dji OK200 Osmo Mobile SE Smartphone Stabilizer Instructions
- June 9, 2024
- DJi
Table of Contents
dji OK200 Osmo Mobile SE Smartphone Stabilizer
Safety at a Glance.
Please read this entire document and visit www.dji.com/osmo-mobile-
se to view the user manual, other
documents, and the tutorial videos with the most current instructions and
warnings. Failure to read and follow instructions and warnings may result in
personal injury, damage to your DJITM OSMOTM product, or other objects in the
vicinity. This document and all other collateral documents are subject to
change at the sole discretion of DJI OSMO.
By using this product, you hereby signify that you have read and agreed to
abide by the terms and conditions of this document. You agree that you are
solely responsible for your own conduct while using this product and for any
consequences thereof. This product is not intended for use by children without
direct adult supervision.
WARNING
- DO NOT allow the product to come into contact with any kind of liquid. DO NOT leave the product out in the rain or near a source of moisture. DO NOT drop the product into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion.
- Put out any product fire using water, sand, fire blanket, or a dry powder fire extinguisher.
- The product should be used in temperatures from 0º to 40º C (32° to 104° F). Use of the product in environments above 40º C (104° F) can lead to a fire or explosion. Use of the product below 0º C (32° F) can lead to permanent damage.
- Never disassemble or pierce the product in any way or the battery may leak, catch fire, or explode.
- DO NOT drop or strike the product. DO NOT place heavy objects on the product.
- DO NOT heat the product. DO NOT put the product in a microwave oven or in a pressurized container.
- DO NOT leave the product near heat sources such as a furnace or heater. DO NOT leave the product inside of a vehicle on hot days. The ideal storage temperature is 22º C to 28º C (72° to 82° F).
- DO NOT store the product fully discharged for an extended period. Otherwise, it will over discharge, which will lead to permanent damage.
CAUTION
- Intricate components inside Osmo Mobile SE may be damaged upon impact and cause the gimbal to be damaged.
- Make sure there is nothing obstructing the gimbal when Osmo Mobile SE is powered on.
- Osmo Mobile SE is not water resistant. DO NOT use any liquid cleansers. Only use a soft dry cloth to clean Osmo Mobile SE.
- Keep Osmo Mobile SE away from sand and dust to safeguard the sensors in the motors.
- Osmo Mobile SE consists of magnets. Keep it away from magcards, IC cards, pacemakers, hard disks, RAM chips, and other devices to avoid interference.
- Make sure to align the marks on Osmo Mobile SE and the Magnetic Phone Clamp when attaching. Otherwise, the phone may fall off. The Magnetic Phone Clamp attach to Osmo Mobile SE via magnets. DO NOT move it too fast or make any sudden movements.
- When the phone is attached to Osmo Mobile SE, the compass feature of the phone may experience interference. In such cases, calibrate the compass according to the prompts in the phone.
- If a mobile phone has near-field communication and wireless charging features, these features may be affected by the phone clamp when it is attached. These features will no longer be affected once the phone clamp is removed.
Specifications
- Name Osmo Mobile SE
- Model OK200
- Wireless Mode Bluetooth Low Energy 5.1
- Transmission Power (EIRP) ≤4 dBm
- Operating Frequency 2.4000-2.4835 GHz
- Operating Temperature 0° to 40° C
Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares
that this device (Osmo Mobile SE) is in compliance with the essential
requirements and other relevant provisions of Radio Equipment Regulations
2017.
A copy of the GB Declaration of Conformity is available online at www.dji.com
/euro-compliance
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to
recycle valuable raw materials and the treatment of toxic
substances.
www.dji.com/osmo-mobile-se/downloads