Venom Meta Quest 2 Power Bank User Manual

: June 16, 2024
: venom

Table of Contents

Venom Meta Quest 2 Power Bank User Manual
Care and Maintenance
Charging Station & Battery Packs
Installation & Use
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Venom Meta Quest 2 Power Bank User Manual

Helpline Information
The helpline is a one-to-one live service.
Hours: 9.00am – 4.30pm Monday to Friday
Tel: +44 (0) 1763 284181
Email: contact@venomuk.com
Website: www.venomuk.com

To ensure that your call is handled quickly and efficiently please check that you have the model number VS4203 and any other relevant information regarding your product at the time of your call. Please retain these instructions for future use.

Care and Maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to protect your warranty coverage:

Keep your device out of the reach of small children.
Keep the device dry. Precipitation, humidity and all types of liquid or moistur can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
Do not use or store the device in dusty, dirty areas, as moving parts and electronic components of your device can be damaged.
Do not use or store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics.
Do not use or store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
Do not short circuit the battery.
Do not drop, knock or shake the device. Rough handling can break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the device. All of the previous suggestions apply equally to your device, battery, charger or any enhancements.
The crossed out wheelie bin symbol on the product means that under the WEEE regulations, all consumer and household electrical and electronic products should not be mixed with general household waste as it may contain environmentally hazardous substances.
For environmentally responsible recovery, recycling and treatment of the product, contact your local authority for details of your nearest designated collection point where it will be accepted free of charge.

Charging Station & Battery Packs

For use with Meta Quest 2
Model number: VS4203,
User Guide

Contents

1 x Charging Station
2 x Rechargeable Battery Packs (1200mAh NimH)
1 x USB to USB Type C Charging Cable
2 x Battery Covers
1 x USB Type C Magnetic Charging Connector

The Rechargeable Battery Packs are fully compatible with the Official Standard Controllers for Meta Quest 2.

Installation & Use

Using the charging cable supplied, connect the charging station to a suitable USB power supply.
Insert the USB Type C Magnetic Charging Connector into the charging port on the side of your Meta Quest Headset.
Place your Meta Quest Headset, facing forward, into the Charging Station ensuring the magnetic charging connector on the right-hand side makes a connection with the magnetic connector on the headset.
Remove the battery pack cover on your Meta Quest controller along with any batteries.
Keep these safe with any other accessories for use in future. Carefully insert the Venom Rechargeable Battery Pack into the Meta Quest controllers.
Select the correct battery cover for your controller and carefully click into place.
Place the controllers into the charging docks.
When charging the LED light will glow red, once fully charged it will glow green. Each charging port has its own dedicated charging light to indicate when each device is charged.
Once fully charged you can remove your Meta Quest Headset and the controllers from the Charging Station.

The Battery percentage displayed on your Meta Quest Headset 2 or App may not show 100% once fully charged. However after reset or the controller timing out, the software, once reconnected will display the true percentage. This does not impact the performance or function of the rechargeable batteries or product.

Battery Information
Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime and increase the risk of overheating. Please dispose of batteries according to local regulations and recycle where possible. Do not dispose as household waste. When batteries have reached “end of life” these should be disposed of in a battery bucket, which can be found at local supermarkets and recycling centres.

Charge the battery pack fully before first use.
Only charge the battery pack whilst inserted into the Meta Quest 2 controller.
The device can charge 2 Meta Quest 2 controllers at the same time.

Product Video
Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to protect your warranty coverage:

Keep your device out of the reach of small children.
Keep the device dry. Rain, humidity and all types of liquid or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
Do not use or store the device in dusty, dirty areas as moving parts and electronic components of your device can be damaged.
Do not use or store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics.
Do not use or store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
Do not short circuit the battery.
Do not drop, knock or shake the Charging Station.
Do not touch the Charging Station or battery pack terminals.
Ensure the controller is fully seated into its dock to maintain a full and reliable electrical connection.
Regularly clean the dock of dust, dirt and debris with a clean dry cloth to ensure a secure electrical connection.
Do not short circuit any connectors or batteries.
Do not dismantle, modify or tamper with the product.
Do not dispose of the battery pack in fire or leave near a heat source such as a radiator – Always dispose of at local recycling facility, not in household refuse.
Never charge devices on bedding or insulating materials, or they may overheat.