timberk TCH Q1 800 Infrared Heater Instruction Manual

timberk TCH Q1 800 Infrared Heater

Dear customer,
Thank you for your choice and purchasing this electric infrared heater. It will serve you well.

IMPORTANT INFORMATION

Before using the appliance, please carefully read this instruction manual. This instruction manual contains the important information on your safety, as well as some recommendations on proper use and maintenance of the appliance. Keep the instruction manual together with the warranty card, sales receipt and, if possible, cardboard package and packing material. This instruction manual describes different types of the appliance. The purchased appliance may somewhat differ from one described in the manual, but this does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the design of the product that do not fundamentally affect the safety, performance and functions of the appliance, without prior notice. The text and numbers in this manual may contain typing errors.
ATTENTION!
Important precautions and instructions given in this manual do not include all possible modes and situations, which can be encountered. The manufacturer is not responsible for damage to the appliance or its components during transportation, as a result of improper installation, voltage surges, as well as in the event of changes or modifications in any part of the appliance.
NOTE
There is a label on the product, which contains all the necessary technical data and other useful information about the appliance. Use the appliance only for its intended purpose as described in this manual.

PRECAUTIONS

When operating the electric infrared heater, observe safety rules. Improper installation or ignoring these rules can lead to harming health of the user and other people, as well as damage to their property. The manufacturer is not responsible for personal injury and property damage resulting from improper installation and operation of the appliance.

• Carefully read this manual before using the appliance, to avoid damage.

• Before first switching on, check the compliance of the technical specifications of the product with the parameters of the electric mains.

• Do not use outdoors or in high humidity conditions

• Always unplug the appliance before assembly, demounting and cleaning, or when not in use.

• Do not use accessories not included in the delivery set.

• When unplugging the appliance, do not pull the power cord but the plug. Do not twist or wrap it around anything.

• The temperature of the heating element during operation of the heater may reach very high values. To avoid burns, do not touch the appliance surface by hand and other body parts. It is also necessary to exclude the possibility of touching the heater radiating boards by a person (including accidental) via proper instructions and allocation of the heater in an inaccessible place.

• The heater should be placed far from curtains, flammable and easily deformable objects.

• The power cord should not contact sharp edges and hot surfaces.

• Make sure that the heater body and its radiating boards get cold before demounting and placing the heater to the package for long storage.

• During demounting of the heater or its movement, take special precautions to exclude hits of the appliance and its falling.

• When the heater is not used for a long time, keep it in dry cool place in the factory cardboard package. If the product was stored at a temperature below 0º C for some time, it should be held in room conditions for at least 2 hours before turning on.

• ATTENTION! DO NOT COVER THE APPLIANCE when it is switched on. Do not dry clothes or any other fabrics or materials on the appliance. This may lead to its overheating, breakdown or infliction of a significant damage to you and/or your property.
  ATTENTION!
  The manufacturer considers this type of failure as a nonguaranteed event.

• The heater should be connected to the electric mains equipped with an automatic circuit breaker.

• Never connect the heater to the electric mains, if its surface is moist (wet).

• Never try to repair the appliance yourself or replace any parts. If you detect any faults, please contact the nearest Service Center.

• It is prohibited to use the heater in rooms with explosive, dusty, or corrosive environment.

• Exclude operation of the heater without grounding.

• It is prohibited to switch on and use the heater with the removed cover.

• It is prohibited to install and use the heater in bathrooms, showers, or near swimming pools, where water jets and drops may directly get onto the appliance surface, when it is switched on.

• It is prohibited to use the heater in dusty rooms and during redecoration.

• It is prohibited to touch the heating element of the heater (switched on).

• Use the heater only as described in this manual. Any other use not recommended by the manufacturer may lead to fire, electric shock, or personal injury.

• Never clean the heater, when it is connected to the electric mains.

• For normal operation of the heater, the mains voltage should be sufficient, and the mains specifications should strictly correspond to the technical parameters indicated on the appliance body. If necessary, clarify the specifications of your mains from the electricity supplier.

