Neomounts FPMA-W100 Monitor Mount Instructions Manual
- June 9, 2024
- Neomounts
Table of Contents
Neomounts FPMA-W100 Monitor Mount
SPECIFICATIONS
GENERAL
- Min. screen size 10 inch
- Max. screen size 30 inch
- Min. weight 0 kg (per screen)
- Max. weight 10 kg (per screen)
- Screen 1
- VESA pattern
- 100×100 mm
- 75×75 mm
- VESA minimum 75×75 mm
- VESA maximum 100×100 mm
- Distance to wall 11 cm
FUNCTIONALITY
- Type Full motion
- Tilt
- Rotate
- Swive
- Tilt (degrees) 180°
- Swivel (degrees) 180°
- Rotate (degrees) 270°
- Adjustment type None
INFORMATION
- Color: Silver
- Warranty: 5 year
- EAN code: 8717371444389
Please note: The inch sizes stated are just an indication, combined with the weight and VESA sizes. The maximum weight and VESA size are absolute restrictions for the products and should not be exceeded.
Description
Neomounts by Newstar TV/Monitor Wall Mount (swivel or tilt) for 10″-30″ Screen – Black
The Neomounts by Newstar wall mount, model FPMA-W100 is a swivel and rotatable wall mount for flat screens up to 30″. This mount is a great choice when you want the ultimate viewing flexibility with your flat screen. Effortlessly pull the display out from the wall, position it in almost any direction, turn it around corners, and then smoothly return it to the wall when finished. Neomounts by Newstars’ rotate (270°) and swivel (180°)technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The depth of this mount is 11 centimeters. Cable management conceals and routes cables from mount to flat screen.
Hide your cables to keep the living room, bedroom, or home cinema installation nice and tidy. Neomounts by Newstar FPMA-W100 has one pivot point and is suitable for screens up to 30″ (76 cm). The weight capacity of this product is 10 kg for each screen. The wall mount is suitable for screens that meet VESA hole patterns 75×75 and 100x100mm. Different hole patterns can be covered using Neomounts by Newstar VESA adapter plates. Create a clean design ambiance for your flat screen TV in the living room, bedroom, or home cinema. This wall mount includes black and white covers to change the mount to the color you like. All installation material is included with the product.
Overview
FPMA-W100 NEOMOUNTS BY NEWSTAR TV WALL MOUNT
Features
- Suitable for screens ranging in size from 10 to 27 inches, and weighing no more than 12 kilograms (verify VESA compatibility).
- In increments of one (1) cm up to fifteen centimeters, the height can be changed.
- There is compatibility with all VESA sizes between 75x75mm and 100x100mm
- Further explanation about VESA in the product description.
Five Year Warranty
Newstar can provide mounts of the highest quality thanks to its more than 20 years of experience. You receive what you paid for.
Note: Please take note that products with electrical plugs are produced with US consumers in mind. This gadget may require an adapter or converter to be used while you are traveling because outlets and voltage vary from one nation to the next. Please check compatibility prior to purchasing.
User Support
- Address: Newstar Computer Products Europa B.V. I Wateringweg 62 I 2031 EJ Haarlem I The Netherlands I
- Contact no. +3 1(0)23-5478888
- Support: info@neomounts.com
- Email: www.neomounts.com
Chamber of Commerce 37076185 ( VAT NL805154383B0 1 I BIC RABONL2U I IBAN NL51RABO0375403299)
FAQ’s
What use does a monitor mount serve?****
An item of special equipment called a monitor stand is made to make using a computer more comfortable for your eyes and body. You have the choice to set it to your chosen eye-to-monitor distance because it is designed so that your monitor may either focus on it or rest on top of it.
What is necessary for monitor mounting?****
The mounting kit should include every piece of hardware, parts, and accessories required to install a clamp mount. Only a Phillips head screwdriver is required. The bottom of the mounting arm is where the bracket is attached. Make sure that every screw is correctly positioned and completely tightened.
Is the desk harmed by the monitor mount?****
Make sure the monitor is evenly distributed while attaching it. Similarly, if the desk isn’t sturdy enough, you face the risk of getting hurt. The majority of business-grade office furniture’s 24-mm thick desktops will function adequately. Commercial desktops with a thickness of 12 mm are typically accepted as well, but only for single mounting.
How should I pick the best monitor mount?****
Simply look at the back to see if your computer monitor conforms to VESA requirements. You should see the typical four-hole screw pattern at the back of your display if it complies. Larger monitors will have 200 x 100 mm screw holes, whereas the most typical screw hole design is either 75 x 75 mm or 100 x 100 mm.
Where should the monitor mount go?****
The monitor height should be adjusted such that the top of the screen is at, or just below, eye level. When seeing the center of the screen, your eyes should be somewhat downward. Place the monitor so that it is at least 20 inches (51 cm) from your eyes, or at arm’s length.
Are mounts supported by all monitors?****
Yes, you can put the majority of monitors on a monitor arm. On the back of the monitor, there are conventional VESA hole patterns of 75 x 75 mm or 100 x 100 mm for attaching to a monitor arm.
Are screws included with monitor mounts?****
The screws are missing from the monitor, however, any mounting bracket that accommodates 100mm VESA mounting points ought to include them. if you don’t have any screws on hand.
Is monitor wall mounting preferably?****
Not only is using a monitor mount effective, but it also frees up a tonne of room. Setting up the monitor on the wall will allow you to save a lot of space if you have a laptop table.
Is a monitor mount necessary?****
If you want an ergonomic computer setup, the majority of people advise purchasing a monitor arm.
Do monitor mounts merit the cost?****
A high-quality monitor arm is a tool for improved office ergonomics, according to the main insight.
What monitor size mounts best?****
Dimensions of VESA-compliant holds that are most frequently used are 75 x 75 mm and 100 x 100 mm (monitors weighing less than 30 lbs.).
Are monitor mounts of the same size?****
The VESA standard is one that is used to attach flat screens, LCD displays, monitors, and televisions on TV or monitor stands. Depending on the size and weight of the screen, at least four threads or holes are necessary. You can mount your TV to a wall, table, or ceiling monitor thanks to the VESA standard.
What does the common monitor mount go by?****
The Flat Display Mounting Interface (FDMI) set of standards was created by the Video Electronics Standards Association for mounting flat panel monitors, televisions, and other displays to stands or wall mounts. The VESA Mounting Interface Standard (MIS) or simply VESA mount are other names for it.
How many displays I can accommodate?****
This will be largely determined by your graphics hardware. With desktop computers, this frequently implies that two different screens can be plugged into the computer’s back. Most graphics cards can accommodate two monitors. In laptops, in addition to the internal display, the card can power one external monitor.
What distance from the monitor is ideal?****
Typically, the ideal viewing distance is between 20 and 40 inches (50 and 100 cm) from the eye to the front surface of the computer screen.
Download this PDF Link:Neomounts FPMA-W100 Monitor Mount Instructions Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>