JBH FDB05A Compact Mobility Scooter User Manual
- June 9, 2024
- JBH
Table of Contents
FDB05A Compact Mobility Scooter
User’s Manual
Venture CTS200
FDB05A
BE FREE BE EASY BE YOUR LIFE
The company reserves the right to make any change and improvement without
prior notice. It reserves and also the property of models and forbids their
reproduction, even partial.
PREFACE
Dear Users,
We thank you very much for your choice of JBH Medical. The manual is to assist
you operating and maintaining the scooter, please go through it with necessary
information in mind prior to use the scooter. Any problem which is not cover
in here or any confusion of the manual, feel free to communicate with your
local dealers or distributors. Alternatively, you can direct contact with JBH
Medical as follows: The manual has the content of characteristics on main
parts, key components, function of parts, safety requirements and
instructions, battery instructions, point of attention, methods of coping
urgent, and maintenance. Symbols are used for reminding matters need to care
for, an understand of the manual fully is highly suggested. This manual is
written with current product information and product photo as the follow. It
is for the purpose easier understanding for users. The scooter is under
continuous im provement and innovation. We reserve the right improved products
without notification, any new improvement please feel free to contact with us
any time. We strongly believe that the scooter would bring you more convenient
and reach the goal of free life to you.
ANHUI JBH MEDICAL APPARATUS COMPANY LIMITED No. 116, Qicang Road, Mingguang,
Anhui, 239400, China
www.jbhmedical.com
Recommendation
Pay attention to “Warning” in the manual is to protect you from any injury.
Unable to follow “Notification” in this manual may result in damage the
scooter.
TABLE OF CONTENTS
Label of the Scooter …………………………………………………. 1 Symbols ……………………………………………………………………
2 Security Guidance………………………………………………………. 3-4 Major
parts………………………………………………………………… 5 Specification………………………………………………………………. 6
Specification Diagram…………………………………………………. 7 Contents in scooter
carton……………………………………………. 8 Main Operational Parts Function……………………………………. 9-11
The Folding and Unfolding……………………………………………. 12 Battery and
charging……………………………………………………. 13-14 Battery safety and life
guide………………………………………….. 15 Instruction of Operation……………………………………………….. 16
Trouble Shooting and Maintenance………………………………… 17-22 Guidelines and
manufacturer’s statement-Electromagnetic Emission.. …………………………………………………………………
23-24 Guidelines and manufacturer’s statement-Electromagnetic Immunity..
………………………………………………………………… 25-27 Warranty ………………………………………………………………….. 28
Warranty Statement……………………………………………………. 29
LABEL OF THE SCOOTER
Label of the scooter
Symbols on the label represent the meaning as below:
Manufacturer
Consult instructions for use
Date of manufacture
Batch number
Use until year &
IPX
month (Expiration date)
IP
CE mark
=Radio frequency fields beyond this point may exceed FCC general public
exposure limit
Attention, see instruction for use
Product fulfill WEEE directive Serial number
Type BF applied part
Water proof grade
UKCA mark
Medical device
1
SYMBOLS
Don’t use when packing damaged
Temperature limitation
Humidity limitation
Store in clean & dry place protected from rain, snow, ice, salt and water.
Danger of explosion Keep dry
Protect from heat and radioactive sources
Package Number
Equipotential
Foot Switch
Switch
CF application part
PCTB
Power
Disposal and recycling Only authorized recycling companies can recycle parts
of this mobility wheelchair
100~240VAC, 50~60 Hz
DC output +29.4V
2.0 A
Fuse Volume control Frequency 500VA
2
SECURITY GUIDANCE
Security Guidance
The user must perform all of the procedures in this manual.
This product is suitable for users with age between 18 to 75 years old. Do not
drive on public highway. No over cross any gap which is over 100 mm (3.94″) in
width. Never try to overpass obstacle which is over 40 mm (1.57″) in height.
Scooter is suitable for both outdoor and indoor use, hospital, senior center,
family or similar circumstances use only. The suitable environment of using
electric scooter: Temperature -10 j +50¥, Atmospheric Pressure 860 j 1060hPa,
Humidity 10% j 93%. Power Source Condition: Charging Voltage AC 220V 50Hz,
Battery Voltage DC 24V 6Ah, Power of Motor 180W environmental conditions that
might be harmful to the wheelchair (e.g. inclines greater than 9 degrees,
rain, snow, ice, etc.), such as temperature and humidity Operate scooter after
it is under unfolded condition and only allow one person on scooter all time.
