timberk T-SF1604RC Stand Fan Instruction Manual
- June 9, 2024
- TIMBERK
Table of Contents
INSTRUCTION MANUAL
T-SF1604RC
Dear customer!
We thank you for your wise choice and for a purchase of a stand fan. It will
serve you for a long time.
IMPORTANT INFORMATION
Please, read this manual before using the device. This manual contains
important information regarding your safety, as well as recommendations
concerning the correct
use and maintenance of this appliance. Keep this manual together with a
warranty card, cash register receipt and, if possible, carton and packaging
material. This instruction manual describes different types of this device.
The device you purchased may differ slightly from the description in the
manual, which does not affect the methods of use and operation. The
manufacturer reserves the right to make minor changes to the device without
additional notice which is not fundamentally affect its safety, performance
and functionality. There may be some misprints in text and digital notations
in the present manual.
IMPORTANT!
Important safeguards and descriptions contained in this manual do not include
all possible situations that you may experience using the device. The
manufacturer is not
responsible for damage of the appliance or its parts during transportation, as
a result of IM2022 incorrect installation or voltage fluctuations, as well as
when any part of the appliance has been changed or modified.
NOTE
There is a label on the device which has all the necessary technical data and
other useful information about the device. Use the appliance only for the
purpose specified in this manual.
SAFEGUARDS
When using an electric stand fan, a number of safety precautions must be
observed.
Improper operation by ignoring safety precautions can result in damage to the
health of the user and other people, as well as damage to their property.
- Important safeguards. read carefully and keep for future reference.
- Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
- Before connecting the appliance for the first time check that voltage indicated on the rating label corresponds to the mains voltage in your home.
- For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
- Do not use outdoors or in damp area.
- The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
- Children must be under control in order not to be allowed to play with the appliance.
- Always unplug the appliance from the power supply before cleaning and when not in use.
- To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
- Do not use the device in bathrooms and near water.
- Do not place the appliance near heat sources.
- Do not leave the appliance switched on when not in use.
- Do not use other attachments than those supplied.
- In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
- Keep the cord away from sharp edges and hot surfaces.
- Do not pull, twist, or wrap the power cord around the appliance.
- Avoid contact with moving parts of the device. Do not put pencils or other objects through the protective grid of the fan.
- Do not operate without fan installed protective grid.
- Ensure that the fan is switched off from the supply mains before removing the guard.
- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
APPOINTMENT OF THE DEVICE
The device is intended for air circulation in the room.
SPECIFICATIONS
Specifications of the device are shown in Table 1.
Table 1
| Parameter | Units | Technical parameters |
|---|---|---|
| Diameter | ” / cm | 16″ / 40 |
| Power | W | 60 |
| Voltage / frequency | V/ Hz | 220-240~/ 50 |
| Electrical safety class | – | Class II |
| Net weight | kg | 5.5 |
| Dimensions (WxDxH) | mm | 430х430х1350 |
DEVICE DESCRIPTION
Fig. 1
The appearance of the device may differ from the images in the manual
1. Front grille
2. Blades
3. Rear grille
4. Motor
5. Control box
6. Power cord
7. Nut| 8. Base nut
9. Base
10. Pole
11. Switch mode buttons
12. Motor shaft
13. Rear grille nut
14. Blade cap
---|---
DELIVERY SET
- Stand fan – 1 pc.
- Remote control – 1 pc.
- CR2025 battery – 1 pc.
- Instruction manual – 1 pc.
- Warranty card – 1 pc.
- Packing – 1 pc.
ASSEMBLING INSTRUCTIONS
- Fan is packed disassembled. Before assembling make sure that all the required parts are undamaged and included into the set.
- Do not plug in the device before its assembling is finished.
- Tighten stand tube to stand base with screw. Fix base cover to stand base with a screw (supplied with a set).
- Unscrew out-joint, put the stand cover and base cover on the stand base, pull the extension pole out then tighten the out-joint again.
- Place control box firmly on top of extension pole, tighten screw B.
- Unscrew the blade cap by turning clockwise and rear grill nut by turning counter clockwise and put both blade cap and rear grill nut off the motor shaft.
- Put rear grille on motor shaft.
- Secure it with rear grille nut.
- Slide blades on motor shaft so that claws on motor shaft match the blades slots.
- Screw blade cap on shaft by turning counter clockwise.
- Put front grille on rear grille and close clips or screw grille ring to secure grilles together.
- Adjust the fan vertically by vertical adjustment screw.
- The fan is ready for work.
OPERATION MANUAL
- CAUTION: To avoid electroconvulsive shock or fire danger, do not operate fan under the conditions of increased humidity.
- Place fan only onto dry flat unyielding surface.
Remote control
Press the latch on the battery case, remove the case Install the battery with
the “+” sign facing up. Use only CR2025 batteries
- To turn the device on/off, press the button on the control panel or on the remote control.
- The airflow rate is adjusted by pressing the button on the control panel or on the remote control.
I – low speed
II – medium speed
III – high speed
The corresponding indicator will be displayed on the control panel of the
instrument.
Battery disposal
Dispose of the battery according to local disposal laws. Do not short circuit
the battery, do not throw it into fire or water. Don’t throw it in the regular
trash.
Turn mode
To activate the rotation of the fan head, press the button on the control
panel or on the remote control.
Timer
To set the time to turn off the device, press the button on the control panel
or on the remote control. The time is set in the following sequence 0.5 h, 1
h, 2 h, 4 h, up to 7.5 h. The set time will be displayed on the instrument
panel.
Operating modes
The fan has three modes of operation:
Normal (continuous) – air is supplied at a constant speed Sleep (pulsating) –
the air speed increases and then decreases Natural (pulsating) – the principle
of operation is similar to the Sleep mode.
The mode is selected using the MODE button on the remote control or the fan
control panel.
MAINTENANCE
- Before cleaning unplug fan first.
- Clean front and rear grilles, blades, stand tube and stand base with soft moistened cloth and wipe dry.
- Do not use abrasive cleansers
STORAGE
- Keep the device in normal conditions in dry place.
UTILIZATI ON RULES
**** The symbol on the unit, packing materials and/or documentations means
used electrical and electronic units should not be toss in the garbage with
ordinary household garbage. These units should be pass to special receiving
point.
For additional information about actual system of the garbage collection,
address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work
on the public health and environment which happens with incorrect using
garbage
The symbol on the unit, packing materials and/or documentations means the
battery used in this product not be toss in the garbage with ordinary
household garbage.
After the lifetime of the device expires, it should be recycled in compliance
with the laws, rules and methods in region of recycling. Detailed information
about the recycling of the device, you can receive from a representative of
the local authorities, after providing full information about the device. The
manufacturer and authorized organization of the manufacturer do not carry
responsibility for the fulfillment by the Buyer of the requirements of
legislation on utilization and methods of utilization of the device selected
by the Buyer. The lifetime of the device is indicated in the warranty card.
Warranty period for the device and warranty terms are specified in the
warranty card. The warranty card is an integral part of the documentation
supplied with this unit. If there is no warranty card in the delivery set, ask
for it from the Seller. The warranty card provided by the Seller must conform
to the manufacturer’s form.
The manufacturer and the authorized organization of the manufacturer remove
responsibility for any possible harm which can be caused to people, animals or
property directly or indirectly, if this harm occurred as a result of
noncompliance with the rules and operating conditions, installation of the
device, intentional or reckless actions of the user- and / or third parties,
as well as in situations caused by natural and / or anthropogenic accidents.