TRAXXAS 70054-8 1 16-Scale Pro 4X4 Short Course Racing Truck Instructions

June 15, 2024
Traxxas

TRAXXAS logo 1/16 Slash® 4X4 (Model 70054-8) Parts List

Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.

Bearings & Bushings

5124 Ball bearings, blue rubber sealed (4x7x2.5mm) (2)
7019 Ball bearings, blue rubber sealed (4x8x3mm) (2)
7020 Ball bearings, blue rubber sealed (8x12x3.5mm) (2)
5114 Ball bearings, blue rubber shield (5x8x2.5mm) (2)

Body & Accessories

1926 Antenna caps, vinyl (2)/ antenna spool
1726 Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
1834 Body Clips (12) (standard size)
7015 Body mounts, front & rear/ body mount posts, front & rear
4915 Body washers, foam adhesive (10)
6716 Body washers, Foam, 2mm/3mm/4mm
7027X Body, 1/16 Slash 4X4, ProGraphix® (graphics are printed, requires paint

& final color application))/ decal sheet
7012R| Body, 1/16 Slash 4X4 (clear, requires painting)/ grille, lights decal sheet
7027-BLK| Body, 1/16 Slash 4X4, black (painted, decals applied)
7027-RED| Body, 1/16 Slash 4X4, red (painted, decals applied)
2514| Decal sheet, racing sponsors
9950| Official Team Traxxas® racing decal set(flag logo/ 6-color)

Bumpers & Skidplates

7035 Bumpers, front (1)/ rear (1)/ 2.5X14mm CS (2) (1/16 Slash)
7037 Skidplate set, front (1)/ rear (1)/ transmission (1) (black)/ Guards,

steering servo (2) / cover plate, steering servo (1)

Chassis & Attachments

7015 Body mounts, front & rear/ body mount posts, front & rear
7024X Box, receiver (sealed)/ wire cover/ foam pads, upper & lower/ silicone

grease/ 2.5×8 CS (4)/ 3×4 GS (1)
7023| Bulkhead tie bars, front & rear (blue-anodized aluminum)/ 2.5×6 CS (1)
7030X| ulkhead, front (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1)
7029X| Bulkhead, rear (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS(1)
7022| Chassis
7026|  Door, battery compartment (1)/ vents, battery compartment (1 pair) (fits right or left side)
7025| Seal kit, receiver box (includes o-ring, seals, and silicone grease)
7037| Skidplate set, front (1)/ rear (1)/ transmission (1) (black)/ Guards, steering servo (2) / cover plate, steering servo (1)
7043| Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front & rear/ 2.5x18mm CS (4)

Differential Components

7019 Ball bearings, blue rubber sealed (4x8x3mm) (2)
7020 Ball bearings, blue rubber sealed (8x12x3.5mm) (2)
7080 Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/

2x14mm BCS (3)
7078| Differential assembly, complete
7014| Differential kit, center (complete for 1/16 E-Revo, 1/16 Slash)
7381| Differential locker, (2)
5136X| Differential oil kit (1 each: 10K, 30K, 50K weights)
7082| Gear set, differential (output gears (2)/ spider gears (3))/ differential output shafts (2)/ 1.5x6mm pin (3)/ 1.5x8mm pin (2)
5130| Oil, differential (100K wt) (0.7 oz (20cc))
5135| Oil, differential (10K wt) (1.7 oz (50cc))
5136| Oil, differential (30K wt) (1.7 oz (50cc))
5137| Oil, differential (50K wt) (1.7 oz (50cc))
7014X| Rebuild kit, center differential (1/16 E-Revo/Slash) (includes orings and diff gear covers)
7079| Ring gear, differential/ pinion gear, differential