Weight Limitations
The scooter is tested with simulation of human model at 120 kgs (265 lb) load
capacity. Your scooter is rated for a maximum weight capacity. Please refer to
the product specifications table for this limit. Keep in mind that the maximum
weight capacity includes the combined weight of the user and any accessories
mounted to the scooter. Stay within the specified weight capacity of your
scooter. Exceeding the weight capacity voids your warranty. We will not be
held responsible for injuries and/or property damage resulting from failure to
observe weight limitations.
Warning
Warning Warning
We are not responsible for any damage and inquiry cause due to over weight. Not to drive on dangerous slopes. Not to drive backwards when going up and down a hill. Max grad ability is uphill 8°.
8°
3
SECURITY GUIDANCE
Statement Indications for use: It is a motor driven, indoor and outdoor
transportation vehicle with the intended use to provide mobility to a disabled
or elderly person limited to a seated position.
The Scooter (Model FDB05A) has a base with a luminum a lloy frame, two front
wheels, two rear wheels, two anti-tip wheels, a seat, an adjustable steering
column, a tiller console, an electric motor, an electromagnetic brake, 2
rechargeable Lithium-Ion Batteries with an off-board charger. The movement of
the scooter is controlled by the rider who operates the throttle lever, speed
control dial and handle on the tiller console. The device is installed with an
electromagnetic brake that will engage automatically when the scooter is not
in use and the brake cannot be used manually. The Scooter only can be operated
on the flat road.
Please read the following statement
Please, read this manual carefully and understand everything clearly before
using the Electric wheelchair for the first time.
Please, do not use the scooter in any unclear cases, otherwise, the product
may be damaged or people may get hurt. If you have questions, please contact
us.
Please, pay attention to the warning and cautions in this manual. We are not
responsible for any injury and damage caused by wrong use of this product and
neglect of the warnings and cautions.
Instructions: WARNING Improper use will cause death or serious injury
NOTICE Improper use will cause damage of wheelchair
ADVISE Comply with the manual to keep wheelchair in good condition. WARNING DO
NOT make sharp turns at high speed or on inclines or reverse direc-
tion abruptly.
WARNING DO NOT utilize brake release / freewheeling option on any incline
without assistance to control motion.
WARNING To avoid danger of suffocation, keep all the plastic bag in the
package away from babies and children. Do not use the plastic bag in cribs,
beds, carriages or playpens. The plastic bag is not a toy.
4
MAJOR PARTS
21 1
20
19 18
17
16
2
22
15
3
14
23
4
5
6
13
7
8
9 10
11
12
Photo 1. Major parts name
1 Directional Control Lever 2 Steering Post 3 Tiller Angle Fixing Knob 4 Front Wheel Cover 5 Front wheel 6 Front Bumper 7 Middle Sliding Outter Frame 8 Middle Slinding Inner Frame
9 Transaxel 10 Rear Wheel Cover 11 Rear wheel 12 Batter Holder 13 Rear Bumper 14 Controller 15 Battery 16 Backrest
17 Side Seat Support Frame 18 Rear frame 19 Middle Sliding Frame Cover 20 Seat Cushion 21 Control Panel Cover 22 Fixing Knob 23 Slide
5
CONTENTS IN SCOOTER CARTON
Upon receipt of the scooter, please open carton packing and check if the
followings are included:
Scooter
Safety belt 1 PC
Four-hole wrench 1 PC
Hex Wrenches 2 PCS
User’s Manual FDB05A
Battery 1 PCS
Charger 1 PC
User’s Manual 1 PC
Photo 3. Scooter carton content
8
SPECIFICATION
Model Material Unfold Size (L W H) (mm/inch) Fold Size (L W H) (mm/inch) Loading Capacity Motor Battery Max Speed Driving Range Front Wheels Rear Wheels Climbing Slope Charging Time Seat Width Seat Depth Seat Height Turning Radius Drive Model Braking System Net Weight Without Battery Net Weight (Finished Product) Gross Weight
FDB05A Aluminium Alloy 940 × 470 × 920 mm (37″×18.5″×36.2″) 720 × 470 × 365 mm
(28.3″×18.5″×14.4″) 120 kgs (265 lb) 180W × 1pc brush motor 24V 10AH × 1pc
lithium battery 6 km/h (3.7mph) 20 kmc12.4 miles 160×50 mm (6.3″×2″) PU solid
wheels 190×54 mm (7.5″×2.1″) PU solid wheels
Max 8° 6~8 hours 326 mm (12.8″ 347 mm (13.7″ 550 mm (21.7″) 700 mm (27.6″)
Rear Drive Electromagnetic Brake 21 Kgs (46.3 lb) 23 Kgs (50.7 lb) 29 Kgs
(63.9 lb)
6
SPECIFICATION DIAGRAM
920 mm (36.2″)
347 mm (13.7″
160×50mm (6.3″×2″)
940 mm (37″)
190×54mm (7.5″×2.1″)
326 mm (12.8″)
550 mm (21.7″)
365 mm (14.4″)
720 mm (28.3″)
470 mm (18.5″)
Photo 2. Specification diagram
7
MAIN OPERATIONAL PARTS FUNCTION
Handle Bar Set
The handle bar set including Control Panel ,Key Switch, Speed Setting Knob and
Handle, Directional Control Lever. The major operational functions are set.
