MGC EOL-103 Network Service Kit User Manual
- June 9, 2024
- MGC
Table of Contents
MGC EOL-103 Network Service Kit
Part Description
| Quantity | Part Number | Part Description | Notes |
|---|---|---|---|
| 20 | EOL- 103 | **** |
End of line resistor – 10K, 2W, 5%
| For TNC-5000 telephone network controller module and QAA-5230, QAA-5230S,
QAA-5160 amplifiers
20| EOL- 223| End of line resistor – 22K, 2W, 5%| For QAA-5415
amplifiers
20| EOL- 392| End of line resistor – 3K9, 2W, 5%| For on-board
NAC circuits
20| EOL- 473| End of line resistor – 47K, 2W, 5%| For M500M
module
100| HD- 029| MET SCR, #8 x 1/4″,PAN,PH,’B’,ST.ZINC| Self-
tapping screw
100| HD- 050| Nut, #6-32 x 1/4″, hex, integral lockwasher|
100| HD- 112| Machine screw, #6-32 x 1/4″, PAN, PH, ST.ZINC|
100| HD- 212| Nut, #8-32, hex, integral lockwasher, ST.ZINC|
100| HD- 215| Nut, #10-32, hex, integral lockwasher, ST.ZINC|
5| MD- 525| Flat cable assembly, 34 conductors, 60″| Ribbon
cable for QBB-5001 multiple cabinet extension
5| MD- 575| ****
Flat cable assembly, 26 conductors, 24″
| Ribbon cable for RM-1008A, DM-1008A, SGM-1004A
adder modules
5| MD- 579| ****
Power cable, 4 conductors, 5″
| Power cable for RM-1008A, DM-1008A, SGM-1004A adder
modules
5| MD- 580| ****
Power cable, 4 conductors, 24″
| Power cable for RM-1008A, DM-1008A, SGM-1004A adder
modules
5| MD- 650| ****
Extender ribbon cable, 34cct, 36″
| Ribbon cable for display modules (except main display)
5| MD- 678| Flat cable assembly, 50 conductors, 36″| Ribbon
cable for main display module
5| MD- 687| ****
Extender ribbon cable, 34cct, 12″
| Ribbon cable for display modules (except main display)
5| MD- 903| ****
Ribbon Cable, 60 pins 25 mils 6″ Long F-F
| Ribbon cable for FNC-2000 network interface controller module
5| MD- 985| ****
Ribbon cable, 8 pins, 35″, F-F-F
| High-speed audio cable for ANC-5000 network audio controller module
Quantity| Part Number| Part Description| Notes
---|---|---|---
5| MD- 991| ****
Ribbon cable,10cct, 20″, F-F- RS-485
| RS-485 cable for ANC-5000 audio network controller module
5| NP- 680| Slide-in paper label| For RAM-1016(TZ)(DS),
RAM-1032(TZ)(DS)
5| NP- 681| Slide-in paper label| For RAX-1048(TZ)(DS)
5| NP- 7015| Slide-in paper label| For RAXN-LCDG
5| NP- 7173| Slide-in paper label| For MGC network panels
5| NP- 741| Slide-in paper label| For IPS-2424, QAZT- 5302(DS)
5| NP- 818| Display label| For QAA-5415 amplifiers
5| NP- 836| Slide-in paper label| For RAX-LCD, RAXN-LCD
5| NP- 836F| Slide-in paper label| French label for RAX-LCD,
RAXN-LCD
5| NP- 851| Slide-in paper label| For FDX-008(KI)
10| OP- 116| 4 A fuse, fast AGC4| For QAA-5230, QAA-5230S
amplifiers
5| OP- 119| 20 A fuse| Install in WX-059
10| OP- 122| 8 A fast acting fuse, AGC-8| For QAA-5160
amplifier
10| OP- 210| 3 A fuse GMA (5×20 mm)| For QAA-5415 amplifiers
100| SK- 014| Socket jumper 2-pins, 100 mils PITCH| To
terminate jumper pins
5| WX- 050| Battery bundled wires| For the QBB-5001 expansion
audio cabinet
5| WX- 059| 16 AWG bundled battery wire assembly – 36″| For MGC
network panels, install OP-119
www.mircom.com LT-6116 Rev. 2 August 2018.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>