• It is prohibited to install the appliance in immediate proximity to an electric socket. This may result in its overheating causing an emergency situation.

• The appliance is not designed for use by people (including children) with limited physical, sensory, or mental capabilities and having insufficient experience/knowledge, if they are not supervised and instructed on use of the appliance by a person responsible for their safety. It is necessary to watch that children do not play with the heater.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Cleaning and user maintenance shall not be made by children without supervision.

• Children of less than 3 years should be kept away unless continuously supervised.

• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

• Do not switch on the appliance with the damaged power cord or plug. If the power cord is damaged, it shall be replaced by the manufacturer, service center or similar qualified personnel to avoid hazards.

• Do not use this heater with a programmer, timer, separate remote control system, or any other appliance that automatically turns on the heater, due to the risk of fire in case of incorrect covering or installation of the heater.

• CAUTION! Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

• Warning! This heater is not equipped with a room temperature control unit. Do not use the heater in small rooms if the persons cannot leave the room on their own, unless continuous monitoring is provided.

• Explanation of pictograms:

  • Caution! Hot surface
  • Attention! Do not cover

INTENDED USE

The electric infrared heater is designed for general, additional or local heating of residential and production premises of all types. This heating appliance is effective and efficient in use due to the minimal energy losses.

TECHNICAL SPECIFICATIONS

Main features

Thanks to its up-to-date design, the infrared heater is convenient for placement in any room where additional air heating is required.
Technical specifications
Technical specifications of the infrared heater are given in Table 1.

NOTE:
Heated area in the table is indicated for reference, since it depends both on the heater power, and on the room type, ceiling height, wall/ceiling materials, number and area of glazing, presence of doors, etc.

DESCRIPTION

1. On/off switch
2. Appliance body
3. Heating eleme

DELIVERY SET

1. Infrared heater – 1 pc.
2. Package – 1 pc.
3. Instruction manual – 1 pc.
4. Warranty card – 1 pc.

OPERATION

Control panel

1. Turn on/off
2. Power selection

Power by enabled modes

• I- ~ 400 W
• II- ~ 800 W

Heater Operation

1. Place the device on a flat, solid surface
   Attention: The device has a fall protection sensor, so it works only in a vertical position while standing on a hard and flat surface.

2. Plug the power cord into the electric outlet. Do not use the appliance on uneven surfaces, near flammable or easily deformable objects.

3. Choose a comfortable heating mode by setting the power switch to the required position.

NOTE:
During the first use, there may be a smell and smoke. Do not worry, this means that a drop of oil has fallen on the heating element during production. The drop will quickly evaporate – the appearance of smell and smoke will no longer occur.

MAINTENANCE

Prior to preventive cleaning, make sure that the switch is in the “O” (OFF) position and the appliance is unplugged from the electric mains.
Regular cleaning recommendations:

• Switch off the appliance, unplug it from the electric mains and let the unit cool down. Clean the unit’s body with a soft, slightly damp cloth.
• It is not recommended to use detergents, including materials containing abrasive elements.
• Do not damage the unit’s surface by sharp objects.

TROUBLESHOOTING

Possible malfunctions and methods of removal are given in Table 2.
If you are not able to remedy a malfunction according to the recommendations or other malfunctions occur, contact the authorized service center.

service center
Low voltage in the electric mains| Check voltage in the electric mains
The heater does not work| No voltage in the electric mains| Check presence of voltage in the electric mains
Breakdown of the electric cable| Check integrity of the electric cable and if necessary replace it, contact the authorized service center
The automatic circuit breaker of the electric mains is faulty| Check operability of the automatic circuit breaker and replace the faulty circuit breaker if necessary
Breakdown in the heating element circuit| Contact the authorized service center

UTILIZATION RULES

After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device. The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.
The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents.

www.timberk.ru

References

• Timberk - Официальный сайт бренда бытовой техники

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>