timberk T-SHR62LDW Electric Shaver Instruction Manual

timberk T-SHR62LDW Electric Shaver

Dear customer!
We thank you for your wise choice and for a purchase of this Timberk device. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

PRECAUTIONS

When using the electric shaver, please observe the following precautions. Improper operation while ignoring these precautions can result in an injury to the user and others, as well as damage to their property.

1. Read the manual thorough fully and keep it for future reference.

2. Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.

3. The appliance should be used only for domestic use in accordance with the present manual. The appliance is not intended for industrial use.

4. Do not use outdoors.

5. Always switch the appliance off before cleaning and when not in use.

6. To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.

7. The appliance should not be used by persons with reduced physical, sensory or mental abilities (including children), or persons having insufficient skills or knowledge, without supervision or instruction of a person responsible for their safety.

8. Children should be supervised to ensure that they do not play with the appliance.

9. Do not leave the appliance switched on when you do not use it.

10. Do not use other attachments than those supplied.

11. Don’t use the device with the damaged power cord.

12. Never try to repair this appliance by yourself. In case of failure, contact the nearest seller.

13. Keep the cord away from sharp edges and hot surfaces.

14. When unplugging the product, do not pull the power cord, but hold onto the plug. Do not twist it or wrap it around anything.

15. Never insert any objects or liquids into openings in the appliance housing.

16. Do not put working appliance anywhere as it may lead to physical damage or material loss.

17. Do not use the device with damaged parts -this may cause an injury.

18. ATTENTION! Before cleaning the appliance in water, unplug it from the mains

19. Do not throw the appliance into fire

20. If the instrument is dirty, wipe it with a dry, soft cloth. Do not use abrasive cleaners, alcohol, gasoline

21. Do not charge the device in a high humidity environment. Keep the charging port and device always dry.

22. Do not use the device near explosive substances

23. It is recommended not to use the device while charging

24. Do not wind the electrical cord around the appliance

25. Do not use the appliance if the cord is damaged

26. Turn off the device before charging

27. Always put a protective cover on the working surface of the device when transporting it.

28. The appliance must only be powered by safe extra low voltage marked on the appliance.

29. This device contains non-replaceable batteries

30. Do not charge the device for too long. Do not charge the device at temperatures below 0 oC or above 40 oC. Otherwise, it will reduce battery life.

31. This appliance can be used by children aged from 8 years and above and persons with capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of  the appliance in a safe way and understand the hazards involved.

32. Сleaning and user maintenance shall not be made by children without supervision.

33. ATTENTION! Disconnect hand-held parts from the power cord before cleaning them in water.
    If the product has been exposed to temperatures below 0 °C for some time, keep it at room temperature for at least 2 hours before turning it on.

34. Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production.

This symbol indicates that a part of the appliance can be washed under tap water.

DESIGNATION

• The device is intended to shave the beard, whiskers, moustaches.
• It can be used on dry and wet skin.
• This wet and dry shaver adapts to your needs. Shave the way you want it: in the shower, on the road, with water and foam, or use the shaver for dry skin.

SPECIFICATIONS

Specifications of the device are shown in Table 1.
Table 1

DEVICE DESCRIPTION

A) Protection cover
B) Shaving system
C) ON/OFF button
D) Battery level indicator
E) Charging indicator
F) Travel lock indicator
G) Cleaning indicator
H) USB charging port
I) Cleaning brush
J) USB cord
K) Travel case

**Fig 1***

• The picture is for reference only and may differ from the actual product

DELIVERY SET

1. Electric shaver – 1 pc.
2. USB cord – 1 pc.
3. Protection cover – 1 pc.
4. Cleaning brush – 1 pc.
5. Travel case – 1 pc.
6. Instruction manual – 1 pc.
7. Packaging – 1 pc.

BEGINNING

Charging the device
Attention: To charge the device, use only the cable supplied with the device.
Make sure the USB cable is not exposed to water and moisture

Charger
The device should be charged at temperatures between +5 oC and +35 oC. Do not leave the device to charge in the sun (Fig. 1)
Do not charge the device for more than 10 hours
Full charge time – 2 hours
After fully charged, the device can work 100 min.

Charging from the mains

1. Make sure the device is turned off before charging
2. Connect the USB cable to the device on one side, to the power adapter (not included) on the other. Plug the adapter into an electrical outlet. (Fig. 2)

It is recommended to use an adapter with the following specifications –
5V 1A

USB cable charging

1. Make sure the device is turned off before charging
2. Connect the USB cable to the device on one side, to the USB connector on the computer on the other (Fig. 3)

If the USB cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified personnel in order to avoid danger or injury.

