CALCINI SweatPro 3 Earbud User Manual

CALCINI SweatPro 3 Earbud User Manual

PACKAGE CONTENTS

• 1 x Charging Case
• 1 x USB-C Cable
• 1 x User Manual • A pair of earbuds
• XS/S/M/L Eartips
• S/M/L Earwings

OVERVIEW

CHARGING

1. Charge earbuds
   
   Put earbuds back to Charging case

2. Case Charging
   
   Plug in the cable to the Charging case port

FIND YOUR FIT

Choose your comfortable size

Adjust to the right angle

Earbuds Pairing

Take out the earbuds, the blue light of the earbuds flashes slowly, then both earbuds paired.

After the first connected to the device, the earbuds will auto connect the last connection device.

Device Connecting

1. Turn on the Bluetooth on your device.
   

2. Select “Calcini sweatPro3” from the list of available devices.
   

After the first connection, your earbuds will automatically connect to the last connection device. (Mobile phone Bluetooth should be turned on first)

MUSIC

Double tap the left or right earbud.

Long press the left earbud for 2s

Long press the right earbud for 2s

CALLS

Answer calls/End calls /Reject calls

Answer calls/End calls
Double tap the left or right earbuds
Reject calls
long press the left or right earbuds

VOLUME

Triple tap the Learbud

Triple tap the R earbud

IPX8 Waterproof

The earbuds will NOT RECEIVE the Bluetooth signal in the following situation:

1. Diving with earbuds
2. Under the water

It doesn’t matter for use if the earbuds be dropped into water and you can take shower wearing earbuds.

signal reception show as following picture:

RESET THE EARBUDS

Please try to reset you earbuds in following situation.

1. You want to connect the earbud to a new device
2. Can not find what device your earbuds connected
3. Only one earbud wokring or only one earbuds connection

Reset operation

1. Take both earbuds out of the charging case

2. Press the touch button for 6s to power off until red flashing.
   

3. Hold the both earbuds touch button for 10 seconds, release button when both earbuds blink blue, then reset finished. You can search the bluetooth name again “SweatPro 3 “to reconnect after reset.

CONTROLS & LED INDICATORS

Earbuds

Charging Case

SPECIFICATIONS

Earbuds

Charging Case

Power On/Off

Power On| The charging compartment remains charged, flip the cover to remove the earbuds
---|---
Power Off| The charging compartment remains charged, and the earbuds are placed in the charging compartment

ATTENTION

1. Earbuds will power on after open charging case. It will power off after it be backed into the charging case and dose the lid.
2. After it connected device successfully first time, earbuds will power on and connect your device automatically after open the charging case next time you use.
3. Before to connect the new device, you should turn off the previous connected device’s Bluetooth or forget the pairing data.
4. When earbuds charging, please close the charging case lid.
5. Keep away from corrosive liquid and fire source.
6. The earbuds will power off when touch panel touch desktop or palm for 6s.
7. When the earbuds can’t be charged normally, please try to manually return the earbuds to the correct position in charging case.
8. Both earbuds must be reset at the same time, resetting only one earbuds will affect use normal!, need to reset both earbuds again. About to reset the earbuds, please refer to page 15.

FCC WARNING STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the  equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions.may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular in stallation.lf this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following.

MEASURES

• Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received,including interference that may cause undesired  operation.

The device has been evaluated to meet general RF exposure requirement.

CONTACT US

Active Warranty

Official Website: www.calcini.com
Support Service : support@calcini.com
B2B Distributor: distributors@calcini.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>