BIXOLON XM7-30 3 Inch Mobile Label Printer User Manual

BIXOLON XM7-30 3 Inch Mobile Label Printer

Copyright

© BIXOLON Co., Ltd. All rights reserved.

This user manual and all property of the product are protected under copyright law.
It is strictly prohibited to copy, store, and transmit the whole or any part of the manual and any property of the product without the prior written approval of BIXOLON Co., Ltd.
The information contained herein is designed only for use with this BIXOLON product.
BIXOLON is not responsible for any direct or indirect damages, arising from or related to use of this information.

• The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
• All other brand or product names are trademarks of their respective companies or organizations.

BIXOLON Co., Ltd. maintains ongoing efforts to enhance and upgrade the functions and quality of all our products.
In the following, product specifications and/or user manual content may be changed without prior notice.

Caution

Some semiconductor devices are easily damaged by static electricity. You should turn the printer “OFF”, before you connect or remove the cables on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer “OFF”.

Manual Information

This WLAN manual provides information on the connection of wireless network with the mobile printer.

Precautions

1. The printer has to be within 100m(Out door) from AP(Access point) to connect WLAN. Although 35m is able to communicate in door, WLAN could be affected by environment to be shorten.
   The printer’s LCD shows the connection status of the wireless LAN.
   – Indicates that the wireless LAN is connected normally
   – Indicates that the WLAN password is wrong
   – Indicates that the AP of the set SSID is not nearby

2. The maximum separating distance may be shortened if transmission obstacles, such as cement walls, are present

3. If a device (such as a microwave oven, wireless LAN, etc.) that uses the same frequency is present, transmission may be interrupted. Separate the printer and Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.

How to Connect

WLAN can be configured through the printer’s WLAN interface. Likewise, WLAN can also be configured though the printer’s Serial/USB interfaces.
(1) Connecting Printer

1. Serial / USB cable
   Connect Serial/USB cable to Printer, PC device.
   When Serial cable use, baudrate between Device and printer should be the same.
2. WLAN
   Connect to the AP (Access Point) configured in Infrastructure mode in order to connect to the LAN/wireless network
   
   In order to configure the network between the wireless host device and the printer, set the printer to Soft AP Mode.
   

(2) Checking Network Setting

While the printer is turned off, turn on the printer while pressing the feed button.
The printer setting values will then be printed.

Android Soft AP mode (default)

1. Select “Wi-Fi”.

2. Select the printer to connect

3. Select “CONNECT”.

4. Wi-Fi communication is available.

iOS Soft AP mode (default)

1. Select “Wi-Fi”.

2. Wi-Fi ON and Select the printer to connect

3. Wi-Fi communication is available

How to change infrastructure mode

1. Enter the IP address of the printer in the address bar, and the following login window will pop up. Enter the ID and Password set for the printer, and then click [LOG IN] (Default User Name: admin, Password: password)

2. Select “Wireless” to change Wi-Fi mode.
   

3. Select “infrastructure”, and set SSID, WLAN Security Type.How to Connect

4. Reboot the Printer.

Factory Reset

This function changes the WLAN settings of the printer to the initial factory settings.

Method
Select the wireless interface on the printer’s LCD screen.

WLAN Factory reset is available in Interface > WLAN > WLAN Factory Reset
When the printer is turned off, the wireless LAN setting is applied as the factory default

Factory Reset Values

Network

| Network Mode| Soft AP mode
SSID| PRINTER_{MAC address}
Inactivity time| 10
IP Assignment Method| Manual (DHCP server)
IP, Subnet, Gateway| IP : 192.168.1.1
Subnet : 255.255.255.0
Gateway : 192.168.1.2

Specification

WPA1/2 – PSK
WPA 1/2 – Enterprise (EAP-TLS, EAP-TTLS, PEAP, LEAP, EAP-FAST)
Management| WLAN Configuration tool, HTTP, Smart connection APP

Revision History

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>