Venom VS4928 LED Console Stand User Guide
- June 9, 2024
- venom
Table of Contents
Venom VS4928 LED Console Stand
IMPORTANT INFORMATION
Care and Maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you to protect your
warranty coverage:
- Keep your device out of the reach of small children.
- Keep the device dry. Precipitation, humidity and all types of liquid or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
- Do not use or store the device in dusty, dirty areas, as moving parts and electronic components of your device can be damaged.
- Do not use or store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics.
- Do not use or store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
- Do not short circuit the battery.
- Do not drop, knock or shake the device. Rough handling can break internal circuit boards and fine mechanics.
- Do not use harsh chemicals, cleaning solvents or strong detergents to clean the device. All of the previous suggestions apply equally to your device, battery, charger or any enhancements.
- The crossed out wheelie bin symbol on the product means that under the WEEE regulations, all consumer and household electrical and electronic products should not be mixed with general household waste as it may contain environmentally hazardous substances. For environmentally responsible recovery, recycling and treatment of the product, contact your local authority for details of your nearest designated collection point where it will be accepted free of charge.
Contents:
- 1 x LED console stand
Installation & Use
- To fit your Nintendo Switch Dock into the LED console stand simply place the dock into the stand and plug the USB cable into the back of the dock. To power ON/OFF, press the power button.
- To colour change, a short press is required for each of the 8 colour modes. The final press will enter colour changing cycle mode. To get a single pulse colour, simply hold down the button for 3 seconds on the desired colour when lit. To return to solid colour, simply press the button again.
- Press to shift through the 6 brightness options.
Care & Maintenance
Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to protect your warranty coverage:
- Keep your device out of the reach of small children.
- Keep the device dry. Precipitation, humidity and all types of liquid or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
- Do not use or store the device in dusty, dirty areas, as moving parts and electronic components of your device can be damaged.
- Do not use or store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics.
- Do not use or store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
- Do not drop, knock or shake the device. Rough handling can break internal circuit boards and fine mechanics.
- Do not use harsh chemicals, cleaning solvents or strong detergents to clean the device.
Helpline Information:
The helpline is a one-to-one live service.
Hours: 9.00am – 4.30pm Monday to Friday
Tel: +44 (0) 1763 284181
Email: customerservice@venomuk.com
Website: www.venomuk.com
To ensure that your call is handled quickly and efficiently please check that
you have the model number VS4928 and any other relevant information regarding
your product at the time of your call. Please retain these instructions for
future use.
Venom Ltd. Solution House, Sandon Road, Therfield, Hertfordshire SG8 9RE.
Venom is a trademark of Venom Ltd.