Photo 4. Handle bar set
Control Panel Photo 5. Control panel
Notice! Humidity of ambient environment significantly affect on the operational function main parts. Stay in low moisture surrounding before operating or during operating is strongly recommended.
Power Switch
a. Power is on after key switch turned clockwise, scooter is ready to go.
b. Power is off if key is turned anti-clockwise, scooter cannot be operated.
Turn the power off through key if driving is terminated.
Waring! Sudden immediately stop of scooter occurs when power is switched off
during operation through electromagnetic braking system control.
Photo 6. Power switch
Speed Controller Photo 7. Speed controller
The adjustment of driving speed through speed control knob by finger range
from 0 km/h to 6 km/h at your choice. Turn the knob to very left for speed
like turtle while turn very right rabbit like speed.
Warning! Always keep lower speed level during turning or backward for keeping
safe.
9
MAIN OPERATIONAL PARTS FUNCTION
Display Battery Power is shown on display while power is turned on.
Direction Control Lever
Photo 8. Dispay
Forward and backward control is under Control Lever.
Photo 9. Direction control lever
a. Gently hold handle with both hands.
b. Scooter go forward by pulling lever on the right with fingers.
c. Go backward by pulling lever on the left with fingers.
d. The Control Lever automatically to center position while released and brake
is on at the same moment.
Steering Post Tiller angle can be adjusted by rotating the knob under the
post.
Telescopic Handle Pull up plastic clipper for adjusting to length of handle,
push back the clipper at desired length.
Photo 10. Steering post
Photo 11. Telescopic handle
10
MAIN OPERATIONAL PARTS FUNCTION
Controller Located under rear cover which transfer the signal from control
panel to motor, brake and hub. Notice! Keep controller under low moisture
environment and make sure it is in dry condition before operation. Electric /
Manual Mode Switch Lever Hand Brake on and off can be done by switching the
lever for manual or electric control. Electric Control Mode Push down hand
brake lever for electric control mode. Manual Control Mode Pull up hand brake
lever for manual push mode.
Switch Lever
Photo 12. Electric and manual mode switching Lever
11
THE FOLDING AND UNFOLDING
1. Folding and unfolding of the scooter is only applied through manual
operation. 2. First lift up and rotate the nob in the middle of frame for
sliding in the frame to minimum
length through pushing the front post towards center with one hand, the other
hand pushing from back of scooter to center at the same time.
3. Unlock seat by pulling the lever under seat front till the locking lever
ends reaches the top of fixing holes on both side with a click sound, then
push seat down slowly till it attaches bottom frame.
4. Rotating the locking knob at bottom of steering post for tilting down the post to the top of seat and lock the knob again through rotating back.Scooter is fully folding to minimum size.
Photo 13. Manual fold 5. To unfold the scooter mainly operate the reverse steps of folding scooter manually.
Please make sure clear out any obstacle on scooter or
!
Caution under scooter for avoid getting caught during the pro-
cess of folding and unfolding.
12
BATTERY AND CHARGING
The scooter is designed for maintenance free with long usage of Lithium Ion Battery. It is suitable to be Charged with 24 V 10 Ah charger.
Fully charge the battery 5 hours is good for battery usage. At least charge once in every 3 month.
Charge battery to full level and take apart battery from scooter if not going to use your scooter for long period of time.
Steps of charging battery
Caution
Do not charge continuously over 5 hours.
1. Power off the scooter. Open the cover of charger cap, then insert the charger plug in charge port of scooter.
Photo 14. Close the ship stype switch or key switch
Photo 15. Charging port
Warning ! Make sure charger plug is fully plug in the charging port of scooter.