Driveline Components

7034 Axle carriers, left & right (2 each)
7052 Drive cups, inner (2) 1/16 E-Revo/Slash (steel constant-velocity

driveshafts)
7051| Driveshaft assembly (1)  left or right (1/16 Slash) (fully assembled, ready to install)/ 3x10mm screw pin (1)
7051X| Driveshaft, 1/16 Slash (steel constant-velocity) (assembled) (4)
7053| Driveshaft, steel constant-velocity, 1/16 Slash (shaft only, 48mm)/ drive cup pin (1)
7250R| Driveshafts, center (steel constant-velocity) front (1), rear (1) (fully assembled)
7056| Half shafts, center front (1), center rear (1) (internal splined half shafts (2)/external splined half shaft) (2))/ metal u-joints (4)
7050| Half shafts, left or right (1/16 Slash)(internal splined half shaft (2)/external splined half shaft) (2))/ metal u-joints (4)
7055| Rebuild kit (for 1/16 E-Revo/Slash steel constant-velocity driveshafts) (includes pins, o-rings, stub axles for driveshafts
assemblies)
7054| Stub axle, steel (2)/ yokes (2) (assembled)
7154| Wheel hubs, hex (4)/ axle pins (1.5x8mm) (4)
7154X| Wheel hubs, hex, aluminum (4) (blue-anodized)
7057| Yokes, differential and transmission (2)/ 3x10mm screw pin (2)

Front Suspension

7033X| Aluminum caps, pivot ball (threaded aluminum, hard-anodized, PTFE- coated (8)/ hex wrench, 5mm
---|---
7034| Axle carriers, left & right (2 each)
7023| Bulkhead tie bars, front & rear (blue-anodized aluminum)/ 2.5×6 CS (1)
7030X| Bulkhead, front (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1)
7028| Hollow balls (20)
7028X| Hollow balls, steel (machined) (22)
7033| Pivot balls (4)/ pivot ball caps (4)
7018| Push rod (molded composite) (4)/ hollow balls (8) (1/16 Slash)
7018X| Push rods, aluminum (red-anodized) (4) (assembled with rod ends) (1/16 Slash)
7155| Rocker arm post, steel (4)
7158| Rocker arm set, progressive-2/ 4x7x2.5mm PB (8)
2523| Screws, 2.5×10 countersunk machine (hex drive) (6)
7043| Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front & rear/ 2.5x18mm CS (4)
7031| Suspension arm set, front (includes upper right & left and lower right & left arms)
7021| Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4)
7038| Toe link, front & rear (molded composite) (4)/ hollow balls (8) (1/16 Slash)
7038X| Toe links, aluminum (red-anodized) (4) (assembled with rod ends and threaded inserts) (1/16 Slash)

Hardware

5124 Ball bearings, blue rubber sealed (4x7x2.5mm) (2)
7019 Ball bearings, blue rubber sealed (4x8x3mm) (2)
7020 Ball bearings, blue rubber sealed (8x12x3.5mm) (2)
5114 Ball bearings, blue rubber shield (5x8x2.5mm) (2)
5123 Bellcrank bushings (plastic) (4x7x2.5mm) (4)
1834 Body Clips (12) (standard size)
2545 Bushings (plastic) (5x8x2.5mm) (4)
5150 E-clips, 1.5mm (24)
5477 Flat wrench, 5mm (blue anodized aluminum)
7028 Hollow balls (20)
7028X Hollow balls, steel (machined) (22)
2745 Nuts, 3mm nylon locking (12)
1747P Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)
3647 Nuts, 4mm flanged nylon locking (steel, serrated) (8)
1747R Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747G Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1747T Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)
1747A Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)
7155 Rocker arm post, steel (4)
7059 Rod ends (8)/ hollow balls (8) (fits 1/16 and 1/18 accessory suspension

links)
2523| Screws, 2.5×10 countersunk machine (hex drive) (6)
3229| Screws, 2.5x10mm cap-head machine (hex drive) (6)
2526| Screws, 2.5×12 countersunk machine (hex drive) (6)
3236| Screws, 2.5x12mm cap-head machine (6)
3215| Screws, 2.5x6mm cap-head machine (hex drive) (6)
3965| Screws, 2.5x8mm cap-head machine (6)
2577| Screws, 3x10mm button-head machine (hex drive) (6)
3159| Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench
2578| Screws, 3x12mm button-head machine (hex drive) (6)
2579| Screws, 3x15mm button-head machine (hex drive) (6)
2575| Screws, 3x6mm button-head machine (hex drive) (6)
2576| Screws, 3x8mm button-head machine (hex drive) (6)
2743| Set (grub) screws, 3mm hardened (12)

