timberk T-HG2-Q11T Electric Fan Heater Instruction Manual

timberk T-HG2-Q11T Electric Fan Heater Instruction Manual

Dear customer!
We thank you for your wise choice and for a purchase of an electric fan heater. It will serve you for a long time

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT! Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

SAFEGUARDS

When using the device, a number of safety precautions must be observed. Improper operation by ignoring safety precautions can result in damage to the health of the user and other people, as well as damage to their property.

1. Read these instructions carefully before using the appliance to avoid damage during use.

2. Before starting up for the first time, check that the specifications on the product comply with the power supply specifications.

3. This appliance heats up to a very high temperature during operation. To avoid burns, do not touch the hot surfaces of the appliance with your hands and other parts of the body. To prevent property damage from overheating, fire, or explosion:

   • Place the device at least 1 m from furniture, curtains, pillows, bedding, paper, clothes, and other flammable objects and materials;
   • Do not dry clothes, towels, or any other materials with the heater;
   • Allow the appliance to cool down before moving it. To move the device, use the built-in handle.

4. Children must be supervised to prevent playing with the appliance.

5. If the device was at a temperature below 0ºC for some time, it must be kept at room temperature for at least 2 hours before turning it on.

6. Do not use the device outdoors or in high humidity areas.

7. The device is not intended for use by persons (including children) with educed physical, sensory or mental abilities or in the absence of their life experience or knowledge, unless they are supervised or instructed on the use of the device by the person responsible for their safety.

8. Do not attempt to repair the device or change its parts by yourself. To repair the product, contact an authorized service center.

9. Do not use accessories that are not supplied.

10. To prevent risk of electric shock:

    • Always disconnect the device from the power supply before assembling, disassembling and cleaning, or if you are not using it. There is little chance of electric shock from static voltage, even when the device is turned off.
    • Never use the device in a situation where it may come into contact with water;
    • Do not connect the appliance to the mains if its surface is wet;
    • If the power cord or plug is damaged, to avoid danger, it must be replaced by the manufacturer, authorized service center, or similar qualified personnel.
    • Do not plug or unplug the power cord from the outlet with wet hands.

11. Any electrical appliance should be monitored, especially if there are children nearby.

12. Disconnect the power cord from the outlet before performing cleaning of the device, including wet dust cleaning from its surface.

13. When disconnecting the appliance from the mains, do not pull on the power cord, grasp the plug. Do not twist and do not wind it on anything.

14. Store the device in a cool or warm place.

15. The plug should fit into a standard Euro outlet and plug into it without much effort. If it is impossible to insert euro plug into an outlet or it is hard to do so, flip the plug vertically 180 degrees and try again. If even after that you cannot easily insert the plug into the outlet, call an electrician to replace the outlet. Never use the appliance if the plug is not fully  insertedinto the outlet.

16. The use of extension cords is not recommended. If this is necessary, try to use the shortest extension cord possible, with a conductor cross-section of the extension cord not less than the cross-section of the core of the device cord.

17.  Do not use the device near explosive and flammable substances.

18.  ATTENTION! DO NOT COVER THE DEVICE while it is operating. Do not dry clothes or any other fabrics and materials on it. This can lead to overheating, failure, or significant damage to you and / or your property.
    ATTENTION! The manufacturer considers this type of breakdown as a non- warranty case.

19. Do not leave the appliance unattended for a long time.

20. Install the device only vertically on flat and dry surfaces.

21. Bad contact between the plug of the heater’s power cord and the electrical outlet can cause theplug to overheat.

22. The electrical cable of the device should not be crushed by furniture or be in places where it can be stepped on. Make sure that the power cord does not touch sharp edges or hot surfaces.

23. It is forbidden to operate the heater in rooms with a relative humidity of more than 93%, with explosive environment; high dust environment; chemically active environment that destroys metal and insulation.

24.  Do not use the device in rooms with high humidity, near bathtubs, showers, pools, ponds and in places where there is a possibility of falling into water or splashing water or water drops on the device.

25. Do not place the device on unstable surfaces. It is forbidden to install the device near or under the electric socket or under a conducted electric cable. This can lead to overheating of them, which will create an emergency situation.

26. When turning off the heater, you must first turn off the heating element, leaving the working fan on for at least 30-60 seconds, and only after that completely turn off the device and unplug the power cord.

27. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may result in fire, electric shock, or personal injury.

28. CAUTION! Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

29. Statement: heater is not located immediately below a socket-outlet

30. WARNING! Do not cover the device in order to avoid overheating.

31. Explanation of warning signs:

Caution! Hot surface

Attention! Do not cover

APPOINTMENT OF THE DEVICE

An electric fan heater is intended for heating and ventilating spaces of the room, for drying the air, walls and surfaces in the room.

Electric fan heaters are the best solution when carrying out construction work, for heating warehouses and hangars, workshops and services, and also for heating rooms and creating comfortable temperature during cold seasons.