2. Connect the A/C power plug of charger to House power source. Check the light on charger, orange color light means charging is in progress while green light shows power if full.
3. Turn off power charger when battery is fully charged. Disconnect AC power source before disconnect the DC charging plug.
Warning ! Disconnect AC power source after fully charge of battery will keep the life of Lithium Ion Battery longer.
4. Charger red light is off while power source and power of charger is on. Please check if the power connection is set properly.
5. Full charge time is around 5 hours duration.
Charge battery directly
Caution
Keep charging time in 5 hours.
The battery can be charged directly with house power source, simple connect the Terminal of battery with power source, charging can be started.
1. Flip open the charger port protect on the front of battery.
2. Use the secondary charger pigtail to adapt the battery
charger to plug into the battery directly.
Photo 16. Charge battery directly
Caution
Immediately unplug charger from power source as soon as indicating light on charger turns green.
13
BATTERY AND CHARGING
Some knowledge on how charger charge battery Large input of current from
charge to battery at low voltage level, small current given
from charger when battery is close to full. Almost zero or little current
given to battery, continuously charging would not cause over charge, however,
it is suggested charge duration not over 5 hours. The battery will continuous
be charged under charger connected situation.
The indication of charger lights Two LED lights are on charger, red stands for
power connection, the other is charging
status indication which shows charging with orange color and turns green on
fully charged. Red light may continue after power source disconnection, there
maybe something wrong. Normally red light will be off in a few seconds if
disconnected to power source, it is normal for red light to snuff out while
battery voltage is up to level.
Other type of charger The charger is designed for battery of the scooter.
Strongly suggest do not use other
type of charger from original manufacturer.
Frequency of Charging The frequency of charging is based on the following
conditions A. All day long driving of scooter B. Occasional driving scooter
Safe and reliable battery charging A. Charge scooter after use if scooter is
for daily use, it would full battery for next day. Fully charge is 5 hours
depends on condition if battery is empty. B. Charge scooter once a week when
the use frequency is once in a week. Fully charge takes 5 hours. C. Keep
battery at full power.
How to reach maximum driving distance A. Make sure full charge before driving
B. Keep away from go up hills, macadam and soft terrain. C. Carry necessities,
reduce load of scooter. D. Drive smoothly without intermittent. Suitable
specification of battery Lithium Ion battery with specification listed.
Warning ! Do not take apart battery on your own. No need to add water for the
battery. Miss use of battery cause damage are excluded in warranty.
14
BATTERY SAFETY AND LIFE GUIDE
The reason of weak on new battery The scooter use deep-cycle battery under
special chemical technology that allow battery
quick to be charged with longer time use after full charge. Battery along with
scooter packing is charged full, however, the performance of initial power
will be reduced in the process of transportation, such as temperature
variation.
High temperature causes battery power loss while low temperature lead to
longer charging hours. It takes a few days for adapting to ambient environment
then turn to normal after transportation. It takes a few days tor returning to
stable performance after several charging and discharging cycles.
Steps of improving battery performance A. Always charge to full when battery
is new to ensure battery has 88% at least. B. Always charge battery to full
after use and keep on driving scooter is safe and familiar locations. Stay low
speed if you are first time user. C. Charge battery to full after second time
driving, it will increase the battery reach 90% capacity performance. D. After
4~5 times of driving with full charging, the performance of scooter will reach
100% level.
Ensure battery life Full charge of battery keep good performance and life
longer, while over charge and
seldom charge of battery damage.
Storage of scooter and Battery Long time for not using scooter, please
following the instruction for storage of scooter A. Charge full battery B.
Disconnect battery C. Keep scooter under dry and suitable temperature D. Avoid
dramatically temperature variation during storage Warning ! Keep in warm
condition a few days when battery get frozened
Long time storage of scooter is preferred lay a plate under foot rest panel
for supporting and it will avoid stain on tires after long time pressure to
the ground.
15
INSTRUCTION OF OPERATION
Before operating instruction A. Make sure battery is fully charged. B.
Familiar with the route condition including crowd, animal and potential
obstacles. C. Always keep away from uneven and sloppy terrain. D. Check if is
fully inserted and the brake lever switch is pushed. E. Steering with both
hands rest on handle bar. F. Sound the horn to check if it works.
Driving Upon driving the scooter, please follow the following steps: A. Unfold
scooter fully. B. Check if the seat at right position and adjust tiller to
comfortable position. C. Turn on power after making seat properly with hands
on handle bar. D. Gently push directional control lever with right thumb. E.
