timberk T-WR10 Window Cleaning Robot Instruction Manual

: June 9, 2024
: TIMBERK

timberk T-WR10 Window Cleaning Robot

timberk T-WR10 Window Cleaning Robot

Thank you for purchasing our timberk window cleaning robot. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

PRECAUTIONS

Please read the manual carefully before use

Fasten the safety rope on robot and tie it to furniture before use to avoid fall off danger.
Please check whether the safety rope is damaged or loose before use.
Set warning sign under windows for people when cleaning windows without balcony.
The robot must be connected to the power cord for normal use.
Please use the robot when UPS battery is fully charged (green light on).
Please turn on the power before placing the robot to the window glass.
Make sure the robot is attached to the glass before letting go.
Please remove the robot before turning off the power.
Please make sure the clean ring installed securely to avoid air leakage before use.
Do not use the robot in rainy or wet weather.
Do not spray water directly on the robot.
Do not use for children.
This product is not a toy. Do not let children use and operate the robot. Be vigilant when using the robot. Keep children away from the underside of the robot work area.
Do not use on cracked glass. Do not use on reflective or coated glass because the cleaning wheel will scratch the glass surface.
Do not let hair, clothes, fingers and any part of the body close to the opening of the product or rotate parts.
Do not use near flammable liquids or gases.
Improper operation while ignoring these precautions can result in an injury to the user and others, as well as damage to their property.
Use exclusively for domestic purposes in accordance with this manual. The product is not intended for industrial/commercial use.
The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lacking life experience or knowledge, unless they are supervised or instructed in the use of the product by a person responsible for their safety.
Children must be supervised to make sure they do not play with the product.

POWER SAFETY INSTRUCTION

Use only the original power adapter included in the package. Use other power cords or adapters may cause failure or danger.
Appliances must only be powered by safety extra low voltage marked on the appliance.
Please use the suitable power outlet and do not place heavy objects on the power cord or adapter.
Please turn off the power and take off the power adapter when not in use.
DO NOT cover the power adapter and keep the normal heat dissipation of the power adapter.
DO NOT use the power adapter in humid environment. DO NOT touch the power adapter with wet hands or feet.
DO NOT use if power cord or adapter damaged.
A damaged power cord must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid any hazard.
Make sure that the power cord does not touch any sharp edges or hot surfaces.
Do not try to repair the product or replace any parts by yourself. Contact the nearest Service Center whenever you detect a defect.
DO NOT disassemble, short circuit or through the power adapter into fire. Discard any parts according to the local regulation.

WARNING INSTRUCTIONS

Please keep the user manual properly.
Be sure to observe the indicative warnings for the product.
DO NOT expose the robot to rain or wet places, keep the robot away from liquids.
DO NOT expose the robot to strong light and keep it away from the heat source.
Please keep the robot out of the reach of children.
Product operating temperature：0℃ – +40℃.
Please, tighten the safety rope before using the device.
Please, turn on the device before placing it on the window.
Please, turn off the power after removing the device from the window.
Do not use the device on uneven surfaces (stained glass, decorative tile, puzzle surface)
Do not use the device in rainy or high humidity weather
Do not use dirty water, detergent

WARNING!

The location and safety of the window cleaner robot shall be judged and indebted by the user.
Please read the manual carefully before use.
Please fasten safety rope on robot and tie it to indoor furniture before use.
Please remove the robot before turn off the power.
Do not use the device on uneven surfaces (stained glass, decorative tile, puzzle surface)
Do not use the device in rainy or high humidity weather
Children are prohibited from using this product.

DESIGNATION

This is a window glass cleaning robot. It has a vacuum motor to make the robot adsorb on the glass surface and walk freely on the vertical glass surface. There is an uninterruptible power supply system (UPS), which provides power in case of power failure and prevent falling.

The window cleaning robot has two clean wheels, which has the function of adsorption, walking and cleaning. The cleaning wheel can adsorb and walk on the vertical glass surface. The clean pad on the cleaning wheel can be easily removed, replaced, cleaned and reused. The clean pads are made from microfiber cloth, which has a very good cleaning effect.

The robot has artificial intelligence (AI), can plan the path and automatically detect the window frame. There are automatic cleaning mode and manual cleaning mode, so that users can control the robot freely.