Extended Battery Life
Fully charge and discharge the battery twice a year

Indicators of the device

Charging process
During the charging process of the device, this indicator will be on –

Full battery charge
When the device is fully charged, the percentage indicator shows –

Low battery
When the battery is low, this indicator flashes –

TRAVEL LOCK

When traveling, it is possible to set lock mode on the device. Travel lock prevents accidental activation of the device.

Tuning on travel lock
To use lock mode, press and hold the on/off button for 3 seconds. When travel lock is on, the travel lock indicator light flashes.

Turning off travel lock
Press and hold the on/off button for 3 seconds.
After travel lock is deactivated, the travel lock indicator will turn off.

NOTE!
The travel lock is automatically turns off when the shaver is connected to the charger.

OPERATION

Shaving
To turn on the device, press the “On/Off” button
Move the shaving system back and forth along the hairline, against hair growth (Fig. 4,5,6)

The best result is achieved when the face skin is dry. It is recommended to shave before or after washing.
It will take some time for your skin to get used to the new device.

NOTE
This device can also shave the hair on the neck. The device can be used on dry and wet skin.
To turn off the device, press the “On/Off” button
Place the protective cover on the head (Fig. 7)

ATTENTION:
Do not use the appliance if the shaving system or heads are damaged as this may cause skin damage.

CARE AND CLEANING

ATTENTION!
Before cleaning, turn off the appliance and unplug it from the mains.
The appliance can be cleaned under running water. Do not clean the device in hot water with a temperature higher than 60 oC

Cleaning the shaving system:

• Press the opening button of the shaving system frame (Fig. 8)
• To clean the device, clean the working heads and the hair compartment with warm water (40-60 oC) (Fig. 8.9)
• Do not damage the working heads during the cleaning process. Do not dry the working heads and shaving system with a towel or cloth
• Do not clean the device while it is being charged.
• You can use a soft brush to clean the working heads and hair compartment
• Do not wipe the work surface of the appliance with a towel or paper, as this may damage the work surface.

NOTE
For easy cleaning of the shaving head frame, you can detach it from the body of the device by pulling it upwards (Figure 8).

Cleaning reminder
When the device needs to be cleaned, the symbol for cleaning lights up red.

• For a better shave, it is recommended to clean the unit after each use.

Shaving heads, razors replacement
Blades and shaving heads retain their properties throughout the life of the product and do not require replacement if used correctly

• Do not use steel wool, abrasive cleaners or aggressive liquids such as benzene or acetone to clean the device.
• Do not dry the shaving system with a towel or tissue as this may damage the unit.

STORAGE
Keep the appliance in a cool, dry place

REMOVING THE BATTERY

• Battery should be removed from the appliance before its utilization
• Unplug the appliance from mains socket and switch it off before removing the battery.

TROUBLESHOOTING

hair with the precision trimming head and move the appliance against the direction of hair growth. Make sure that the appliance is fully in contact with the skin

The appliance does not work as well as it should

| Hair may be stuck in the shaving head| Clean the shaving head (see chapter ‘Care and Cleaning’).
The battery is empty| Recharge the device
The appliance pulls out the hair.| You move the appliance too fast| Do not move the appliance too fast
The appliance works, but the result is uneven| You press the appliance onto the skin too hard| Do not press the appliance onto the skin too hard, as this may cause the hair length after shaving to be shorter than the indicated hair length.
The shaving head is not in full contact with the skin| When you use the device, always make sure it is fully in contact with the skin.
 |  | Always move the appliance against the direction of hair growth. As not all hair grow in the same direction, this means that you have to move the appliance up, down and sideways.
---|---|---
The appliance does not work| The battery is empty| Recharge the device

Skin irritation appears after shaving

| Shaving head (shaving surface) defective or dull| Replace the Shaving head (shaving surface)
The skin is not accustomed to the new device| It takes approximately 2-3 weeks for the skin to completely get

used to the new device

The device is not charging| Ambient temperature is not correct| Do not charge the device at temperatures below 0 oC or above 40 oC.
Usage time after fully charged is less than 60 minutes| Engine load increases if shaving head (shaving surfaces) has not been cleaned for long time| Clean shaving heads (shaving surfaces) and/or hair compartment

UTILIZATION RULES

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
For additional information about actual system of the garbage collection, address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

The symbol on the unit, packing materials and/or documentations means the battery used in this product not be toss in the garbage with ordinary household garbage.

www.timberk.ru

References

• Timberk - Официальный сайт бренда бытовой техники

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>