconds
| 80mA| 3-5
Seconds
| Form A
SD-4WP| 4| | 12/24V| 370μA| 35mA| | 60
Seconds
| 80mA| 3-5
Seconds
| Form A
SD-2WT| 2| 135°F| 12~28V| 150μA| 70mA| 160μA| 60
Seconds
| 80mA| 3-5
Seconds
| —
SD-2WP| 2| | 12~28V| 150μA| 70mA| 160μA| 60
Seconds
| 80mA| 3-5
Seconds
| —
SD-2WT-LED| 2| 135°F| 12~28V| 150μA| 70mA| 160μA| 60
Seconds
| 80mA| 3-5
Seconds
| —
SD-2WP-LED| 2| | 12~28V| 150μA| 70mA| 160μA| 60
Seconds
| 80mA| 3-5
Seconds
| —
Smoke Sensitivity| 2.66+/- 1.11% FT Obscuration (UL standard)
---|---
Detection Range| 50 foot rating for heat sensor
Start-Up Current| 70 µA Maximum
Alarm Impedance| For 2-wire models: 100Ω+3V max; 560Ω+3V max (red LED
open circuit)
Reset Voltage| Less than 1 volt
Reset Time| Less than 1 sec
Alarm Indicator| Continuously emitting red light
Temperature range| -10°C to 50°C
Humidity| 0 to 95% RH, non condensing
Alarm Contact| For 4-wire: N/O or N/C Operation
Form A: 1.0A@30VDC/0.5A@125VAC
Dimensions| 100mm (dia) x 46mm (ht) with base
Weight| 130g/set with base
Ordering Information
Model | Description |
---|---|
SD-2WP | 2-wire photoelectric smoke detector. Includes 4-inch base. |
SD-2WT | 2-wire photoelectric smoke detector with heat sensor. Includes 4-inch |
base.
SD-2WP-LED| 2-wire photoelectric smoke detector with heat sensor and remote
LED output. Includes 4-inch base
SD-2WT-LED| 2-wire photoelectric smoke detector with heat sensor and remote
LED output. Includes 4-inch base.
SD-4WP| 4-wire photoelectric smoke detector c/w 4-inch base
SD-4WT| 4-wire photoelectric smoke detector with heat sensor c/w 4-inch base
NOT TO BE USED FOR INSTALLATION PURPOSES.
Canada 25 Interchange Way Vaughan, Ontario L4K 5W3 Telephone: 905-660-4655 Fax: 905-660-4113
Web page: http://www.mircom.com
- Email: mail@mircom.com
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNI-CALLY. For complete and accurate technical information relating to performance, installation, testing and certification, refer to technical literature. This document contains the intellectual property of Mircom. The information is subject to change by Mircom without notice. Mircom does not represent or warrant correctness or completeness.