Excelsecu Data Technology ESCS-W20 Wireless Code Scanner User Manual
- June 5, 2024
- Excelsecu Data Technology
Table of Contents
Excelsecu Data Technology ESCS-W20 Wireless Code Scanner
User Manual
Statement
- The Company does not assume any responsibility for damage caused by use in unstated conditions in this manual.
- The Company does not assume any responsibility for damage or problem caused by the use of accessories not approved or provided by our company.
- The Company has the right to upgrade and improve the product without prior notice and the right to modify this document.
Product Features
- Ergonomic design, easy to use.
- Supported both USB wired connection and Bluetooth/2.4G wireless connection.
- High-performance scan reader, easily read 1D and 2D barcodes on paper or LED screen.
- Transmission distance can reach up to 100m via a 2.4G wireless connection.
- A large capacity rechargeable battery lasts a long continuous working time.
- Stable and durable, applying to flexible workplaces.
- Compatible with Windows, Linux, Android, and iOS.
Warnings
- DO NOT use in any potentially explosive gas or contact with a conductive liquid.
- DO NOT disassemble or modify this product.
- DO NOT aim the device window direct at sunlight or high-temperature objects.
- DO NOT use the device in an environment with high humidity, excessively low or high temperatures, or electromagnetic radiation.
Quick Guide
- Plug the USB receiver into the host device or connect the scanner with your device via USB cable, press the button on the scanner, when the beeper prompts, the scanner enters scanning mode.
- When the blue LED light on the scanner blinks, the scanner is in Bluetooth standby mode, you can search for the scanner named BARCODE SCANNER on your mobile phone or PC and connect to it via Bluetooth. When the blue LED is steady on, the scanner connects successfully and enters scanning mode.
- When Bluetooth and 2.4G are connected at the same time, Bluetooth transmission is preferred
- Users can scan the QR code below to change the setting of the scanner.
LED tips
| LED status | Description |
|---|---|
| Steady red light | Battery charging mode |
| The green light flashes one time | Scanning successfully |
| Blue light flashes every second | Waiting for Bluetooth connection |
| Steady blue light | Bluetooth connected successfully |
Buzzer tips
| Buzzer status | Description |
|---|---|
| Continuous short beep | 2.4G receiver pairing mode |
| One short beep | Bluetooth connected successfully |
| One long beep | Enter power-saving sleep mode |
| Five beeps | Low power |
| One beep | Reading successfully |
| Three beeps | Fail to upload data |
Receiver pairing
Pair scanner to 2.4G receiver, scan the QR code below, the scanner enters pairing mode, then plug the USB receiver into your PC, and the pairing will complete automatically. ( The receiver shipped with the product is already paired by factory default)
System settings
Buzzer setting
Sleep time setting
Scan the sleep time setting QR code to enable time setting, and then scan the time QR code you want to set.
Scanning mode
**Storage
mode: scan and store barcode inside the scanner, and upload the data to your
device when you need it by scanning the “Upload data” code.
Data management
Terminators
Barcode Type
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.