Brake release automatically and scooter move forward. Do not push control
lever to much in a sudden for the speed would be rapidly pick up. F. Turn
handle bar to left for turning left. G. Right turning of handle bar to make
right turn. H. Scooter move straight forward by keeping handle in center
position. I. Brake is automatically on when control level in center position
and once scooter stop going.
End of Driving A. Make sure scooter is fully stopped. B. Turn off Power with
Key or turn the rocker switch to “O” position. C. Carefully get off the
scooter. D. Fold scooter by manual.
16
TROUBLE SHOOTING AND MAINTENANCE
Photo 17. Top control panel and handle bar set
The controller contains programs for identifying problem points and
troubleshooting. When the diagnostics detects problems and errors. The LED
lights shine continuously in the form of a flash until the fault is
eliminated. Example: The number of flashes is “1-9” . Users can try to solve
the problem as follows.
If the problem persists, please contact us or our agent.
Number of flashes
Fault description
1
Low battery voltage or
battery connection problem
There is a problem with the
2
motor connection
Directional control
7
lever failure
Brake lever failure
9
Possible reason
Check the battery connection. If there is no problem with the connection, try
charging the battery.
Check all connections between the motor and the controller
Before turning on the power of the scooter, make sure the directional control
levers is in the parking position.
Check the connection between the brake lever and the motor to ensure that the
controller is securely connected.
17
TROUBLE SHOOTING AND MAINTENANCE
Insufficient capacity of battery or dropped on performance The decline issue
of battery capacity or performance mostly can be sorted out as follows: A.
Inspect whether key is fully inserted and at ON position. B. Make sure battery
is fully charged. C. Increase the charging cycle and time while battery
capacity is dropped. D. After going through above steps without any
improvement, a capacity test on battery is required.
Though the scooter is designed service free, the followings have to be checked
and maintained.
Connection of Battery A. Check if there is any corrosion and connection is
sound. B. Make sure battery is kept flat inside battery holder. C. Any damage
occurred of connections must be repaired or change new parts.
Plastic Cover Never apply oil or chemical substances for cleaning plastic
cover of scooter and wash
scooter with water avoid damaging electric components.
Bearing, Motor and Transmission A. These component were lubricated and sealed
during manufacturing process, not require for further lubrication after
purchasing. B. Always keep electric component in dry condition, especially
control panel, battery charger and all electric components. C. Dry any
components which get moist before driving the scooter.
18
TROUBLE SHOOTING AND MAINTENANCE
1. The battery of electric scooter is an extremely important part, the battery life determines the service life of the scooter. Try to keep the battery saturated after each use, to develop such a habit, it is recommended to conduct a deep discharge every month! If you don’t use an electric scooter for a long time, place it in a place to avoid bumps and pull out the battery to reduce discharge. It is also best not to overload in the process of use, which has direct harm to the battery, so it is not recommended to overload and avoid directly affecting the service life of the battery.
Photo 18. Conduct a deep discharge every month
2. After the electric scooter is used for a period of time, it is necessary to check the screw loosening of the electric scooter to ensure the connection and operation between the parts and components, and to avoid accidents.
Photo 19. Check the screw loosening
3. After being wet by Rain Water. Electric walking vehicle should be wiped with dry rag in time, especially the part containing electrical circuit, so that the electric walking vehicle can keep dry and clean.
Photo 20. Wiped with dry rag in time
Photo 21. Clean in time
4. If the electric scooter is on the beach, gravel or wet road, if there is sand, mud or gravel on the tire, it should be cleaned in time to prevent some parts from rusting or the tire running badly, which will affect the beauty and driving comfort and safety.
19
TROUBLE SHOOTING AND MAINTENANCE
5. Electric scooters should avoid scratching seat leather and PU handrails and plastic ornaments with sharp objects, thus affecting the beauty of the whole vehicle.
Photo 22. Avoid scratching seat leather and PU handrails and plastic ornaments
Photo 23. Avoid direct sunlight
6. Electric walking vehicle should be placed in a place where the sun can not shine, please avoid sunlight, otherwise it is not only harmful to the battery, but also has a direct impact on the service life of plastic parts and stickers of electric walking vehicles.
7. Electric scooters are relatively simple to operate, avoid driving by children or adults without experience in electric scooters. Drivers should avoid unnecessary large-scale body movements or sleep on electric scooters, which may lead to accidental danger. In order to avoid this situation, it is best to unplug the power switch key when not in use. It also avoids the risk of theft.