The device is convenient to use and easy to install, economical to use due to minimal energy losses, increased heat dissipation and efficient distribution of air flow. Depending on the power, the device can be used in domestic, industrial, warehouse and service premises.

The main advantage of the electric fan heater is that it is able to create a directed large warm airflow, providing fast and efficient heating of large areas.

The electric fan heater has a sturdy external metal housing protected against corrosion. Air is heated in the inner casing, when passing through the heating elements, using a low-noise electric motor with a metal impeller, which takes air through the holes in the air intake grille and blows it through the holes in the air outlet. Additionally, the device is equipped with a temperature limiter, which turns off the heating elements in case of overheating. The device has a convenient handle for moving.

SPECIFICATIONS

Technical parameters
Technical parameters are indicated in table 1,2
Table 1 

Parameter| Unit| T-HG2- Q11T| T-HG3- Q11T| T-HG3-Q12T| T-HG5-Q12T
---|---|---|---|---|---
Rated power consumption| W| 2000| 3000| 3000| 5000
Rated power consumption (power modes)| W| 1000/2000| 1500/3000| 1000/2000/3000| 1500/3000/5000
Rated current| А| 8.7| 13| 13| 7.6
Power supply| V/Hz| 220-240~/50| 220-240~/50| 220-240~/50| 400 3~/50
Moisture protection class| –| IP24| IP24| IP24| IP24
Electrical protection class| –| Class I| Class I| Class I| Class I
Air consumption| m3/h| 360| 549| 600| 660
Increase in air temperatureat the air outlet| 0С| 98| 102| 102| 102
Heating area| m2| 20| 30| 30| 50
Noise level| dB(A)| 36| 36| 36| 41
Device dimensions| mm| 230195315| 265260400| 300250430| 300250430
Net weight| kg| 3.4| 4.7| 5.7| 6.2

Operating conditions
The electrical fan heater is designed for operation in areas with a mild and cold climate in rooms with a temperature from -20 °C to +40 °C and a relative humidity of up to 80% (at a temperature of +25 °C) in conditions that exclude the ingress of drops, splashes, and precipitation (climatic version of UHL 3.1 according to GOST15150-69).

DEVICE DESCRIPTION

T-HG2-Q11T, T-HG3-Q11T\

1. Handle for moving
2. Power mode knob
3. Thermostat knob
4. Heating element
5. Front protective grill
6. Body of the device

BT-HG3-Q12T, T-HG5-Q12T

1. Handle for moving
2. Body of the device
3. Power mode knob
4. Thermostat knob
5. Front protective grille

*The appearance of the device may differ from the images in the manual

DELIVERY SET

1. Electric fan heater – 1 pc.
2. Instruction manual – 1 pc.
3. Warranty card – 1 pc.
4. Packaging – 1 pc.

CONNECTION TO ELECTRIC MAINS

1. Before connecting the device to the mains, make sure that the parameters of the power supply at the connection point correspond to the parameters indicated on the rating label with the technical data of the device.
2. Before connecting the device, make sure it is properly grounded. Proper grounding is important to minimize electric shock and fire danger.

Models T-HG2-Q11T, T-HG3-Q11T, T-HG3-Q12T

1. The device is designed to be connected to an AC electrical mains with a single-phase voltage of 220- 240V~ (permissible voltage fluctuations from 198V~ to 242V~) and a ground loop.
2. To connect to the electrical mains, the device is equipped with a power cord with a plug.
3. To connect the device to the electrical mains, insert the plug of the power cord of the device into an outlet with a ground wire.

Model T-HG5-Q12T

1. The device is designed to be connected to an AC electrical mains with a three-phase voltage of 400 V 3~ (permissible voltage fluctuations from 380 V 3~ to 410 V 3~) and a ground loop.
2. To connect to the electrical network, the device is supplied with a three-wire power cord (please note that the power plug is not included in the delivery set).
3. To connect the device to the electrical network, connect the power cord to the fixed electrical network, and then turn on the power to the device. If the length of the power cord is not long enough, you can use a power outlet and plug (not included in the delivery set), designed for the power of the device, to connect to the electrical network. The scheme is presented in the section “Wiring diagram”.

ATTENTION!

1.  The electric wire supplied to the socket from the power board must have a core cross section of at least 2.5 mm2 (for copper wire).
2. A circuit breaker with a rated current of 25A must be installed in the power board to protect the electrical wiring from overloads.

OPERATION OF THE DEVICE

Control panel

*The appearance of the control panel may differ from the images in the manual

1. Operating mode selection knob Used to select the following operating modes: ventilation mode , low heating pow er , high heating power ****
2. Thermostat knob Used to set the room heating temperature

Operation of the fan heater Turning on
Make sure that the operating mode selection knob is set to position, then connect the device to the power source and set the operating mode selection knob to position, the electric motor of the device will turn on and the device will start operating in ventilation mode.

