Imou RV-L11-A Dust Collection Robot Vacuum Cleaner User Manual

Imou RV-L11-A Dust Collection Robot Vacuum Cleaner

Instructions Before Cleaning

• Remove plugs and power cords that could entangle the robot.
• Fold the carpet tasseled edges under to improve the cleaning efficiency.
• Put the weight scales out of the area to be cleaned.
• Do not use the robot on wet surfaces or floors with standing water.
• Do not use the robot on wet surfaces or floors with standing water.
• Put away the mops Or pieces of paper on the floor.

Preparation Before Using

1. Remove Protective Materials
   • Place the robot on a flat surface and then remove all protective materials on the robot.
2. Dust Collection Charging Dock Placement
   • Place the charging dock on the flat ground against the wall.
   • Keep the area around the Charging Dock clear of objects.
3. Charge the Robot

• Press and hold for 3s to power on the robot. Press to send the robot back to the Charging Dock to charge.
• The robot will enter standby mode when the robot is fully charged.
• For the first-time cleaning, please ensure that the Robot is fully charged.
• It is recommended that the Robot start cleaning from the Charging Dock to test the recharging process.
• The Robot automatically returns to the Dock to charge when its battery is low.
• It resumes cleaning from the last cleaning spot after the Robot has enough power.
• Charging White flashing slowly
• Fully charged ( ‘) Solid white

Cleaning System

1. Start
   

   • Press to start Auto-cleaning.
   • Press and hold for 3s to start Spot cleaning.

2. Pause

   • during cleaning, press or to pause cleaning.
   • The Robot enters sleep after it is paused for 60 minutes. Press or wake up the robot.

3. Automatically / Manually Recharge

   • Auto-recharge: Low battery during cleaning./Cleaning completed
   • During cleaning, press or pause cleaning.
   • Press again, and the robot returns to the charging dock and recharges.

4. Power Off

   • When the Robot paused, press and hold for 3s to power it off. The LED indicator flashes white fast to off.
   • During charging, the Robot can not be powered off or enters the sleep

Mopping

1. Uninstall the water tank
   • Press the release button on the dust box to remove the water tank.
2. Installthe Mop Bracket
3. AddWater
   • Purchased water is recommended.
4. Mop
   • Press to start Auto mopping.
   • Press for 3s to start Spot mopping

Connect to Imou Life App

• Before setting up the device, please make sure that the 24 GHz band Wi-Fi is enabled on your router.

Set Up the Device

• Scan the QR code belowor search for “Imou Life” in the app store to download and install the app.
• Open Imou Life app, tap +on the right upper corner of the page to add your device.
• Device adding processes varies between different versions of app. Please followthe instructions in the app that you are using.

Reset Wi-Fi and Reset the Device

• Remove the Robot from the Charging Dock, and press both ( ) and for 5s until the indicator flashes red.
• When the device is powered off, press 3s to power it on.
• When you hear the prompt sound, follow the instructions on the app to add the device.

Features

• You can view maps, set no-go areas, confñgure rooms, adjust suction power and water volume, firmware updates, and more in the Imou Life app.
• Use the app to enjoy all available features.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>