?
Photo 24. Avoid driving by children or adults without experience.
Mantainence tool Simple tool kit is accompanied with scooter in scooter packing, while dry soft fabric and so on are handy and easy to get in the market are not included. The period of maintence is vary depending on the real use frequency and situation, there is no specific rule.
20
TROUBLE SHOOTING AND MAINTENANCE
Maintenance Frenquecy:
1. Daily check
Turn off the controller, check the lever, make sure the lever is not bent and
broken, and be sure to retiun to it when you release it. Check the nibber base
of the lever for damage. Just check the base and do not repair it. If you have
any questions, please contact your dealer:
2. Weekly check
Disconnect the controller coimector and charger comiector fiom the batteiy
compaitment. check the connection and for corrosion. If necessary, please
contact tlie dealer:
Make sure that all parts of the controller are tightly connected to the
product, do not screw the screws too tiglitly:
Check the brakes. This inspection must be canied out on a level siuface and
there must be enough open space aroiuid.
Check the brakes: 1. Tum on the controller. After one second. check the
batteiy indicator to make sure
the batteiy is powered.
2. Slowly push the lever forwaid to guide you to hear the “beep” of the
brakes, and immediately release the lever. Ybu must hear the brake operation
sound after each lever is pushed for a few seconds:
3. Repeat the operation tluee times to push the controller to the rear, left
and riglit sides for inspection.
3. Monthly check
1. Check the anti-roll wheel for excessive wear and replace the wheel if
necessary.
2. Check the wear of the front wheels and drive wheels. If maintenance is
required. please contact your dealer.
3. Check the front fork for wear and looseness, which may indicate that
adjustment is needed or the bearing needs to be replaced. Please contact the
dealer for repair, or replacement.
4. Keep the product clean and do not leave debris, such as food, beverages,
residues, etc.
4. Storage
This product should be stored in a cool and dry environment. Do not store it
at the extreme temperature. If it cannot be stored under the above conditions,
it may cause rusting of the wheelchair, and damage to the electrical system.
Storage conditions: temperature: -40 ~ +65 degree CRelative humidity:
W80%Atmospheric pressure: 86kPa j 106kPa.
21
TROUBLE SHOOTING AND MAINTENANCE
If you discover a problem, require for parts supplyc Such as battery,
tire,charger and so on contact your authorized local Dealer or Distributor for
assistance, alternatively direct contact with manufacturer with the following
Contact Information.
www.jbhmedical.com
Hightly suggest that use oringinal parts from supplier to avoid any potential
issues or failure of function of scooter, please always consult with
authorized local Dealer or Distributor first.
22
GUIDELINES AND MANUFACTURER’S STATEMENT-ELECTROMAGNETIC EMISSION
Labeling explain for Electromagnetic compatibility
! Note !
FDB05A electric scooter meets the electromagnetic compatibility requirements
of IEC60601 standards.
The user shall install and use according to the EMC information provided in
the attached documents.
The portable and mobile RF communication equipment may affect the performance
of electric wheelchair and avoid strong electromagnetic interference when
using, such as close to mobile phones, microwave ovens, etc.
The guide and the manufacturer’s statement are detailed in the annex.
! Warning !
FDB05A electric scooter should not be used close to or stacked with other
equipment. If it must be used close to or stacked, it should be observed and
verified that it can operate normally under the configuration used.
In addition to the cables sold by FDB05A electric scooter manufacturers as
spare parts of internal components, the use of accessories and cables other
than those specified may result in increased emission or reduced immunity of
FDB05A electric scooter.
NO.
Project
Cablelengthcm Whether or not shielded Remark
1
POWER CORD
1.3
NO
/
2 CHARGER OUTPUT LINE
1.1
NO
/
23
GUIDELINES AND MANUFACTURER’S STATEMENT-ELECTROMAGNETIC EMISSION
Attachment
Guidelines and manufacturer’s statement-Electromagnetic Emission
FDB05A electric scooter is expected to be used in the electromagnetic environment specified below, and the buyer or user of the electric wheelchair vehicle shall ensure that it is used in this electromagnetic environment
Launch test
Compliance Electromagnetic environment-Guidelines
IEC60601 RFlaunch
FDB05A electric scooter only uses RF energy for
1
its internal functions. Therefore, its RF emission is
very low and may not cause any interference to
the nearby electronic equipment
IEC60601
B
RFlaunch
IEC60601
Harmonic emission
A
IEC60601
Voltage fluctuation/
FIT
flicker emission
FDB05A electric scooter is suitable for domestic use and all facilities directly connected to the public low-voltage power supply network for domestic use.