PRODUCT FEATURE

Suitable for any kind of glass
AI Auto Clean
3 Auto Clean Mode
Auto stop when clean completed
Built-in Lithium Battery UPS Anti Fall
Auto Window Frame Detection
Microfiber Clean Pad
High Strength Safety Rope
Infrared Remote Control for Spot Clean

SPECIFICATIONS

Technical parameters

Technical parameters are shown in table 1

Table 1

Parameter	Unit	T-WR10
Power Adapter (Input)	–	AC 100-240 V ~ 50 Hz 2.0 А
Power Adapter (Output)	–	DC 24 V 3.75 А
Rated Power consumption	W	90
Battery UPS	mAh	600
Battery voltage	V	14.8
Battery operation time	min	about 20
Cleaning speed	min/m2	3
Cleaning modes	–	3
Min and Max work temperature	°C	0°C – +40°C
Adapter power cord	m	4 + 1.2
Safety rope length	m	4
Noise level	dB(А)	65
Suction power	Pa	2600
Max window dimensions	m	6*4
Min window dimensions	m	0.35*0.35
Net weight	kg	1.12
Gross weight	kg	2.1
Device dimensions	mm	106145292
Packing dimensions	mm	137230297

DESCRIPTION OF THE DEVICE

POWER ADAPTER

Power Adapter

BODY OF THE DEVICE

Body Of The Device

RC signal detector
Operation/failure/charging indicators
Sound signal speaker
Handle
Turning ON/OFF/STOP/PAUSE button
Power cord socket
Safety rope connection
Microfiber pads
Spray bottle

FUNCTION DESCRIPTION

Function Icon | LED Red: Robot is abnormal
LED Blue: Robot is normal
LED Green: Fully Charged
LED Orange: Charging
---|---
| ****

Power Button: ON/OFF/Start/Pause

| ****

Power Socket

| ****

Safety Rope Hole

DELIVERY SET

Window Cleaning Robot – 1 pc.
Remote Control – 1 pc.
AA battery – 2 pc.
Power Adapter – 1 pc.
DC power cord – 1 pc.
Clean Pad- 10 pc.
Clean Ring- 4 pc.
Safety Rope – 1 pc.
Water Bottle – 1 pc.
Instruction manual – 1 pc.
Warranty card – 1 pc.
Packaging – 1 pc.

BEGINNING

OPERATION GUIDE

Please make sure the robot is fully charged before use (LED green light on).When charging the built-in battery, please turn off the switch and connect the power adapter. When the orange light is on, it represents the charging mode, and when the green light is on, it represents that it is fully charged.
Please check that the safety rope and buckle are not damaged. Be sure to fasten the safety rope before use, and tie the safety rope to the fixtures in the house.
Before use, please ensure that the clean ring is fixed on the cleaning wheel to ensure good vacuum adsorption of the robot, and spray cleaning water according to the specifications.
When the window cleaning robot works, the power adapter must be connected before it can work normally.

OPERATION

HOW TO USE

Plugged in with power adapter, turn on the robot (LED blue) and ensure that the fan works, then attach the robot to the glass at about 10cm away from the frame (for robot self-inspection).
Make sure the robot is firmly attached on the glass, and ensure the safety rope and power cord are not affecting the clean path of the robot.
Press auto clean button on the remote control, the robot will move from bottom to top of the window, and then move in a zigzag shape, from left to right and from top to bottom to clean the window. After cleaning, the robot will return to the starting position at the bottom and make a “drip” sound.
If the robot stops at an inaccessible place accidently, please gently pull back the robot by safety rope.
To remove the robot, please hold the safety rope with one hand, remove the robot with another hand, then turn off the power.

Note:
The robot must be connected to the power adapter before it can work normally!

HOW TO CLEAN

STEP 1

If the glass is very dirty or dusty, please clean with dry pads (do not spray any water) for the first round, so to remove the dust on the glass.
If you spray water or detergent on the clean pads on the first clean round, the water or detergent will be mixed with sand and dust, which makes it into mud.

STEP 2

Install clean and dry clean pads on clean ring, and confirm that the clean ring is firmly installed on the clean wheel. Then spray a little water or detergent on the clean pads (2 to 3 spray). It must not be too much wet. The fully wet clean pads will affect the operation of the robot.
If there is sand or dust on the glass, you can spray water or detergent on this area, let the water or detergent soak the area, and wait for 2 to 3 minutes before cleaning.

STEP 3

Replace the clean and dry cloth spray the water or detergent at the edge of the clean pad to improve the vacuum suction of the robot, which improves the cleaning performance.

CAUTION!

Do not spray water into the robot, or put robot into the water.
Do not use the robot in rainy and wet weather.
Please use spray bottle with spray water or detergent when cleaning glass.
It is normal that the new clean pad will leave a few traces when used for the first time.
Clean and dry the dirty clean pad before using it. When spraying detergent, spray it on the clean pad or the glass directly.
If an unexpected power failure occurs during the operation of the robot, the built-in UPS battery will start automatically. The battery could support the robot vacuum for about 20 minutes. In case of accidental power failure of the robot, the robot will automatically stop and make a warning sound. At the same time, the red light continues to flash. Please remove the robot as soon as possible to prevent the robot from falling down when the power is exhausted.
If the robot stops outside the inaccessible range due to other conditions, please gently pull back the robot with safety rope. When pulling the safety rope, it should be close to the glass as far as possible to prevent the robot from falling.

