timberk T-HGS01 Handle Garment Steamer Instruction Manual
- June 9, 2024
- TIMBERK
Table of Contents
timberk T-HGS01 Handle Garment Steamer
Dear customer!
We thank you for your wise choice and for a purchase of a steamer. It will
serve you for a long time.
IMPORTANT INFORMATION
Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt, and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which does not fundamentally affect its safety, performance, and functionality. There may be some misprints in text and digital notations in the present manual.
IMPORTANT!
Important safeguards and descriptions contained in this manual do not include
all possible situations that you may experience using the device. The
manufacturer is not responsible for damage of the appliance or its parts
during transportation, as a result of incorrect installation or voltage
fluctuations, as well as when any part of the appliance has been changed or
modified.
NOTE
There is a label on the device which has all the necessary technical data and
other useful information about the device. Use the appliance only for the
purpose specified in this manual.
SAFEGUARDS
- Please read the instruction manual before use and save it for future reference.
- Before first switching on check that the voltage indicated on the rating label corresponds to the mains voltage in your home.
- For home use only. Do not use it for industrial purposes. Use the steam iron only for its intended use.
- Do not use it outdoors or in a damp area.
- Never pull the cord while disconnecting from the power outlet; instead, grasp the plug only and pull to disconnect.
- Keep the cord away from sharp edges and hot surfaces.
- Always unplug the device from the power supply when filling it with water or emptying it and when not in use.
- To prevent the risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately, and check in a service center.
- Do not operate the steam iron with a damaged cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. To avoid risk of electric shock, do not disassemble the steam iron; take it to a service center for examination, repair or mechanical adjustment.
- The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
- Do not attempt to repair, adjust or replace any parts of the appliance. Check and repair the malfunctioning appliance in the nearest service center only.
- Children should be supervised to ensure that they do not play with the appliance.
- ATTENTION! Pour water into water tank only when the device is switched off from electric mains.
- ATTENTION! To avoid burns please always unplug the garment steamer before attaching or detaching the fabric brush and allow it to cool completely.
- ATTENTION! The garment steamer generates high temperatures of steam. Do not touch the steam head, make sure the steamer is facing away from you in an upright position.
- ATTENTION! When using the garment steamer, make sure the steamer head is facing away from you and in an upright position.
- ATTENTION! It is forbidden to turn on the device in the absence of water in the tank, this can lead to damage to the pump and failure of the device.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
- Do not use accessories other than those supplied.
APPOINTMENT OF THE DEVICE
The garment steamer is easy to use and is perfect for removing
wrinkles/creases from garments and curtains as well as refreshing furnishing
fabrics.
SPECIFICATIONS
Specifications of the device are shown in Table 1.
| Parameter | Units | Technical parameters |
|---|---|---|
| Rated power consumption | W | 1600 |
| Power supply | V/Hz | 220-240~/50 |
| Steam rate | g/min | 30 |
| Cord length | m | 1.8 |
| Water tank | ml | 320 |
| Net weight | kg | 1 |
| Device dimensions | mm | 262x114x155 |
| --- | --- | --- |
DEVICE DESCRIPTION
- Holes for steam outlet
- Control button
- Display
- Handle
- Twisting protection
- Removable water tank
- Brush
- Measuring cup
- Steam button
- AUTO-OFF Indicator
- High-intensity steam indicator
- Low-intensity steam indicator
- Heating indicator
The appearance of the device may differ from the images in the manual
DELIVERY SET
- Steamer – 1 pc.
- Cup – 1 pc.
- Brush – 1 pc.
- Nozzle for delicate fabrics – 1 pc.
- Instruction manual – 1 pc.
- Warranty card – 1 pc.
- Packing – 1 pc.
PREPARATIONS
- Pull out the water tank
- Open the water inlet cover and fill the tap water in the water tank until it reaches the maximum level.
- Put back the water tank.
ATTENTION!
Pour water into the water tank only when the device is switched off from the
electric mains.
- Hold the appliance with your hand positioned safely at the neck of the garment steamer in an upright position, and use your other hand to attach the fabric brush onto the steam head. the fabric brush can be attached either way and will lock into position with an audible ”click”.
ATTENTION!
In order to steam delicate fabric, please use the nozzle for delicate fabrics.
ATTENTION!
To avoid scalding please always unplug the garment steamer before attaching or
detaching the fabric brush and allow it to cool completely.
- Connect the device to the mains.
- Press the control button.
- The appliance will heat. During heating, the indicator will flash on the display, as soon as they stop flashing, you can start streaming.
- The steamer has two steam modes. Select the desired mode depending on the degree of bruising or the type of fabric.
- To set the desired steam mode, press the control button the necessary number of times: 1 time – light steam ; 2 times – powerful steam . The indicator of the desired mode will flash
STEAMING
-
It can be used on most fabrics according to the fabric label.
-
The garment steamer can be easily used when the fabric is hanging. Put the garments onto the hanger, slightly stretch the fabric and check that there is nothing under the fabric which can be damaged by the steam
NOTE: we recommend you do not steam over metal accessories. -
To supply steam, press and hold the steam button to stop steaming, and release the button.
-
Keep a distance of at least 5 cm between the steam head and the garment and move your arm up and down motion. You will feel vibrations and hear a subtle humming sound while steaming; this is normal.
WARNING:
- the garment steamer generates high temperatures of steam. Do not touch the steam head, make sure the steamer is facing away from you in an upright position.
- when using the garment steamer, make sure the steamer head is facing away from you and in an upright position
- When the user stops using the product for 20 minutes, the internal control circuit of the appliance will cut off the power supply and automatically power off, the auto-shut-off
light will flash slowly , and the appliance will stop heating to prevent accidents and save electricity. Repress the control button to start use the appliance again.
AFTER EACH USE
- Switch off the appliance by pressing the power button.
- Disconnect the power cord from the power outlet.
- Disconnect the water tank and pour the water into the sink.
- Always empty the water tank after each use.
CARE AND STORAGE
- Always unplug the appliance before cleaning.
- Let the appliance cool down completely.
- Remove the fabric brush from its steam head
- Clean surfaces with a damp cloth.
- Do not use harsh or abrasive cleaning agents or solvents.
- Do not put the garment steamer in water or any other liquid.
- Do not locate the appliance near a heat source or direct sunlight.
- Always ensure the steam outlet hole is clean and free from scaling and not blocked.
SCALE REMOVING
- To prevent scale appear on the inner surfaces of the unit, please use only distilled water.
- If using tap water scale appears on the main parts of the garment steamer and it is recommended to clean it off once a month.
- Prepare a solution of 50% vinegar and 50% water.
- Pour the solution into the water tank.
- Use the device running idle, without steaming garments. If needed, running idle once again.
- Rinse the water tank with flowing water. Pour water inside the water tank and use the device running cycle.
UTILIZATION RULES
The symbol on the unit, packing materials, and/or documentation means used electrical and electronic units should not be tossed in the garbage with ordinary household garbage. These units should be passed to a special receiving point.
For additional information about the actual system of garbage collection addresses the local authority.
Valid utilization will help to save valuable resources and avoid negative work on public health and the environment which happens with incorrect using garbage. After the lifetime of the device expires, it should be recycled in compliance with the laws, rules, and methods in the region of recycling. Detailed information about the recycling of the device, can receive from a representative of the local authorities, after providing full information about the device.
The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. The warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.
The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and/or third parties, as well as in situations caused by natural and/or anthropogenic accidents.