CANYON BSP-4 Portable Wireless Speaker User Guide
- June 9, 2024
- CANYON
Table of Contents
BSP-4 Portable Wireless Speaker
User Guide
Portable wireless speaker BSP-4
Quick Guide v 1.0
BSP-4 Portable Wireless Speaker
Wireless speaker
Item numbers: CNE-CBTSP4DG (dark grey), CNE-CBTSP4BL (blue), CNE-CBTSP4R (red). Functions: audio recordings playback from a connected device or memory card; radio; answering incoming smartphone calls.
SPECIFICATIONS
Type: BT wireless speaker. Input: DC 5 V. Modes: BT, TF, FM, TWS. BT:
5.0; 2,402-2,480 GHz. Supports memory cards: TF, microSD, up to 32 GB.
Formats: MP3, WAV. USB: Type-C. Operation: temperature from 0 to 40 °C,
humidity max. 70 % (no condensation); storage: temperature from —10 to 45 °C,
humidity max. 70 % (no condensation). Moisture protection: no. Size: 114x93x51
mm. Speaker: 1 p, passive radiator, 0 52 mm, 75 dB, 100-18 000 Hz, 4 0; max.
sound power 4.5 W. Microphone: —38 ± 3 dB, 2.2 0, 50-12,000 Hz, up to 10 m, 0
dBm. Battery: lithium-ion, 3.7 V, 1200 mAh, non-removable, charging time up to
3 hours, working time up to 4 hours (when connected via BT and volume is not
higher than 80%). Battery life: 300 charge cycles after full
discharge.
Accessories: CNE-CBTSP4 wireless speaker, USB Type-A cable (50 cm), quick
start guide. Recommended power supply output parameters: 5.0 V / 0.5 A.
APPEARANCE (figures A, B)
1. Protective mesh. 2. Microphone. 3. Power indicator. 4. USB Type-C
connector for charging. 5. Memory card slot. 6. Volume control buttons. 7.
Pause/play button. 8. Power button. 9. Status indicator.
BATTERY CHARGING (figure C)
Charge the speaker before using it for the first time. To do so, connect it to
a power source as shown in the figure C. While charging the device, the red
power indicator (3) lights up, when charging is complete it goes out.
SWITCH-ON (figure D) A long press on the power button (8) is accompanied
by a beep. The status light (9) flashes blue quickly, waiting to pair with the
device via BT. BT CONNECTION (figure E)
Turn on BT on your device, go to the BT settings. Find the “Canyon BSP-4” and
click on the line to pair the device with the speaker. If prompted for a
password, enter “0000” on the device. Successful connection is accompanied by
an audible signal and the status indicator lights up blue.
Note. If the speaker has previously been paired with a device, it will
automatically pair with that device when you turn it on.
To cancel pairing, go to the BT settings on the device, find “Canyon BSP-4”
and remove the connection. Next, perform the pairing process with a new
device.
PLAYBACK (figure F). CONTROL (figure G)
The status LED (9) flashes blue slowly during playback.
INCOMING CALL (figure H, I) The optimal distance to the microphone during
a call is up to 50 cm. MEMORY CARD (figure J). CONTROL (figure G) Playback
starts automatically when the memory card is inserted.
RADIO MODE (figure K, L) Turn on the speaker. Insert the Type-C charging
cable into the USB connector (4) (works as an external antenna to amplify the
radio effect). Briefly press the power button (8) to switch to radio mode.
Press and hold the pause/play button 
(7) to start scanning the FM band (search and store available radio stations). The status LED (9) blinks blue rapidly during the search. The status LED (9) flashes blue slowly during playback. When the speaker is paused, the status indicator (9) lights blue all the time.
TWO SPEAKERS CONNECTION (optional)
If you have two BT speakers of this type, it is possible to connect them to the device in stereo mode simultaneously. To do so, turn on both speakers. On one of them, press the power button (8) twice to pair the speakers. A successful pairing is accompanied by an audible signal. On one speaker, the blue status light will be on continuously, on the second speaker it will blink slowly. On your device, turn on BT and go to the BT settings (see figure E). In the list, find “Canyon BSP-4” and click on the line to pair it with the speakers. After successful pairing, you will hear a beep. The status light on the two speakers will turn solid blue. For a stable signal, the distance between speakers should not exceed 5 m, and the optimal distance from the speaker to the device is up to 10 m.
TROUBLESHOOTING
The speaker does not turn on. Charge the battery. 
Pairing is not performed.
Make sure the device is turned on and BT is activated. Place the device and
the speaker side by side. Make sure the speaker is not connected to another
device.
SAFE USE GUIDELINES
1. Do not use the speaker at a high-volume level for an extended period. This
can cause temporary or permanent hearing loss. 2. Do not drop, throw,
disassemble, or attempt to repair the device yourself. 3. Protect the device
from excessive moisture, water, dust, heat, and direct sunlight. 4. Clean the
device of dirt with a soft, dry cloth. Do not use soap or abrasive detergents.
WARRANTY CONDITIONS
The warranty period begins on the date of purchase from an authorized Canyon
retailer. The warranty period is 2 years. Service life is 2 years. For more
information about usage and warranty information, visit canyon.eu/warranty-
terms/.
OTHER INFORMATION
The information in this document is subject to change without prior notice to the user. For the latest information and details about the device, connection process, certifications, and warranty conditions, refer to the appropriate installation and operation manuals available at canyon.eu/drivers-and- manuals/.
All trademarks and brand names are the property of their respective owners.
Made in China.
Manufacturer Asics Enterprises PLC, laptop, 1, Agis Athanasios, 4101,
Limassol, Cyprus.
Tel.: +357-25-85-70-00, asbis.com.
Importer/distributor: Asics Enterprises PLC, laptop, 1, Agis Athanasios, 4101
Limassol, Cyprus, asbis.com.
Directive 2014/30/EU on electromagnetic compatibility of equipment. More
information at canyon.eu
DISPOSAL INFO
These symbols indicate that you should follow the Waste Electrical and
Electronic Equipment (WEEE) regulations when disposing of the device.
According to the regulations, the device, its batteries and accumulators, and
its electrical and electronic accessories must be disposed of separately at
the end of their service life.
Do not dispose of the device together with unsorted municipal waste, as this
would be harmful to the environment. To dispose of the device and its
batteries, return them to the point of sale or take them to your local
recycling center. For more information about recycling of this unit, contact
your local household waste disposal service.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>