IDEAL DN1040-3 Walkie Talkie Instructions
- June 9, 2024
- IDEAL
Table of Contents
IDEAL DN1040-3 Walkie Talkie
OVERVIEW
- Insert batteries with the correct polarity as shown.
- Remove exhausted batteries from tne toy.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not charge non-rechargeable batteries.
- Rechargeable batteries are to be charged under adult supervision only.
- Remove Rechargeable batteries before charging.
- Do not short-circuit supply terminals.
- Remove the battery from the product before extended storage.
- Dispose of batteries according to local, state or federal laws.
Unscrew the battery cover to replace the battery.
HOW TO OPERATE
- Open battery cover and snap in (2) 9V batteries (Not included)
- Turn the “ON/OFF” button to “ON position to get product in a stand-by mode.
- Press the “PUSH TO TALK” button to transmit.
- Release the “PUSH TO TALK” button to receive.
- Best transmission and reception are achieved when the antenna is held in a vertical position.
CAUTION:
- Your transceiver set has been fully adjusted prior to shipment from the factory, When you insert/replace a battery please ensure not to touch the internal components.
- When the sound becomes weak, it is time to change to battery.
- Always turn the front “ON/OFF” button to the “OFF” position after playing. L 4.Keep product in dry and clean place.
MORSE CODE
- DOT-SHORT PRESS/DASH=LONG PRESS
POINT APPUI COURT
- PUNTO=PULSE CORTO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>