Motors & Electronics

2082A Gear set (for 2080A waterproof micro servo)
2082R Gear set, metal (for 2080R waterproof micro servo)
2082X Gear set, metal (for 2080X waterproof micro servo)
3374 Heat sink, Velineon® 380 brushless motor, aluminum (blue- anodized)
7060 Motor mount, finned aluminum
7360 Motor mount, finned aluminum (for 550 motors)
3785 Motor, Titan® 12T (12-Turn, 550 size)
3371 Motor, Velineon® Mini Maxx® 380, brushless (assembled with 16-gauge wire

and gold-plated connectors)
2081A| Servo case/ gaskets (for 2080A micro waterproof servo)
2081X| Servo case/ gaskets (for 2080X metal gear, micro, waterproof servo)
2080A| Servo, micro, waterproof
2080X| Servo, micro, waterproof, metal gear
2080R| Servo, micro, waterproof, metal gear
3370| Velineon® VXL-3m Brushless Power System, waterproof (includes waterproof VXL-3m ESC and Velineon® 380 motor)
3375| VXL-3m Electronic Speed Control, waterproof (brushless)
3024R| XL 2.5 Electronic Speed Control, waterproof With Low Voltage Detection

Radio System, Batteries & Chargers

2820X 2200mah 7.4v 2-Cell 25C LiPo Battery
2976 AC to DC adapter
2938X Adapter, Traxxas® iD® LiPo battery (adapts Traxxas® iD® batteries to

separate balance ports)
2943| Battery charge indicators, green (4), grey (4), blue (4)
6548| Battery door, TQ 2.4 transmitter (replacement for #6516, 6517 transmitter)
2914| Battery, Power Cell AA Alkaline (4)
2925X| Battery, Series 1 Power Cell, 1200mAh (NiMH, 6-C flat, 7.2V, 2/3A)
2974| Charger, D/C, 2 amp (5 – 7 cell, 6.0 – 8.4 volt, NiMH)
2972| Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification
2973| Charger, EZ-Peak Live Dual, 200W, NiMH/LiPo with iD Auto Battery Identification
2970| Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery Identification
2981| Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto Battery Identification
2985| Charger, EZ-Peak®, USB-C, 40W, NiMH/LiPo with iD® Auto Battery Identification
2949| Charger, USB-C, 20W (5 – 7 cell, 6.0 – 8.4 volt, NiMH) (with iD®)
2982| Charger, USB-C, 40W (6 – 7 cell, 7.2 – 8.4 volt, NiMH) (with iD®)
2978| Fuse, D/C charger, 5A (2) (for #2974, 2975, 2977)
2082A| Gear set (for 2080A waterproof micro servo)
2082R| Gear set, metal (for 2080R waterproof micro servo)
2082X| Gear set, metal (for 2080X waterproof micro servo)
2968X| LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries)
2968| LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries)
6535| Mount, temperature sensor (electric motors)/ wire tie/ thermal pad
2912| Power adapter, AC, USB-C (45W)
2916| Power cable, USB-C, 100W (high output)
6519| Receiver, micro, TQ 2.4GHz (3-channel)
6533| Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)
6522| Sensor, RPM (short)/ 3x4mm BCS (1)/ 3×4 GS (1)
6523| Sensor, temperature and voltage (short)
2081A| Servo case/ gaskets (for 2080A micro waterproof servo)
2081X| Servo case/ gaskets (for 2080X metal gear, micro, waterproof servo)
2080A| Servo, micro, waterproof
2080R| Servo, micro, waterproof, metal gear
2080X| Servo, micro, waterproof, metal gear
6538| Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3)
6540| Telemetry trigger magnet, 5X2mm (1)
6509R| TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver)
6507R| TQi 2.4 GHz High Output radio system, 4-channel with Traxxas® Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro receiver)
6516| Transmitter, TQ 2.4GHz, 2-channel (transmitter only)
6528| Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 2- channel (transmitter only)
6529| Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 3- channel (transmitter only)
6530| Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4- channel (transmitter only)
6511| Traxxas® Link Bluetooth® module
3375| VXL-3m Electronic Speed Control, waterproof (brushless)
3064X| Wire harness, parallel battery connection (compatible with
Traxxas® High Current Connector, NiMH only)
3024R| XL 2.5 Electronic Speed Control, waterproof With Low Voltage Detection

