COMICA Vimo S-MI 2.4G Dual Channel Mini Wireless Microphone User Manual

COMICA Vimo S-MI 2.4G Dual Channel Mini Wireless Microphone

Foreword
Thanks for purchasing Comica 2.4G Dual-channel Mini Wireless Microphone Vimo S-MI.

Features

• Mini and Lightweight, Unique Magnetic Integrated Microphone
• 48kHz/24bit Record, Broadcasting-level Sound Quality
• USB Digital Output, Universal for Computers and Phones
• Stepless Volume Adjustment, One-key Muting and Denoise
• USB-C Charging/Monitoring Port, Support Pass-through Phone Charging
• Support Monitoring with Zero-latency and Mono/Stereo Switch
• Rechargeable Storage Case for Charging, Storing and Power Monitoring
• Duration Up to 15 Hours, Support Using While Charging
• Low Latency < 20ms, Working Range Up to 200m(Open Area)

Notice

• Due to 2.4G wireless characteristics, please keep face to face when use it, and don’t turn your back to the receiver, otherwise it is easy to generate breakpoints, which is a normal phenomenon.
• Due to the characteristics of lithium batteries, the transmitter’s charging indicator will show an inaccurate battery level when the charging starts, and the actual power may be lower than the indicated power. If the transmitter runs out of power, it will take more than two hours to get fully charged.
• Please pay attention that it can not realize STEREO function when in single-channel mode.
• Please do not expose the product to rain or moisture, and avoid having water or other liquids spilled on it.
• Please do not use or store the product near any heat sources such as radiators, stoves, or other heat-producing appliances.
• This product is a high-precision product, please prevent it from dropping or colliding.

Packing List

1. Transmitter(TX)
2. Receiver(RX)
3. Charging Case
4. Wind Muff
5. 2 in 1 Charging/Monitoring Adapter Cable
6. USB C-USB A Charging Cable
7. User Manual
8. Warranty Card

Components and Instruction

Transmitter (TX):

1. Internal Mic

2. Working Status Indicator:
   Blink blue slowly when unpaired; Blink rapidly when pairing; Show blue when paired; Show green when denoise is on; Show red when muting.

3. Belt Clip

4. Mute/Denoise/Pairing Switch Button:
   Short press for muting; Long press for pairing when unpaired; Long press for denoise when paired.

5. Charging Contacts

Receiver (RX):

1. Charging/Monitoring Port

2. Lightning Plug

3. Transmitter Volume Control Knob:
   Adjust the volume of transmitter 1/2 synchronously. Turn counterclockwise to increase the volume,
   and turn clockwise to reduce the volume.

4. Transmitter 1/2 Pairing Indicator:
   Blink blue when unpaired; Show blue when paired.

5. Mode Indicator:
   Show blue when in mono mode; Indicator is off when in stereo mode.

6. Mono/Stereo Switch Button:
   Short press to switch Mono/Stereo mode.

Charging Case:

1. Lightning Port

2. Battery Level Indicator Button:
   Short press to show the battery level of charging case and transmitters.

3. Charging Case Battery Level: 0-100

4. Battery Level Indicator of Transmitters:

5. The left indicators show the battery level of the transmitter placed in the charger well 1;

6. The right indicators show the battery level of the transmitter placed in the charger well 2.

7. There are four power indicator lights, one of which represents 25% of the power.

8. Charger Well 1

9. Charger Well 2

10. USB-C Charging Port

11. Restoration Hole

Installation and Usage

Pairing (All have been paired at the factory. If you need to re-pair, please follow the steps below.) Long press the pairing button on the TX to pair. The indicator lights on the TX and the RX will show blue when the pairing is successful.

Usage

1. Remove the transmitters and the receiver from the charging case
2. Install the transmitter on the collar
3. Attach the receiver to the Lightning devices (iPhone/iPad)

Monitoring/Charging

Method One
Connect USB-C headphones to monitor or connect the power bank/DC power using the USB C-USB A charging cable to charge the mobile phone.

Method Two
Connect 3.5mm headphones through the 2 in1 charging/monitoring adapter cable for monitoring and connect the power bank/DC power to charge the mobile phone at the same time

Specification

QR/CODE

• Website : comica-audio.com
• Facebook : Comica Audio Tech Global
• Instagram : Comica Audio
• You Tube : Comica Audio

The COMICA LOGO is a trademark which is registered and owned by Commlite Technology Co.,Ltd

Email : support@comica-audio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>