Heating power selection

Set the operating mode selection knob to position to select low heating power mode.

Set the operating mode selection knob to position to select high heating power mode.

Temperature setting
The room temperature can be set in the range from 0 to +40 °C.

In heating mode, turn the thermostat knob fully clockwise, if the room temperature is lower than the set temperature, the heating elements will turn on. When the room temperature reaches the desired level, turn the thermostat knob counterclockwise until the heating elements turn off.

Now the thermostat will maintain the set temperature automatically, by turning on and off the heating elements, the motor will work.

In an exceptionally cold weather, the appliance may not be able to fully heat the room. In this case, set the thermostat to a level slightly higher than desired.

Overheating protection

The heat gun is equipped with a device for switching off the heating elements and the device in case of overheating of the housing.

Overheating of the housing can occur from the following reasons:

• the entrance and exit safety grilles are covered with foreign objects or heavily soiled;
• the heat output of the device exceeds the heat loss of the room in which it operates;
• the electric motor is faulty.

ATTENTION!
Frequent triggering of the emergency shutdown device is not normal mode of operation of the device. In this case make sure that the device is really defective and contact an authorized service center.

Turning off

urn the thermostat knob fully counterclockwise and let the device run in ventilation mode for 3 minutes to cool the heating elements, then set the operating mode selection knob to position.

the position , the device must be connected to the mains. The device is equipped with an automatic temperature limiter for cooling the heating elements and. If the device is connected to the mains, this limiter will automatically cool the heating elements of the device to 30°С. After turn off the device, wait for about 15 minutes and disconnect the device from the mains.

ATTENTION!
In order to increase the life time of the device, it is recommended to follow the above mentioned instructions for turning off the device. Turning off the device without cooling the heating elements first can cause overheating and premature failure of the heating elements.

MAINTANANCE

The electric fan heater does not require any consumables for maintenance. In normal use, it does not require maintenance, but only dusting the fan grilles and monitoring performance. The serviceability of the device is determined by external inspection, then by turning on and checking the heating of the air flow.

When cleaning the device, do not use abrasive cleaners, as well as products containing alcohol and solvent.

This may damage the coating of the body or the body itself. Use a piece of cloth dampened with water. If the contamination is heavy, you can use a cloth soaked in soapy water. Before use, the device must be dry

WARNING:
Before cleaning the device, it must be turned off and disconnected from the power supply.

WIRING DIAGRAM

Models T-HG2-Q11T, T-HG3-Q11T, T-HG3-Q12T

Models T-HG5-Q12T

TROUBLESHOOTING

If it is impossible to fix these malfunctions with these methods, contact the authorized service center

whether the power supply is disconnected from the device and, if necessary, connect device to power supply
Defective operation mode switch| Contact an authorized servicecenter
Defective motor
Low heating temperature is set on thermostat| Set the temperature higher on thermostat by rotating the handleclockwise
Faulty contact connection in wiring scheme of electrical circuit| Contact an authorized service center or restore reliablecontact connection
| Temperature limiter parted electrical circuit and shut off the heating elements| Ensure that the air inlet or outlet grille is not blocked by foreign objects and wait for turning on of the temperature limiter, after the body ofthe device cools down
---|---|---
Malfunction in circuit breaker| Change the circuit breaker
Power cord is broken| Contact anauthorized service center to fix it
The room temperature is higher than the temperature set by thethermostat| Turn the thermostat handle clockwise until the heaters turn on
The device is connected to electric network, heating mode is set, the electric motor works, but there is no heating| Low heating temperature is set on thermostat| Set the temperature higher on thermostat by rotating the handleclockwise
Temperature limiter parted electrical circuit and shut off the heating elements| Ensure that the air inlet or outlet grille is not blocked by foreign objects and wait for turning on of the temperature limiter, after the body ofthe device cools down
Defective operation mode switch|

Contact an authorized service center

Defective thermostat
Defective heating element
The room temperature is higher than the temperature set by thethermostat| Turn the thermostat handle clockwise until the heaters turn on
Unnatural sound during operationof the fan, vibration| The fastening of the fan parts hasloosened| Fasten fan parts or contact anauthorized service center

UTILIZATION RULES

After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the  device, you can receive from a representative of the local authorities, after providing full information about the device. The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.

The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible  harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or  reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents

TRANSPORTATION AND STORAGE

1. During transportation, any possible impacts and movements of the package inside the vehicle should be excluded.
2. Transporting and storage should be provided in strict accordance to the manipulation marks.

We are exploring new technologies and we constantly improving the quality of our products. That’s why specifications, design and accessories are subject to change without any specific notice.

• This product must have storage in dry, well-ventilated space of warehouse at the temperature not lower than +5°C

References

• Timberk - Официальный сайт бренда бытовой техники

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>