Mircom MR-100-MR-200 SERIES Multi-Voltage Control Relays Owner’s Manual
- June 9, 2024
- Mircom
Table of Contents
MULTI-VOLTAGE CONTROL RELAYS
MR-100/MR-200 SERIES
Description
The MR Series Multivoltage Control Relays offer SPDT or DPDT 10 Amp resistive
contacts which may be operated by one of four input control voltages. A single
relay may be energized from a voltage source of 24VDC, 24VAC, 120VAC or 230VAC
by wiring to appropriate input terminals.
Each relay position contains a red LED which indicates the relay coil is
energized. Relays may be “snapped apart” from a standard 4 module assembly and
used independently.
These Devices are Ideal for applications where local contacts are required for
system status, remote contacts for control of electrical loads and general
purpose switching. They are suitable for use with HVAC, Temperature Control,
Fire Alarm, Security, Energy Management and Lighting Control Systems.
Features
- Relays may be energized from a voltage source of 18 to 35VDC or VAC, 120VAC or 230VAC
- Each relay position contains a red LED, which illuminates when the coil is energized. This provides a time saving device when checking an installed system no metering is required
- Single, dual or triple relay modules may be “snapped apart” from standard 4-position master
- DC control inputs are polarized
- For continuous duty use at 24VAC, 24VDC or 120VAC (NOTE: Not intended for continuous duty use @ 230VAC)
- Available in dust resistant enclosures with LED viewing port(s)
- “C” versions mounted in enclosures
- “C/R” versions with red covers for NYC and other uses
- “T” versions come complete with track mounting hardware which facilitates installation in standard cabinets
- UL recognized relays rated at 10,000,000 mechanical operations
- UL listed as Control Unit Accessory
Electrical Specifications
Coil Voltage
MR-100| 24(18-35)VDC, 24(18-35)VAC, 120VAC, 230VAC
MR-200| 24(18-35)VDC, 24VAC, 120VAC, 230VAC
(Pull In Voltage: 75% of nominal max. @ 25°C; Drop Out Voltage: 25% of nominal
min. @ 25°C)
Ambient Temperature| -58°F to 185°F (-50°C to 85°C) @
85% RH, NON-Condensing
---|---
Wiring| #14 to #22 AWG terminals
Current Requirement| Per Module Position: MR-100 Series
= 18mA / MR-200 Series = 40mA
---|---
Contact Ratings| 7A @ 28VDC / 10A (NO:1/6HP,
NC:1/8HP) @ 120VAC / 7A @ 230VAC
Contact Construction| Dry Form “C”
CATALOG NUMBER
5278
NOT TO BE USED FOR INSTALLATION PURPOSES.
Mircom reserves the right to make changes at any time without notice in
prices, colours, materials, components, equipment, specifications and models
and also to discontinue models.
Specifications
Model Number| Module
Position| Contacts| Track Mounted (HxWxD)| Enclosure
Mounted
(HxWxD)| Cover Material
---|---|---|---|---|---
MR-101/T| 1| SPDT| 3.25” (82.6mm) x 2.125”
(54mm) x 1.5” (38.1mm)| Enclosure Mounted
(HxWxD)|
MR-101/C| 1| SPDT| | 5.125” (130.2mm) x 3.125”
(79.4mm) x 2.5” (63.5 mm)| Grey ABS-94VO Plastic
MR-101/C/R| 1| SPDT| | Red ABS-94VO Plastic
MR-104/C| 4| SPDT| | 5.125” (130mm) x 9.50”
(241mm) x 2.50” (63mm)| Plated 18GA CRS
MR-201/T| 1| DPDT| 3.25” (82.6mm) x 2.125”
(54mm) x 1.5” (38.1mm)| |
MR-201/C| 1| DPDT| | 5.125” (130.2mm) x 3.125”
(79.4mm) x 2.5” (63.5 mm)| Grey ABS-94VO Plastic
MR-201/C/R| 1| DPDT| | Red ABS-94VO Plastic
MR-204/T| 4| DPDT| 3.25” (82mm) x 8.5”
(215mm) x 1.50” (38mm)| |
MR-204/C| 4| DPDT| | 5.125” (130mm) x 9.50”
(241mm) x 2.50” (63mm)| Plated 18GA CRS
MR-204/C/R| 4| DPDT| | Red 18GA CRS
Wiring Diagrams
Ordering Information
Model Number | Description |
---|---|
MR-101/T | Single SPDT Relay with LED, Track Mounted |
MR-101/C | Single SPDT Relay with LED, Enclosure Mounted (Grey) |
MR-101/C/R | Single SPDT Relay with LED, Enclosure Mounted (Red) |
MR-104/C | Four SPDT Relay with LED, Enclosure Mounted (Grey) |
MR-201/T | Single DPDT Relay with LED, Track Mounted |
MR-201/C | Single DPDT Relay with LED, Enclosure Mounted (Grey) |
MR-201/C/R | Single DPDT Relay with LED, Enclosure Mounted (Red) |
MR-204/T | 4-Position DPDT Relay with LED, Track Mounted |
MR-204/C | 4-Position DPDT Relay with LED, Enclosure Mounted (Grey) |
MR-204/C/R | 4-Position DPDT Relay with LED, Enclosure Mounted (Red) |
Canada
25 Interchange Way Vaughan,
Ontario L4K 5W3
Telephone: 905-660-4655
Fax: 905-660-4113
www.mircom.com
|
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Toll Free: 888-660-4655
Fax Toll Free: 888-660-4113
Email: mail@mircom.com
---|---
NOT TO BE USED FOR INSTALLATION PURPOSES. Distributed by:
ISO 9001:2008
REGISTERED
CAT. 5273 Rev.1
firealarmresources.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>