Ready-To-Race Model

70054-8| Slash®: 1/16-Scale Pro 4X4 Short Course Racing Truck with TQ™ 2.4GHz radio
---|---

Rear Suspension

7033X| Aluminum caps, pivot ball (threaded aluminum, hard-anodized, PTFE- coated (8)/ hex wrench, 5mm
---|---
7034| Axle carriers, left & right (2 each)
7023| Bulkhead tie bars, front & rear (blue-anodized aluminum)/ 2.5×6 CS (1)
7029X| Bulkhead, rear (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1)
7028| Hollow balls (20)
7028X| Hollow balls, steel (machined) (22)
7033| Pivot balls (4)/ pivot ball caps (4)
7018| Push rod (molded composite) (4)/ hollow balls (8) (1/16 Slash)
7018X| Push rods, aluminum (red-anodized) (4) (assembled with rod ends) (1/16 Slash)
7155| Rocker arm post, steel (4)
7158| Rocker arm set, progressive-2/ 4x7x2.5mm PB (8)
2523| Screws, 2.5×10 countersunk machine (hex drive) (6)
7043| Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front & rear/ 2.5x18mm CS (4)
7032| Suspension arm set, rear (includes upper right & left and lower right & left arms) (1/16 Slash)
7021| Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4)
7038| Toe link, front & rear (molded composite) (4)/ hollow balls (8) (1/16 Slash)
7038X| Toe links, aluminum (red-anodized) (4) (assembled with rod ends and threaded inserts) (1/16 Slash)

Shock Oil

5031 Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
5032 Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
5033 Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
5034 Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
5035 Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
5036 Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
5037 Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
5029 Shock oil bottle (60cc) (for mixing shock oil)
5038X Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80

wt premium shock oils with spinning carousel rack)
5038| Spinning carousel rack

Shocks (GTR)

7066 Body, GTR shock (molded composite) (2)
7065 Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/

bottom cap (2)/ upper retainer (2)/ lower retainer (2)
7028| Hollow balls (20)
7067| Piston, damper (2×0.5mm hole, red) (4)/ travel limiters (4)
7062| Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e- clips, shock rod ends, hollow balls) (renews 2 shocks)
7063| Shaft, GTR shock (2)
7063T| Shaft, GTR shock (TiN-coated) (4)
7061| Shocks, GTR composite, 1/16 E-Revo/Slash (assembled, without springs) (2)
7061X| Shocks, GTR hard anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (4)

Slipper Clutch Components

7152| Slipper clutch, complete (includes slipper clutch hub, clutch pad, spring, 3.0mm NL, 1.5x6mm pin)
---|---

Springs

7140 Spring, shock (GTR) (0.82 rate, double orange) (1 pair)
7141 Spring, shock (GTR) (0.88 rate, double green) (1 pair)
7142 Spring, shock (GTR) (1.02 rate, double tan) (1 pair)
7143 Spring, shock (GTR) (1.15 rate, double black) (1 pair)

Spur Gears & Pinion Gears

2428 Gear, 12-T pinion (48-pitch) (fits 3mm shaft)/ set screw
2416 Gear, 16-T pinion (48-pitch) / set screw
1918 Gear, 18-T pinion (48-pitch) / set screw
2419 Gear, 19-T pinion (48-pitch) / set screw
2423 Gear, 23-T pinion (48-pitch) (fits 3mm shaft)/ set screw
2426 Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw
4728 Gear, 28-T pinion (48-pitch) (fits 3mm shaft)/ set screw
2431 Gear, 31-T pinion (48-pitch) (fits 3mm shaft)/ set screw
4725 Gear, pinion (25-tooth) (48-pitch) / set screw
7045R Spur gear, 45-tooth
7046R Spur gear, 50-tooth
7047R Spur gear, 55-tooth

