Venom VS2886 Series X LED Console Stand User Guide

: June 9, 2024
: venom

Table of Contents

Care and Maintenance
Installation & Use
Care & Maintenance
PRODUCT OVERVIEW
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Venom VS2886 Series X LED Console Stand User Guide

IMPORTANT INFORMATION

Care and Maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to protect your warranty coverage:

Keep your device out of the reach of small children.
Keep the device dry. Precipitation, humidity and all types of liquid or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
Do not use or store the device in dusty, dirty areas, as moving parts and electronic components of your device can be damaged.
Do not use or store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics.
Do not use or store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
Do not short circuit the battery.
Do not drop, knock or shake the device. Rough handling can break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the device. All of the previous suggestions apply equally to your device, battery, charger or any enhancements.
The crossed out wheelie bin symbol on the product means that under the WEEE regulations, all consumer and household electrical and electronic products should not be mixed with general household waste as it may contain environmentally hazardous substances. For environmentally responsible recovery, recycling and treatment of the product, contact your local authority for details of your nearest designated collection point where it will be accepted free of charge.

Contents:
1 x LED console stand

Installation & Use

To turn on your LED console stand, place your Xbox Series X within the stand and plug the USB cable into the back of your console. To power ON/OFF, press the power button. The stand uses internal memory to recall the last selected setting.
To colour change, a short press is required for each of the 8 colour modes. The final press will enter colour changing cycle mode. To get a single pulse colour, simply hold down the button for 3 seconds on the desired colour when lit. To return to solid colour, simply press the button again.
Press to shift through the 6 brightness options.

Your LED console stand will automatically turn on/off with your console (allow a 2 minute shut down process for the LED console stand to power off completely). Unplugging the stand will automatically clear the colour settings and will revert back to the LED console stands original settings.

Care & Maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to protect your warranty coverage:

Keep your device out of the reach of small children.
Keep the device dry. Precipitation, humidity and all types of liquid or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
Do not use or store the device in dusty, dirty areas, as moving parts and electronic components of your device can be damaged.
Do not use or store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics.
Do not use or store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
Do not drop, knock or shake the device. Rough handling can break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the device.