24
GUIDELINES AND MANUFACTURER’S STATEMENT-ELECTROMAGNETIC IMMUNITY
Guidelines and manufacturer’s statement-Electromagnetic Immunity
FDB05A electric scooter is expected to be used in the electromagnetic environment specified below, and the buyer or user of the electric wheelchair vehicle shall ensure that it is used in this electromagnetic environment.
Anti-interference IEC60601 Test Level measurement
Coincidence level
Electromagnetic environmentGuidelines
Electrostatic discharge
(ESD)
ISO7176
IEC60601
The floor should be ±6 kV Contact discharge ±6 kV Contact discharge wood, concrete or
±8 kV Air discharge
±8 kV Air discharge ceramic tile, and if the floor is covered
with synthetic mate-
rials, the relative
humidity should be
at least 30%.
Electrical fast transient burst
ISO7176
IEC60601
±1kV To the power cord
The power supply in the hospital or in ±1kV To the power cord the commercial environment should be of typical quality.
Surge ISO7176 IEC60601
±1 kV Differential-mode
voltage ±1 kV Common mode voltage
±1 kV Differential-mode voltage
The power supply in the hospital or in the commercial environment should be of typical quality.
Voltage sag, short int erruption and voltage variation on power in put line
ISO7176 IEC60601
0% UT, Last for 0.5
circuitscon sag
UT,100%
0% UT, Last for 0.5 cir- The power supply
c u i t sc o n U T, > 9 5 % in the hospital or in
sag
the commercial en-
vironment should
cu0itc%oUnTU,LTa,1st00fo%r
1 cirsag
0% UT, Last for 1 circuitcon UT,100%
be of typical quality. If the users of elec-
70 % UTLast for 25
circuitscon sag
UT,30%
o0sa%ngdUs cT,LoanstUfoT
r ,
5 1
sec00%
sag
tric wheelchair need
70 % UTLast for 25 circuitscon UT,30% sag
continuous operation during power interruption, uninterruptible power
0% UT, Last for 5 s u p p l y o r b a t t e r y
s e c o n d s c o n power supply is rec-
UT ,100% sag
ommended.
Power frequency magnetic field c50/60Hz
ISO7176
IEC60601
30 A/m
30 A/m 50/60 Hz
The power frequency magnetic field should have the horizontal characteristics of power frequency magnetic field in typical commercial or hospital environment.
Note: UT refers to the AC network voltage before the test voltage is applied
25
GUIDELINES AND MANUFACTURER’S STATEMENT-ELECTROMAGNETIC IMMUNITY
FDB05A electric scooter is expected to be used in the following specified electromagnetic environment, and the purchasers or users of NPL001aNPL002aNPL003 electric wheelchairs) shall ensure that it is used in this electromagnetic environment
Anti-interference IEC60601 Coincidence measurement Test Level level
Electromagnetic environment-Guidelines
RFconduction
ISO7176 IEC60601
3 Vrms
150 kHz to 80 MHz
3 Vrms
RF radiation (charger)
ISO7176 IEC60601
3 V/m
80 MHz to 1.0 GHz
3 V/m
RF radiation (wheelchair)
ISO7176 IEC60601
20 V/m
26 MHz to 2.5 GHz
20 V/m
Portable and mobile RF communication equipment shall not be used closer to any
part of the electric wheelchair, including cables, than the recommended
isolation distance. The distance shall be calculated by the formula
corresponding to the transmitter frequency.
Recommended isolation distance
d= 1.2 P
d= 1.2 P 80 MHz to 800 MHz d= 2.3 P 800 MHz to 1.0GHz
d= 0.2 P 26 MHz to 800 MHz
d= 0.4 P 800 MHz to 2.5 GHz
Where P is the maximum output rated power of the transmitter provided by the
transmitter manufacturer, in watts (W), and d is the recommended isolation
distance in meters (m).B
The field strength of the fixed RFtransmitter is determined by surveying the
electromagnetic field A. in each frequency range, B should be lower than the
coincidence level.
Interference may occur near equipment marked with the following symbols.
Note 1: At the frequency of 80MHz and 800MHz, the formula of higher frequency
band is adopted.
