TENSEGRITY SHS2238 Smart LED Desk Lamp with Wireless Charger User Guide
- June 10, 2024
- TENSEGRITY
Table of Contents
TENSEGRITY SHS2238 Smart LED Desk Lamp with Wireless Charger
Product Structure
Instructions
- when using this product, please use the output voltage of DC 5V / 3A or quick charge DC9V/1.67A
- When using wireless charging, in order to achieve the best use effect and higher charging efficiency, it should be noted that the wireless receiving position of the mobile terminal must be in full contact with the wireless charging icon on the product surface and located in the central area.
Attention
-
This product is for indoor use only.
-
Do not place metal products between the wireless charging area and the charging phone.
-
The lamp may be turned on or off under the strong electromagnetic interference.
-
The light source of this lamp is not replaceable; When the light source comes to its end, the whole lamp should be replaced.
-
Please be sure to check whether the charging device is compatible with the voltage of the product when using it.
-
When using, charging or storing the product, if there is abnormal odor, tempera- ture is too high (the temperature is slightly higher in normal use but should not be hot), color or shape change or other abnormal phenomena, the product should be stopped immediately and the distributor should be contacted.
-
When using this product to charge mobile phones and digital
devices, please confirm that the charged device is in charging state, so as to ensure the normal operation of this product. -
Improper use or improper placement of the product or material consumption by the user may lead to the product life reduction or damage, so the responsibility, does not belong to the warranty responsibility, please understand!
Operating function
-
Desk lamp function:
Put the product on the table and plug in the USB-type C data cable to power on.
Red indicator light, enter standby state, first touch the switch position, turn on the upper light, touch the switch again, the upper light off switch to the lower light on; Continue to touch the switch lights up and down at the same time, touch the final light off mode loop. -
Wired and wireless charging function operation:
After connecting the Type-C data charging cable and power adapter with the product and powering on:-
A• According to different types of mobile phone ports, insert the matching USB charging cable into the USB charging port on the base to charge the phone directly.
-
B• Wireless charging is designed in the form of a detachable wireless charging box, which can be inserted along the chute and combined into an integrated base, or inserted into the Type-C charging cable after pulling out along the chute, and connected with a USB power supply or quick charging source adapter larger than 2A to become a pocket flat wireless charging box.
Easy to carry in a variety of occasions to use. -
C• Wireless charging box indicator display information:
-
Green light is steady on – – wireless charging power is on
-
Blue breathing light — wireless charging works normally (the charging icon on the mobile phone shows that the charging is in progress)
The green light is on again – the battery is fully charged and the charge is finished. -
Blue light flashing — FOD on detection alarm, wireless charging emission position of metal foreign body
-
Directions for use
- When using this product, use an adapter with output voltage of DC 5V/3A or quick-charge DC 9V/1.68A
- When the power adapter and Type-C charging cable with actual power less than 15W current 3A are used for emergency use, exceptions may occur the performance or parameters of the product may be unstable due to insufficient power supply). Not product failure, belongs to improper use.
- When using wireless charging, in order to achieve the best use effect and higher charging efficiency, the wireless receiving position of the mobile terminal should be moved to overlap with the wireless charging transmitting position of the product.
Functions
- 10W wireless output, put it on and charge at any time.which is compatible with 7.5w and 5W downwards
- Safe charging, compatible with mainstream models
- Intelligent recognition foreign body safe and secure
- Smart current & overcharge protection
- LED night- light lighting, energy efficient
- Simple design, stylish and beautiful
Specifications
FAQ & Warnings
- Do not place the product in water, fire, high temperature (> 45°C) and low temperature (< -10°C). Do not give the product to children, especially do not let them touch the accessories.
- Please do not disassemble or modify the product, so as notto damage the protective device of the product, which may lead to wire heating, fire or explosion
- Please do not throw, bump or rub the product violently, which will cause the product sag,perforation, cracking, deformity, corrosion and other abnormal phenomena. Please stop using the product immediately.
- Please use a soft dry cloth to clean the surface without using chemicals, soap or detergent.
Non-product quality problems, due to human damage, such as: product shell damage, wear, crack, fracture, broken skin, rupture, deformation, liquid injection, etc.; Damage caused by disassembly or disassembly without authorization by the repairman of the company;
The product exceeds the warranty period; The contents on the vouchers of the three guarantees do not conform to or are altered in accordance with the marks on the real goods; without three guarantees or valid invoices; Damage is caused by other force majeure factors.
FCC STATMET
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consultthe dealer or an experienced radio/TV technician for help.