Mircom DTC-300A Stand Alone Digital Alarm Communicator Owner’s Manual
- June 9, 2024
- Mircom
Table of Contents
Mircom DTC-300A Stand Alone Digital Alarm Communicator
Description
The DTC-300A Stand-Alone Digital Alarm Communicator Transmitter/Dialer Module is a six zone fi re alarm communicator that can be connected to any 24 VDC fi re alarm control panel to provide fi re reporting to a monitoring facility. The DTC-300A utilizes two telephone lines to transmit information for six confi gurable input zones to a Digital Alarm Communicator Receiver (DACR). The input zones can be confi gured for Common Alarm, Common Trouble, Common Supervisory, Common Waterfl ow Alarm, AC Power Fail Trouble and Battery Trouble. The DTC- 300A requires a 24VDC fi ltered or 24VDC Full Wave Rectifi ed (FWR) power source. The Digital Communicator can be programmed for dual line operation and uses the Security Industry Association (SIA) and Ademco Contact ID reporting protocols. The DTC-300A can be confi gured locally via the on-board keypad and the CFG-300 Confi guration Tool or with a UIMA programming tool and a computer with an available serial or USB port. In addition the DTC-300A can be remotely confi gured using a personal computer with a modem.
Features
- Connects to any 24VDC fi re alarm control panel to provide fi re reporting to a monitoring facility
- Transmits information for six confi gurable input zones on two telephone lines to a Digital Alarm Communicator Receiver (DACR)
- Input zones can be confi gured for Common Alarm, Common Supervisory, Common Trouble, Common Waterflow Alarm, AC Power Fail Trouble and Battery Trouble
- DTC-300A has the ability of disconnecting the incoming and outgoing calls and capturing the line for transmission to the Digital Alarm Communicator Receiver (DACR)
- Onsite or remote programming
- Onsite confi gurable with the on-board keypad and the CFG-300 Confi guration Tool or using the UIMA Programming Tool and caomputer with an available serial or USB port
- Remotely confi gurable via a Personal Computer with a modem (Configuration is passcode protected)
- Provides telephone line monitoring and reports status via LED indication on-board
- Provides event logs of 500 entries each to save events from local dialer or remote fi re alarm panel
- Logs can be reviewed locally with the CFG-300 Confi guration Tool or remotely via modem
- Continuously supervises the status of each of two connected telephone lines at approximately one minute intervals
- Provides LED indication for AC Power, Common Trouble, CPU Fail and Ground Fault
- Requires 24VDC fi ltered or 24VDC Full Wave Rectifi ed (FWR) power supply
CFG-300 Confi guration Tool
The CFG-300 Confi guration Tool is required for onsite programming of the DTC- 300A. The CFG-300 plugs into the DTC-300A to provide a two line by 20 character LCD display. The CFG-300 tool is used for confi guration purposes only and not for normal operation.
Current Consumption
| Standby | 60 mA |
|---|---|
| Alarm | 110 mA |
DTC-300A Connection Diagram
DTC-300A Wiring Diagram
Ordering Information
| Model | Description |
|---|---|
| DTC-300A* | Standalone Digital Alarm Communicator Transmitter |
| CFG-300 | Configuration Tool |
| UIMA | Universal Programming Tool |
Canada
25 Interchange Way Vaughan, Ontario L4K 5W3 Telephone:
905-660-4655 Fax:
905-660-4113
Web page: http://www.mircom.com
Email: mail@mircom.com
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655 Fax Toll Free:
888-660-4113
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>