Nobsound M3 Channel Digital Amplifier Instructions
- June 16, 2024
- Nobsound
Table of Contents
Nobsound M3 Channel Digital Amplifier
Product Information
Specifications:
- Product Name: 2.0 Channel Digital Amplifier
- Power Output: 50W+50W
Front Panel Introduction:
The front panel of the amplifier features the following:
- /FYUTPOH
- NN69JOQVU
- 1PXFSCVUUPO MPOHQSFTT
- 1MBZQBVTF TIPSUQSFTT
-
BTTLOPC
- .BJOWPMVNFLOPC
- 1SFWJPVTTPOH
- 5SFCMFLOPC
- %JTQMBZTDSFFO %JTQMBZ.BJOWPMVNFCBTTUSFCMFQMBZCBDLQSPHSFTT
- *OQVUJOEJDBUPS #MVF#MVFUPPUIJOQVU TUFBEZPOBGUFS TVDDFTTGVMDPOOFDUJPO
- (SFFO69JOQVU
Product Usage Instructions
Front Panel Controls:
To use the front panel controls, follow these steps:
- Turn on the amplifier by pressing the /FYUTPOH button.
- Adjust the volume by using the NN69JOQVU knob.
- Connect your audio source to the 1PXFSCVUUPO MPOHQSFTT input.
- Toggle between different sound modes using the 1MBZQBVTF TIPSUQSFTT button.
- Adjust the bass and treble levels using the #BTTLOPC and BJOWPMVNFLOPC knobs respectively.
- Switch between different audio inputs using the 1SFWJPVTTPOH button.
- Enable or disable the surround sound mode using the 5SFCMFLOPC button.
- Adjust the balance between left and right channels using the %JTQMBZTDSFFO %JTQMBZ.BJOWPMVNFCBTTUSFCMFQMBZCBDLQSPHSFTT knob.
- Use the *OQVUJOEJDBUPS #MVF#MVFUPPUIJOQVU TUFBEZPOBGUFS TVDDFTTGVMDPOOFDUJPO button to access additional features and settings.
- Turn off the amplifier by pressing the (SFFO69JOQVU button.
Rear Panel Introduction:
The rear panel of the amplifier features the following:
- 3JHIUDIBOOFM -FGUDIBOOFM
- 6EJTLJOQVU TVQQPSU.11&’-$87GPSNBUT
Connection Diagram:
Refer to the following diagram for connecting your devices:
FAQ (Frequently Asked Questions)
Q: What is the power output of the amplifier?
A: The amplifier has a power output of 50W+50W.
Q: How do I adjust the volume?
A: You can adjust the volume by turning the NN69JOQVU knob on the front
panel.
Q: How do I switch between different audio inputs?
A: Use the 1SFWJPVTTPOH button on the front panel to toggle between
different audio inputs.
2.0 Channel Digital Amplifier
50W+50W
Front Panel Introduction
(Display Main volume / bass / treble / playback progress / the order of the current playback song / the number of total songs) 3.31 means the 3rd minute and 31st second of the song, only display single digit of the minute
Rear Panel Introduction
Power input: DC 12V-24V
This amplifier requires 50W power supply at minimum, its auto power-off during
use means that your speaker needs high power supply to drive, please turn down
the volume or change another power supply with higher output.
Connection Diagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>