SIIG H.265 IPTV Encoder with Loopout User Manual

SIIG H.265 IPTV Encoder with Loopout User Manual

Features

• Output supports RTSP / HLS / RTMP (5) / RTP / UDP
• Support a variety of video decoding: H.265 main stream, H.264 basic, mainstream and advanced quality, MJPEG/JPEG basic quality
• Audio coding format supports AAC, AAC +, AAC ++
• Maximum support 2 channel video stream decoding support 1 channel only audio stream decoding
• Support HDCP1 .4
• HDMI IN resolution supports the maximum 1080P@60Hz 4:4:4 8 bit with one loop out
• Support CBRNBR two coding modes, maximum code rate up to 40Mbps (Main code stream is 40M, Sub-code stream is 8M)
• Support analog audio extraction and embedded

Package Contents

• IP1V Encoder
• Power adapter DC 12V/1 A
• Mounting kits
• Phoenix plugs for RS232 cable termination
• User Manual

Layout

1. 3.5mm Audio Embedded port
2. 3.5mm Audio Extraction port
3. HDMI Input Indicator
4. HDMI Input: connect to video source
5. HDMI Output Indicator
6. HDMI Output: connect to display
7. Reset BUTTON: (Long press 3s to reset default)
8. RJ-45: Connect to the Ethernet
9. RS232 port: for RS-232 signal pass-through
10. POWER JACK: DC 12V/1A

Device Setting Description

1. Device default IP
   192.168.1.168

2. Browser login password
   default user name & password: admin/admin

3. Main stream

1. Channel address can support RTSP / HLS / RTMP (5) /UDP/ RTP protocol
2. The maximum support 1920*1080@60fps resolution decoding. Main stream default auto decoding
3. Bit rate (kbps) maximum support 2-40960, FPS maximum support 1-90, key frame interval maximum support 1-300, bit rate statistical interval (seconds)1-60, bitstream control: support CBR and VBR
4. Enable RTSP by default
   ※ No need to restart the device after successful setting
   ※ If all four frames are decoded at the same time, the source supports only 1080P encoded frame rate/key frame interval 25FPS video stream
   ※ HLS format video streams only support H.264 decoding
   ※ RTMP needs to set the video encoding to H.264,and YouTube needs to set the audio format to AAC

4. Sub stream

• 1. The sub stream setting is the same as the main stream
• 2. The maximum bit rate of sub stream (KBPS) is 2-8192, and the maximum FPS is 1-30
• 3. After setting the sub stream, you can choose to set the Stream level, including baseline Pro file, Main Profile and High Profile
  5. Video setting

1. Video input setting included: Rotation, Mirroring, Flipping, etc.
2. Rotation include 90°, 180°, 270°
3. Video source signal clipping can be used to clip images within the resolution range. Note that it will not take effect until it is started, and it is disabled by default;

Note: The parameters for starting point-cut and cutting width in the upper left corner cannot exceed 1920. The parameters for starting point-cut and Height in the upper left corner cannot exceed 1080, and parameters can only be set to an even number.

6. Audio setting

Audio input
Audio input is using for HDMI audio input and Analog audio embedded settings, When the HDMI audio input and Analog audio input enabled at the same time, then the stream, such as the RTSP audio will be played HDMI audio and the analog audio embedded simultaneously, Volume range O – 256;
※ Audio input is available for all streams
Audio Coding
Audio support AAC/AAC + +/AC3/MP2/MP3, sampling rate 44.1 /48khz, bit rate: 128 default Support Enable RTSP Audio stream transfer or modify audio stream transfer address
※ Support to set sampling rate when HDMI audio input is enabled
Audio Output
Audio output support to set HDMI loop audio output and analog audio output

7. OSD Setting

Support setting 4 OSDs, supporting setting Format text, date, style, font size, color, etc. After setting, can be viewed in the main code
stream and sub-code stream Note: Make sure the Foreground Alpha more than “1” when doing the OSD Setting. Setting the Foreground Alpha to “O” will make it impossible to see the font.

8. Serial port setting description
RS232 Pass through support Encoder to Computer; Or Encoder to Encoder

Encoder to Computer:

1. Using USB to RS232 cable access to the serial port of the Encoder
2. Open the serial port tool, connect to the correct port.
3. Enter the Encoder web page to set the port number, the web page can set the source port number and IP information; Target port number, target IP.
4. Checking the IP address of the computer, need to use a Network tool to type computer side information and device side information according to the following figure, and select the corresponding baud rate to perform RS232 Pass through between the computer and Encoder.

Encoder to Encode:
Distinguishing between source and target information, type in correct Source IP, Port to the Source Encoder. Type in correct Target IP and Port to the target Encoder

Application

Audio Format Supported

• Input: LPCM2.0 Sample rate 44.1 KHz and 48KHz
• Audio Encode: MCLC, MC+, MC++
• Audio bit rate:
  MCLC: 48-320
  MC+:32-128
  MC++: 16-64

Input Supported Resolution List

Dear Valued Customer
WE REALLY
APPRECIATE
YOUR PURCHASE
-thank you-

Support
For more info or tech support http://www.siig.com/support

Sep, 2021 Copyright© 2021 by SIIG, Inc. All rights reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>