REMOTE CONTROL

Remote Control

| Start Auto Clean| | Manual Clean To Upward
---|---|---|---
Function Button Icon | Stop| | Manual Clean To the Left
| Start or Pause| | Manual Clean To the Right
| Auto Clean Left to Right| | Manual Clean
To the downward
| Auto Clean To upward| |
| Auto Clean Right to Left| |

When the robot works inside or outside the window, the robot can be controlled by remote control.
Remote control operates on 2 AAA batteries (included in the set)

LED INDICATOR

DESCRIPTION	LED STATUS
1. Changing	Orange light on
2. Changing finished	Green light on
3. Power Failure	Red light flashes ，”drip, drip, drip ” warning sound
4. Vacuum pressure is low	Red light flashes once and “drip ” sound
5. Air leakage during operation	Red light flashes once and “drip” sound
6. Friction is too strong or too weak	Red light flashes once and “drip”

sound

Note : if LED flashes red and the robot continues to sound “drip, drip”, please check if power adapter is normal or power cord is loose.

INSTALL CLEAN PAD AND RING

Put the clean pad on the clean ring evenly.
Put the clean ring on the wheel. Ensure that all 6 clips on the clean ring are installed in place to avoid air leakage.

CARE AND CLEANING

CLEAN PAD MAINTENANCE

Washing temperature not higher than 40 ℃
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean

TROUBLESHOOTING

When the robot starts, it will run self-inspection first. If it cannot operate normally and the robot sends out an alarm sound, it indicates that the friction is too large or too small.
A: Please check the following problems：
（1）The clean pad is too dirty.
（2）Glass or glass stickers have high friction and are not suitable for use.
（3）When the glass surface is already very clean, the glass will be too slippery and the friction is too small.
（4）The ambient humidity is too low and the glass will be too slippery.

Q:When pressing the key to run automatic cleaning mode, the robot cannot detect the top of the window smoothly due to slipping.

A:(1)Please press the key Function Button Icon to pause the robot, then press the key or to run the automatic cleaning mode.
（2）If the water or detergent is sprayed too much, the clean pad is too wet or dirty, please replace the clean pad.

Q:The robot cannot finish cleaning the windows, or the window cleaning action is ended in advance

A :press the key or to redo the unfinished work

Q:The robot cannot climb up to the top of window.
A:(1）The friction is too small.
（2）The clean pad is wet.
（3）When the glass surface is already very clean, the glass will be too slippery.
（4）The ambient humidity is too low and the glass will be too slippery.
Q:The robot does not walk smoothly.
A:(1）Check if clean pads are dirty and change for clean ones.
（2）Check if any gaps on the glass.
（3）Check if any stickers on the glass surface.
（4）Check if the screw on the clean wheel is loose, then fasten it.
（5）Check if clean ring securely installed, then install.

Q: There are marks remain on the glass after cleaning.
A: Check if clean pads are dirty. Then change for clean pads and run clean routine again.
Q: The robot stops running due to power failure, make a warning sound, and the LED flashes red. How to deal with it?
A: (1）Gently pull the robot back with the safety rope. When pulling the safety rope, it should be close to the glass as far as possible to avoid falling.
（2）Press the power key to restart the robot.
（3）Check whether the plugs of the power supply are plugged in properly, whether there is poor contact or the power cord is disconnected.
Q: The robot stops when hitting unknown obstacles, LED flashes red but no alert
sound, how to deal with it?
A:(1)Remote control the robot to a safe position, or gently pull the robot back by
safety rope. When pulling the safety rope, it should be close to the glass to avoid
falling.
（2）Remove obstacles from window.
（3）Check if any reason for air leakage.
Q: When robot turned on, it does not operate and there is no warning sound?
A:

Item	LED Status	Description
1	Blue: flashes Orange: on Red light: off No warning sound	UPS battery is

too low, please charge the robot till led is green. If it still could not work
2| Blue: flashes Red: flashes No warning sound| Robot is abnormal. Please contact dealer

Q: The glass has scratches after cleaning.
A:（1）Please clean the glass with dry clean pads for the 1st round.
（2）For cleaning 2nd round, replace with new clean pads and keep it dry and clean. Spray a little water or detergent on the clean pads. It cannot be completely wet.
Q: The robot has cleaned all the windows, but it cannot stop automatically
A: Please press the key to manually stop.

BATTERY REMOVAL

The battery must be removed from the device before its utilization
Unplug the device before removing the battery.

UTILIZATION RULES]

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
For additional information about actual system of the garbage collection, address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

The symbol on the unit, packing materials and/or documentations means the battery used in this product not be toss in the garbage with ordinary household garbage.

After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device.
The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.
The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents.

www.timberk.ru

timberk Logo