Kanlux 33478 LED Floodlight User Manual

Kanlux 33478 LED Floodlight

WHAT IS IN THE BOX

ACCESSORIES FL AGOR HI

FL AGOR HI GRID 240W

FL AGOR HI GRID 300W

INSTALLATION INSTRUCTIONS

Not included

Caution! Do not touch! Can cause burning! The product heats up to a high temperature Tmax=90°C.

INTENDED USE / APPLICATION

For industrial applications (e.g. in manufacturing floors, warehouses, etc.).

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS

Use only outdoors.

USAGE GUIDELINES / MAINTENANCE

Replacing the light source in the housing is impossible. If the light source is damaged replace the entire housing. Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product with non-replaceable light source of the LED type. Product cannot be fixed if the light source becomes damaged. ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
The construction of the product offers no resistance to specific conditions, e.g. due to the presence of defrosting substances and salt atmosphere

EXPLANATIONS OF SYMBOLS USED

P1: Rated voltage, frequency.

P2: Rated power.
FL AGOR HI 240W NW
FL AGOR HI 300W NW
FL AGOR/A HI 240W NW
FL AGOR/A HI 300W NW

P3a: Rated luminous flux.
P3b: Useful luminous flux (Φuse)

P4: Rated durability.

P5: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs  Union.

P6: Colour temperature.

P7: Viewing angle.
FL AGOR
FL AGOR/A

P8: Class I. A product in which protection against electric shock is provided not only by means of basic insulation but also through additional safety measures, i.e. extra protective circuit to which protective conductor of the fixed feeding installation needs to be connected.

P9: Dust-proof product.
P10: Protection against water jets provided.

P11: Use only outdoors.

P12: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.

P13: Angle control of the fixture.

P14: The product can only be used in a lighting fixture with protective glass.
P15: The chipped globe, screen or protective shield must be replaced immediately.

P16: Product meets the requirements of EU directives.

P17: The product is not compatible with lighting dimmers.

P18: Environmental operating temperature range that the product can be exposed to.

P19: Protection against mechanical impact with energy = 5J.

P20: The product is compliant with all relevant United Kingdom regulations.

P21: The product meets the requirements of technical regulations applicable in Ukraine.

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended.
P22: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Kanlux products visit www.kanlux.com.
Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>