ExcelSecu ESCS-WD30 2.4G Adapter User Guide
- June 9, 2024
- ExcelSecu
Table of Contents
ExcelSecu ESCS-WD30 2.4G Adapter
ESCS-WD30 User Guide
This user guide is for ESCS-WD30 2.4G Adapter users only. Please read and save
this manual carefully before use for future reference.
Excelsecu Data Technology Co., Ltd.
www.excelsecu.com
Packing list
ESCS-W30 …… 1
ESCS-WD30 2.4G Adapter …… 1
User Guide …… 1
Product instruction
How to use
- This equipment must be used with ESCS-W30 wireless Barcode Scanner.
- Plug the USB ESCS-WD30 2.4G Adapter into the USB of the PC, and the ESCS-W30 will automatically connect with the ESCS-WD30 through 2.4G, so as to transmit the scanned code value to the PC.
Maintenance
- The shell of the device can be wiped with a clean soft cloth. If needed, user can use a small amount of detergent add to water, and wipe with a soft cloth.
Specification
| Model | ESCS-WD30 |
|---|---|
| Dimension | 1915.16mm |
| Material | ABS |
| Working Voltage | **** |
DC 5V ± 0.25V
Working
Current
| ****
<260mA
---|---
Connection| USB
Environmental Parameter
| Working Temperature:-10℃~50℃
Storage Temperature: -20℃~60℃
Working Humidity:
5%RH~95%RH(Non-condensing)
Drop Test: 1.5m
Certificate| CE, FCC, RoHS, WEEE
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>