CALCINI SweatPro 3 True Wireless Earbuds User Manual

: June 6, 2024
: CALCINI

T rue Wireless Earbuds
SweatPro 3
User Manual

FIND YOUR FIT

Choose your comfortable size

PAIRING

Open the lip of the charging case first (Blue flash and enter the pairing mode)
Tum on the pairing function via BT on your device
From the list of available devices and select talking SweatPro 3″

Music

Calls

Long press left or right earbud for 4s can activate sin or another voice assistant
Double click left or right earbud can cancel call

Answer calls Click the left or right earbud Hang up or Reject Double click the left or right earbud

Game Mode

Triple-click left or right earbud (Double click again switch to music mode)

WaterProof (IPX13)

The earbuds will NOT RECEIVE the BT signal in the following situations:

Diving with earbuds
Earbuds are submerged in water while swimming (You can take shower with earbuds)

Reset the earbuds

You need reset your earbuds in the following case:

Bad signal, slow connection
Your earbuds are connected with another device

Starting with the earbuds

Take both earbuds out of the case
Touch and hold on the touch-control panels on both earbuds for 6s to power off until red flashing
Touch and hold on to the touch-control panels on both earbuds for 10s. ( Bule flashing indicate it is power on and red flashing 3 times indicate it to be reset successfully)
Put both earbuds into the charging case and close the lid
Open the lid again, and both earbuds will turn on then enter the pairing mode.(Please refer the page 3-5)

Package Contents

A Pairs of Earbuds with a charging case
USB-C Cable
S/M/L Ear Tips
S/M/L Ear Wings
User Manual
Thank Card

Product Diagram

Getting Started Charging

Fully charge the charging case before the first use. To charge, connect the charging case to a USB charger or charging port with the included USB-C cable.

Controls & LED Indicators Streaming Audio

Once paired, you can wirelessly stream audio on your device via earbuds. Music will automatically get paused when you receive an incoming phone call and will be resumed once the call ends

Play or pause music	Double click the left or right earbud
Skip to the previous track	Long press the left earbud for 2s
Skip to the next track	Long press the right earbud for 2s
Answer call	Click the left or right earbud
Hang up or Reject	Double click the left or right earbud
Cancel call	Double click left or right earbud
Volume +	Click the right earbud
Volume –	Click the left earbud
Game low latency	Triple-click left or right earbud
Switch to music mode	Double click left or right earbud

Earbuds

LED Status Indicator	Status
Blue flashing	Pairing
Red and blue flashing alternately	TWS pairing
Red flashing 3 times	Reset

Charging Case

LED Status Indicator	Status
Bule flashing 10S	Earbuds charging
Blue always flashing	Charging case charging
Blue turn off	Charging case fully charged

Specifications

Earbuds

Model	EA07
Technology	A2DP, AVRCP, HFP, HSP, AAC
Speaker Sensitivity	95d13±3dB@1KHz
Frequency Range	20Hz — 20KHz
Impedance	160
Charging Time	1.5H
Battery Life	>5H
Battery Type	Li-polymer (2 x 50mAh)
Operating Range	10m133ft
Weight	5g*2

Charging Case

Charging Input	5V
Charging Time	1.5H
Battery Type	Li-polymer 500mAh
Number of Earbuds Recharges	4 times
Weight	38g

Turn On/Off

Turn On| Open the lid of the charging case or touch and hold on the touch- control panels on one of the earbuds that you want to turn on for 6s
---|---
Turn Off| Return the earbuds to the charging case and close the lid or touch and hold on the touch-control pannels on one of the earbuds that you want to turn off for 6s

Pairing

Starting with the earbuds in the case:

Open the lid of the charging case, both earbuds will be turned on.
Take the earbuds out of the charging case and then enter pairing mode.
Tum on the pairing function via BT on the device you want to pair with the earbuds.
From the list of available devices and select “Calcini SweatPro 3”

Regular Use After Pairing

Once the earbuds are successfully paired with your device, they can be switched on and off as follows:

Open the lid of the charging case, then both earbuds will turn on and connect with each other automatically
To turn off, put the earbuds back in the charging case and close the lid. They will begin charging

Product Care & Use

Keep away from liquids and extreme heat
Don’t use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss

FCC Warning Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance with the instruction may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.lf this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following.

Measures:

-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.