Note 2: These guidelines may not be suitable for all cases where
electromagnetic propagation is affected by absorption and reflection of
buildings, objects and human bodies.
26
GUIDELINES AND MANUFACTURER’S STATEMENT-ELECTROMAGNETIC IMMUNITY
a. If the fixed transmitting airport is strong, such as the base station of
wireless (cellular / cordless) telephone and ground mobile radio, amateur
radio, am (amplitude modulation) and FM (frequency modulation) radio broadcast
and television broadcast, and the field strength of the place where
NPL001aNPL002aNPL003 electric wheelchairs are located is higher than the RF
coincidence level of the above application, then the electric wheelchair
should be observed to verify It can operate normally. If abnormal performance
is observed, supplementary measures may be necessary, such as reorientation or
repositioning of the electric wheelchair.
b. The field strength should be less than 3 V / m in the whole frequency range
of 150 kHz to 80 MHz.
Recommended separation distance between portable and mobile RF communication
equipment and electric wheelchair.
FDB05A electric scooter is expected to be used in an electromagnetic environment where radiated RF disturbances are controlled. According to the maximum output power of communication equipment, the buyer or user of electric wheelchair can prevent electromagnetic interference by maintaining the minimum distance between portable and mobile RF communication equipment (transmitter) and electric wheelchair.
Rated maximum output power of transmitter/W
Isolation distance corresponding to different frequencies of transmitter/m
150 kHz
j 80 MHz
80MHz j 800 800 MHz j 1.0 26MHz j 800 800 MHz j
MHcChargerGHzcChargerMHz
2.5 GHz
cWheelchaircWheelchair
d= 1.2 P d= 1.2 P
d= 2.3 P
d= 0.2 P d= 0.4 P
0.01
0.12
0.12
0.23
0.02
0.04
0.1
0.38
0.38
0.73
0.06
0.13
1
1.2
1.2
2.3
10
3.8
3.8
7.3
0.2
0.4
0.63
1.26
100
12
12
23
2
4
For the rated maximum output power of the transmitter not listed in the above
table, the recommended isolation distance D, in meters (m), can be determined
by the formula in the corresponding transmitter frequency column, where P is
the maximum output rated power of the transmitter provided by the transmitter
manufacturer, in watt (W).
Note 1: At 80 MHz and 800 MHz frequencies, the formula for the higher
frequency range is used.
Note 2: These guidelines may not be suitable for all cases where
electromagnetic propagation is affected by absorption and reflection of
buildings, objects and human bodies.
27
WARRANTY
The purchaser of this product is entitled to a limited warranty as offered by
our company, and its affiliates on the following components and timeframes: ¸
Scooter frame: 3 years ¸ Motors: 1 year ¸ Controller and CPU system: 1 year ¸
Battery: 6 months ¸ Wear parts: 3 months
Includes tires, seat and back rest, armrests, and support straps. This
warranty is valid from the date of exfactory and valid for the replacement of
disfunctional parts only. Any parts under warranty will be replaced and
shipped to your door. Any service and labor fees, if applicable, to replace
parts under warranty must be paid by the user.
Due to its straigtforward design, most parts can be easily exchanged by the
end user without a professional service tech required. However, it is always
recommended you seek professional help for maintenance and service, to make
sure the work is down properly.
The warranty does not cover: 1. Products damaged by user negligence. 2.
products damaged accidentally. 3. Products damaged intentionally. 4. Products
that have been subjected to negligence. 5. Products that have been subjected
to abuse. 6. Products that have been improperly stored. 7. Products that have
been improperly handled. 8. Products that have been improperly operated. 9.
Products that have experienced general misuse. 10. Products that have been
modified in an unauthorized, unapproved way.
Warranty is non-transferable and only valid for the original wheelchair
purchaser.
The company reserves the right to make any change and improvement without
prior notice. It reserves and also the property of models and forbids their
reproduction, even partial.
28
WARRANTY STATEMENT
Warranty Registration Card
User Name Address Model
FDB05A
ID No. Phone No. Product No.
Purchasing Date
Manufacturer
Distributor Distributor
(Phone, Address)
(Month)
(Day)
(Year)
(Stamp or signature)
ANHUI JBH MEDICAL APPARATUS COMPANY LIMITED No. 116, Qicang Road, Mingguang,
Anhui, 239400, China
www.jbhmedical.com
29
ANHUI JBH MEDICAL APPARATUS COMPANY LIMITED No. 116, Qicang Road, Mingguang, Anhui, 239400, China
FDB05A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>