INSIGNIA NS-CH1IPC8 720p WiFi Camera User Guide

INSIGNIA NS-CH1IPC8 720p WiFi Camera

Product Information – Wi-Fi Camera NS-CH1IPC8

Package Contents

• Wi-Fi Camera NS-CH1IPC8

Features

• Wi-Fi connectivity for remote access
• Indoor camera with magnetic base
• Night vision with IR LED
• Microphone and speaker for two-way audio
• Micro SD slot for local storage (up to 64 GB)
• LED indicator for status notifications

System Requirements
Before using the product, ensure that you meet the following system requirements:

• A mobile device connected to a Wi-Fi network
• An available power outlet near the mounting location
• A Best Buy account for accessing the camera on multiple devices

Electrical Requirements
Make sure that the power cord can reach a power outlet from your chosen mounting location.

Product Usage Instructions

Mounting Your IP Camera
Using the magnetic base, you can place your indoor camera on a flat surface or mount it to the wall or ceiling. Follow the steps below:

Mounting on a Flat Surface

1. Place the magnetic mount on a flat surface.
2. Attach the camera to the magnetic base.

Mounting on the Ceiling

1. Remove the cover from the magnetic mount using a screwdriver.
2. Drill a hole in the ceiling at the desired mounting location.
3. Insert an anchor into the hole and secure the magnetic mount with a screw.
4. Push the cover back onto the magnetic base.
5. Attach the camera to the magnetic base.

Mounting on the Wall

1. Remove the wall plate from the back of the wall mount.
2. Mark and drill two holes in the wall at the desired mounting location.
3. Insert anchors into the holes and secure the wall plate with screws.
4. Align the camera with the tabs on the mount and twist to secure.
5. Slide the wall mount onto the wall plate.

Setting Up Your IP Camera

1. Connect your mobile device to a Wi-Fi network.
2. Type “connect.bestbuy.com/setup” in your device’s browser and follow the on-screen instructions to download the Insignia Connect App.
3. Plug your IP camera into a wall outlet using the included power cord and adapter.

Using Your IP Camera
The camera offers various functions and indicators for usage:

• Camera IR LED for night vision
• LED indicator for status notifications
• Microphone and speaker for two-way audio
• Magnetic base for easy placement
• Micro SD slot and reset hole located at the back of the camera

Inserting a Micro SD Card

1. Pull open the cover to the micro SD slot on the back of your IP camera.
2. Insert a micro SD card (up to 64 GB) into the slot until it clicks into place.

LED Indicator Status

Resetting to Factory Defaults

To reset your camera to factory defaults:

1. Pull open the cover to the reset hole on the back of your IP camera.
2. Push the reset tool or a paper clip into the reset hole and hold for a few seconds.

PACKAGE CONTENTS

• IP camera
• Magnetic base
• Wall mount
• Reset tool
• Power cord and AC adapter
• Screws with anchors (2 sets)
• Quick Setup Guide

FEATURES

• Live video viewing lets you check your home at any time
• Motion detection records when activity is sensed
• Motion alerts with video give you peace of mind
• 120-degree viewing angle captures all the action
• 2-way audio lets you listen in and speak to people or pets  at home
• Micro SD card backs up encrypted video in case of network outage
• For indoor use only

Before using your new product, please read these instructions to prevent any damage.

SYSTEM REQUIREMENTS

• Home Wi-Fi network

• Insignia Connect app (free download at connect.bestbuy.com/setup)
  The Insignia Connect app tracks status information for all of your Insignia smart home devices in one place. Signing into a Best Buy account is required for remote access and to keep your data secure. iOS 10.0 or later
  OR

• Android 6.0.1 (Marshmallow) or later

ELECTRICAL REQUIREMENTS

• Make sure that the power cord will be able to reach a power outlet from your mounting location.

MOUNTING TOOLS

Note : You don’t need any tools to mount to a flat surface. If mounting to your ceiling or wall, you’ll need a:

• Drill with 4.2 mm drill bit
• Flathead screwdriver
• Hammer (for anchors)
• Phillips screwdriver

SETTING UP YOUR IP CAMERA

1. Connect your mobile device to a Wi-Fi network.
2. Type connect.bestbuy.com/setup in the search bar of your device’s browser and follow the on-screen instructions to download the Insignia Connect App.
3. Plug your IP camera into a wall outlet using the included power cord and adapter.
4. Open the app and register or sign in with your existing Best Buy account info. Follow the on-screen instructions to complete setup.
   Note : If you plan to access your camera on multiple devices, you must sign into the same Best Buy account.

MOUNTING YOUR IP CAMERA

Using the magnetic base, you can place your indoor camera on a flat surface or mount it to the wall or ceiling. Before you mount, make sure that the power cord will be able to reach a power outlet.

Flat surface

1. Place the magnetic mount on a flat surface.
2. Attach the camera to the magnetic base.

Mount to ceiling

Note : Flip the video in your app settings so your video will be right- side up.

1. Insert a screwdriver into the slot by the cover, and pry the cover from the magnetic mount.
2. Drill a hole in the ceiling with a 4.2 mm drill bit where you want to mount your camera.
3. Insert an anchor into the hole, then secure the magnetic mount to the ceiling with a screw (included).
4. Push the cover back onto the magnetic base.
5. Attach the camera to the magnetic base.

Mount to wall

1. Remove the wall plate from the back of the wall mount.
2. Using the wall plate as a guide, mark and then drill two holes with a 4.2 mm drill bit where you want to mount your camera.
3. Insert the two anchors into the holes, then secure the wall plate to the wall with the two screws.
4. Align the bottom of the camera with the tabs on the  mount, and then twist the camera to secure.
5. mount, and then twist the camera to secure.

INSERTING A MICRO SD CARD

1. Pull open the cover to the micro SD slot on the back of your IP camera.
2. Insert a micro SD card (up to 64 GB) into the slot until it clicks into place.

USING YOUR IP CAMERA

LED status

RESETTING TO FACTORY DEFAULTS

Resetting to factory defaults disconnects your camera from your Insignia Connect app and resets Wi-Fi and system settings. Video stored on the cloud is not affected.

1. Pull open the cover to the reset hole on the back of your IP  camera.
2. Push the reset tool or a paper clip into the reset hole and hold for five seconds.

FIND YOUR USER GUIDE ONLINE
For more information about using your IP camera and its settings, check your online User Guide:

1. Go to www.insigniaproducts.com.
2.  Use the search bar to find NS-CH1IPC8.
3. Select Support & Downloads.
4. Next to User Guide, select the language you want.

SPECIFICATIONS

See your User Guide for a complete list of specifications.

TROUBLESHOOTING

See your User Guide for Troubleshooting information.

LEGAL NOTICES

FCC Statement
Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

• (1) this device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

Industry Canada Compliance IC Statement
This device complies with Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:

• (1) this device may not cause interference, and
• (2) this device must accept any interference, including interference that may cause undesired operation of the device

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada)
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China

References

• Best Buy Connect

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>