Steering Components

5114 Ball bearings, blue rubber shield (5x8x2.5mm) (2)
2545 Bushings (plastic) (5x8x2.5mm) (4)
7043 Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/

servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front & rear/ 2.5x18mm CS (4)
7038| Toe link, front & rear (molded composite) (4)/ hollow balls (8) (1/16 Slash)
7038X| Toe links, aluminum (red-anodized) (4) (assembled with rod ends and threaded inserts) (1/16 Slash)

Suspension Linkage

7028 Hollow balls (20)
7028X Hollow balls, steel (machined) (22)
7018 Push rod (molded composite) (4)/ hollow balls (8) (1/16 Slash)
7018X Push rods, aluminum (red-anodized) (4) (assembled with rod ends) (1/16

Slash)
7021| Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4)
7038| Toe link, front & rear (molded composite) (4)/ hollow balls (8) (1/16 Slash)
7038X| Toe links, aluminum (red-anodized) (4) (assembled with rod ends and threaded inserts) (1/16 Slash)

Tires & Wheels

7073A| Tires & wheels, assembled, glued (SCT satin chrome wheels, red beadlock style, SCT off-road racing tires, foam inserts) (1 each, right & left)
---|---
7073| Tires & wheels, assembled, glued (SCT satin chrome wheels, SCT off-road racing tires, foam inserts) (1 each, right & left)
7071| Tires, off-road racing, SCT dual profile (1 each right & left)/ foam inserts (2)
7154| Wheel hubs, hex (4)/ axle pins (1.5x8mm) (4)
7154X| Wheel hubs, hex, aluminum (4) (blue-anodized)
7072A| Wheels, SCT satin chrome, red beadlock style, dual profile (1.8″ inner, 1.4″ outer) (2)

Transmission Components

7077R| Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1)
---|---
7379R| Cover, gear/motor plate access cover/ motor mount hinge post / 3x10mm CS w/split and flat washers (1) / 2.5x4mm CS (2) / 3x8mm BCS (1) (for 550 motors)
7014| Differential kit, center (complete for 1/16 E-Revo, 1/16 Slash)
7093| Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin)
7091| Gearbox halves, front & rear
7092| Input shaft/ output shaft
7090| Plate, motor
7380| Plate, motor (for 550 motor)
7014X| Rebuild kit, center differential (1/16 E-Revo/Slash) (includes o- rings and diff gear covers)
7152| Slipper clutch, complete (includes slipper clutch hub, clutch pad, spring, 3.0mm NL, 1.5x6mm pin)
7095| Transmission, complete (fits 1/16-scale brushed models)

Traxxas Tools

3433X Body reamer (aluminum handle)
3433 Body reamer (plastic handle)
3436 Cap, body reamer
3432 Scissors, curved tip
3431 Scissors, straight tip
8712 Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium

handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4” drive
8720| Speed bit handle, large (overmolded)
8721| Speed bit handle, medium (one piece)
8722| Speed bit handle, premium (rubber overmold)
8710| Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4” drive
8711| Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4″ drive
8719| Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm,
5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4″ drive
8716| Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4″ drive
8716X| Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4″ drive
8715| Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4″ drive
8715X| Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4″ drive
8714| Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4″ drive
2748R| Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench)
3415| Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/4mm. 5mm, 5.5mm, 7mm, and 8mm nut drivers/ 2mm, 3mm, and 4mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrenches/ driver handle)

Turnbuckles & Threaded Rods

7028 Hollow balls (20)
7028X Hollow balls, steel (machined) (22)
7018 Push rod (molded composite) (4)/ hollow balls (8) (1/16 Slash)
7018X Push rods, aluminum (red-anodized) (4) (assembled with rod ends) (1/16

Slash)
7038| Toe link, front & rear (molded composite) (4)/ hollow balls (8) (1/16 Slash)
7038X| Toe links, aluminum (red-anodized) (4) (assembled with rod ends and threaded inserts) (1/16 Slash)

TRAXXAS logoIf you have questions or need technical assistance, call Traxxas at:
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
For orders, calls outside the U.S., and other information, call 972-549-3000,
or fax to 972-549-3011 e-mail Traxxas at support@Traxxas.com
TRAXXAS.com
REV. 231115 1611

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals