iiyama ProLite TF1615MC Mounting Kits User Manual
- June 9, 2024
- iiyama
Table of Contents
ProLite TF1615MC Mounting Kits
User Manual
ProLite TF1615MC Mounting Kits
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama offi ce.
- Mount-Bracket (Bracket A : 7222118A0101) : 4pcs
- L-Bracket (Bracket B : 7222119A0101) : 4pcs
- Bracket Screw M4×6 : 16pcs
- User Manual (this document)
SPECIAL NOTES
Mount-Brackets, L-Brackets and screws are necessary to install an open frame monitor.
CAUTION
- The Mount-Brackets and L-Brackets are designed to be mounted to specific wall types and hardware, in accordance with the installation instructions.
- Using Mount-Brackets, L-Brackets or screws other than those specifed in the installation instructions may damage the monitor.
-
As shown in figure below, tighten Bracket A to B using the screws supplied.
(Bracket A/B: 4 pcs each, Screws: 8 pcs)
-
Attach the Bracket A/B( ) to the back of the recess, where the monitor is to be attached, and fix it with screws.
(Customer’s screws: 8 pcs)
-
Attach the monitor from the front side of the recess and fix with the screws.
(Screws: 8 pcs)
NOTE
- You will need a screwdriver to mount the Bracket A/B.
- Brackets A/B and screws are necessary to install an open frame monitor. For details regarding the operating temperature and humidity conditions, see specification of this User Manual.
- The position of the L-bracket can be either 0 mm or 20.0 mm from the front of the monitor depending on which screw holes you choose for mounting it.
Bracket dimensions
