Neomounts BEAMER-W100 Projector Mount Instructions Manual
- June 9, 2024
- Neomounts
Table of Contents
Neomounts BEAMER-W100 Projector Mount
Tools and Measurement
Parts
Installation
STEP 1
Install the extension brackets
STEP 2
Install the bracket to the projector
STEP 3
Install the mount, route the cables, and place the
cover
STEP 4
Adjust depth
STEP 5
Adjust the mount to your desired position and loosen or tighten the screws if
necessary
CAUTION
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or ads of nature. such as earthquakes or typhoons.
- it is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Please carefully inspect the area where the mount is to be Installed: – Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe Installation, first check the structure of the wall, ceiling, or floor and select a secure mounting location.
- The wall, ceiling, or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand an earthquake or another strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling, or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall. ceiling or floor type and installation of the mount the warranty of the product shall only cover the body of the mount The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
FAQ’s
What is the main purpose of the mounting?
The two objectives of mounting are to achieve perfect edge retention and to safeguard fragile or coated objects during preparation. Mounting is used when layer protection is required. Also, it makes it safer and simpler to handle specimens, such as those with tiny, sharp edges or irregular forms.
What does mounting accomplish?
With mounting, file systems, files, directories, devices, and special files are rendered usable at a certain location. This is the sole technique to access a file system. The mount command instructs the operating system to join a file system to a certain directory.
An angle can be used to mount a projector.
The projector should be mounted properly or set up on a solid, flat surface. Any angle may be used to place the projector. The projector may be positioned either horizontally or vertically.
Are there projector universal mounts?
Universal mounts can accommodate a variety of projector models. By changing the screw-hole patterns, any brand may be supported. They have projector arm extensions that may be adjusted as necessary. The mounts that you can see with the down-extending arms that hold your mount are these.
How many different mounting types exist?
Dry mounting, wet mounting, and ready mounting are the three accepted methods for creating a mount.
What are the two different types of mounts?
Equatorial and alt-azimuth mounts are the two main kinds used for astronomy telescopes. The word altazimuth refers to the two movements that the most basic type of mount has: azimuth (horizontal) and altitude (vertical).
What connections do projectors use?
There are several different types of projector connections, including USB, VGA, Component, HDMI, and Display Port. Cross- or backward compatibility between several connection types is made possible via an adapter.
Is it possible to install the projector higher than the screen?
After the projector is set up, the center of focus should be 8′′ above the top edge of the screen. It has a about 21 percent offset. So, it ought to be elevated above the screen. a screen height of 21 times.
Can you place a projector in a corner?
You may use your projector at an angle, but be ready to adjust the image. It probably begins distorted or off-center. The picture may be focused without moving the projector; instead, you can utilize keystone correction or lens shift.
What height should the projector be set at?
In rooms with theatre seating or just one or two rows, like the majority of home theatres, the bottom of the screen should normally be 24 to 36 inches high. In a room with several rows of chairs and a level floor, the bottom of the screen should be between 40 and 48 pixels high.
Does the ceiling need to be fitted with a projector?
If you shelf-mount your projector, it will be simpler to reach and cost less to install. Yet, a projector mounted on the roof of a home is kept out of the way of approaching vehicles and may be placed closer to the screen.
What screws do I need to mount my projector with?
These may be utilized starting with a #8 construction screw and above. The screws used to secure the projector to the board should only penetrate boards that are no thicker than an inch. Each larger-than-#10 screw that is not self- piloting has to have its pilot cut slightly smaller than the shaft’s diameter.
What kind of projector mount works best with low ceilings?
The Universal Adjustable 2 x 2 feet Drop Ceiling Projector Mount blends in since it is white and the same size as most drop ceiling tiles. The best feature about it is how easy it is to install and how no tile cutting is necessary. Moreover, it can tilt 180 degrees and rotate 360 degrees.
What is the main purpose of the mounting?
The two objectives of mounting are to achieve perfect edge retention and to safeguard fragile or coated objects during preparation. Mounting is used when layer protection is required. Also, it makes it safer and simpler to handle specimens, such as those with tiny, sharp edges or irregular forms.
What does mounting accomplish?
With mounting, file systems, files, directories, devices, and special files are rendered usable at a certain location. This is the sole technique to access a file system. The mount command instructs the operating system to join a file system to a certain directory.
Download this PDF Link:Neomounts BEAMER-W100 Projector Mount Instructions Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>