PAX E770 Integrate Smart Terminal Instruction Manual
- June 9, 2024
- Pax
Table of Contents
E770 Integrate Smart Terminal
Instruction Manual
PAX
TECHNOLOGY LIMITED
E770 Integrate Smart Terminal
Note: Product images shown may be different than actual product received
Contents Checklist
Please check the components after unpacking. If any are missing, please contact the dealer.
| Part | Qty |
|---|---|
| E770 | 1 |
| AC Power Adapter | 1 |
| AC Power Cable | 1 |
| SIM card ejector | 1 |
Product Description
Terminal Ports
The following ports are accessible on the back of the E700 Mini:
- Power Connect DC power supply to E770
- Cash Drawer Insert the cable from cash drawer to connect with cash register
- Audio Jack Allows hearing impaired to connect assistive listening device
- USB Host Connect USB device
- LAN Used for bi-directional Ethernet connections
Push SIM card ejector into the needle hole on the SIM card tray to eject
SIM card:
MicroSD Card and SIM card share one card tray. SIM1 is always on SIM1 slot
position. SIM2 and Micro SD card share the same slot, so SIM card tray only
supports either 1 SIM and 1 Micro SD or 2 SIM cards.
Power ON/OFF
Power on: Press and hold the Power button for three seconds until themain
screen displays normally.
Power off: Press and hold the Power button for three seconds until
theshutdown menu displays.
Select Power off. The terminal turns off aftera few seconds.
Specifications
Operation System: Android 10.0
CPU: Quad-core CortexTM-A53,1.8GHz
Memory: 2GB DDR+16GB eMMC
Main Display: 10.1 inch, 1280×800 resolution, capacitive touch screen
Payment screen3.5″
Audio: Built-in speaker, support headphone output
L-Sensor (Ambient Light Sensor): Automatically adjusts the back light
brightness of the main display.
Wireless Communication: Supports LAN, Wi-Fi®, Bluetooth® Low Energy, 3G/4G
Peripheral Ports: Power port x 1
USB A ports x 3
LAN x 1
Cash drawer x 1
Audio jack x 1
Installation and Usage Tips
- Avoid exposing the device to an excessively hot, humid, dusty, orstrong electromagnetic environment.
- Do not vibrate, shake, or drop the device.
- Do not plug or unplug any part of the device while it is powered on. This may cause damage to an internal circuit.
- Please contact PAX technical support for assistance with the device.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
FCC Regulations:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
ISED Notice
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter, except tested built-in
radios.
The County Code Selection feature is disabled for products marketed in the US/
Canada.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
PAX TECHNOLOGY LIMITED
Manufacturer: PAX Computer Technology (Shenzhen) Co.,Ltd.
Address:4/F, No.3 Building, Software Park, Second Central Science-Tech
Road, High-Tech Industrial Park, Shenzhen, Guangdong, P.R.C.
Tel: 0755-86169630
Fax: 0755-86169634
Website: http://www.pax.com.cn